IDEAL 61-807 Power Quality Analyzer

Reduce Costs and Eliminate Potential Supply Faults with this State-of-the-Art Test Equipment

We Guarantee to Have the Best Price

What's special about this power analyzer tester?

  • Use for single and 3 phase supplies
  • Power vision software included in kit
  • Push button operation makes it simple to use and set up
  • Lightweight, portable design (0.8 Kg) makes this tester a snap to carry around
  • Click for More Features

IDEAL’s ID-61-807 Power Quality Analyzer is built with components utilizing the most advanced technological equipment in electronics, incorporating some features and device performance enhancements only found in the highest quality power meters and harmonic analyzing devices. This equipment will provide many years of reliable performance with extremely accurate test results and data. More

Part #DescriptionWeightPrice
ID-61-807Power Quality Analyzer20.5 lbs
Part #DescriptionWeightPrice
ID-61-8111000AAC Power Clamp Adapters5.8 lbs
ID-61-813100AAC Power Clamp Adapters1.7 lbs
ID-61-8145AAC Power Clamp Adapters0.4 lbs
ID-61-820100AAC Power Clamp Adapter Set of 32.35 lbs
ID-61-821100AAC Clamp Adapter1.8 lbs
ID-61-457200/2K/20KAC Flexible Clamp4 lbs
  • Programmable options allow you to modify to your needs
  • Backlit screen means you can see readings in dimly lit conditions
  • True RMS so your readings are precise and accurate
  • Safety standards EN60664 EN61010 EN61036 VDE110 UL94 CAT III600Volt as per 61010
  •  Integrated real time clock assures your readings are kept on accurate time
  • 1MB data storage memory gives you space to keep your readings internally (up to 1 month of recording time)
  • Customized data collection to suit your own requirements
  • Measures: energy and harmonics, kilowatts, volt amperes, inductive reactive power, capacitive reactive power, power factor frequency, kilowatt hour
  • 100A Neutral Current Clamp included
  • Auto-detect clamps
  • Optional FIFO memory
  • Single or three-phase measurements
  • True RMS
  • Data logging (1 MB memory)
  • Auto ranging
  • Min/max/avg
  • Energy and Harmonics Program
  • PowerVision™ Software
  • Optional programs
  • Lightweight portable design
  • Easy-to-use push button operation
  • Password protected on-screen setup
  • RS-232 interface
  • 4-Channel for voltage and current measurements
  • Customized data collection
  • Real-time clock
  • Programmable trigger-points and start/stop time
  • 4 channels of voltage measurement
  • 4 channels of current measurement
  • Intelligent battery operated system
  • Power and Energy Measurements
  • Kilowatts (KW)
  • Volt amperes (VA)
  • Inductive Reactive Power (kvarL)
  • Capacitive Reactive Power (cvarL)
  • Power Factor (PF)
  • Frequency
  • Kilowatt Hours (KH)
  • Reactive Power per Hour (kvarhL, kvarhC)
  • Harmonics Measurements
  • Total Harmonic Distortion (%THD)
  • Harmonic Factorization (FFT) to 51st Harmonic
  • 2 year warranty


The 61-807 advanced test modes will assist in identifying supply irregularities that can reduce costs and in testing to enable you to correct electrical equipment supplies and eliminate distribution system problems. It’s designed to carry out testing on a variety of electrical supply systems which include 3-phase 4-wire, 3-phase 3-wire, single-phase, split phase, and on power distribution.

Included Accessories:

  • Power Quality Analyzer
  • Power supply
  • CD and Instructions
  • Hard Carrying Case
  • 4 Color coded test leads with alligator clips
  • 100A Clamp Adapter
  • 3 1000A AC Current Clamps
  • RS-232 Interface
  • Energy and Harmonics Programming Module PowerVision Analysis Software

Optional Accessories:

  • 61-810 2000/200AACC POWER CLAMP ADAP FOR 61-806/61-807 (SET OF 3)
  • 61-811 1000AAC POWER CLAMP ADAPTERS FOR 61-806/61-807 (SET OF 3)
  • 61-813 100AAC PWR CLAMP ADPTR FOR 61-806/61-807 (SET OF 3)
  • 61-814 5AAC POWER CLAMP ADAPTER FOR 61-806/61-807
  • 61-815 DISTURBANCES PROGRAM FOR 61-806 & 61-807


Ratings EN60664 EN61010 EN61036 VDE110 UL94 CAT III 600 Volt as per 61010
Supply Voltage Through an external power supplier set 120 VAC (+10% / -15%)
Frequency -50 to 60 Hz
Burden -8 VA
Operating Temperature 0° - 50°C
Measuring Circuit THREE PHASE, ARON
Safety Category II - 600 V, as per EN 61010
Voltage Measurement Measuring range: 20 to 500 V a.c. (phase-neutral) 20 to 866 V a.c. (between phases) automatic scale adjustment Other voltages: through suitable voltage transformers Frequency: 45 to 65 Hz
Display LCD; 160 x 160 pixels
RS-232 Output Serial type output
Internal Memory 256 kbytes to 1 Mb according to the model
Accuracy Voltage: 0.5 % of readout - 2 digits Current 0.5 % of readout - 2 digits
Active Power 1.0 % of readout ± 2 digits Reactive power 1.0 % of readout ± 2 digits
Accuracy Conditions Errors due to voltage and current transformer not included
Temperature Range 41° to 113° F [5° to 45° C], Power factor: 0.5 to 1
Measuring Range between 5% and 100%
Safety Standards EN 60664, EN 610110, EN 61036, VDE 110, UL 94
Dimensions 8.6" x 2.36" x 5.1" [220 x 60 x 130 mm]
Kit Weight 20.5 lbs






Did you know that we can give you a quote for most of our products, including shipping?

You can also call us toll free 866-222-0030

Questions & Answers

Do you have any questions about this product?
Let our experts and customers resolve all your doubts