Signamax™ High Density Feed-Thru Patch Panels

Professional-Grade Patch Panels for When Rack Space is Limited


What's special about these patch panels?

  • Preloaded, high-density CAT 5e and CAT6 patch panels available in either a 24 or 48-port configuration to offer installers a greater range of flexibility in limited-space applications
  • Modular design comes with shielded/unshielded couplers that can be removed, so patch panel can be populated with your choice of keystone jacks or couplers to create a unique panel scheme tailored to your specific requirements
  • Feed-Thru connectors utilize a straight-through wiring scheme to enable easier, time-saving terminations while reducing strain on the conductors
  • Click for More Features

Signamax™ Modular High-Density Patch Panels with Feed-Thru Couplers offer professional installers an easy-to-terminate shielded or unshielded solution for expanding their networks. These compact, high coupler count patch panels are ideal for applications that have limited space, yet require high-density network connectivity. Each panel is pre-equipped with 24 or 48 inline couplers rated and tested to exceed today's TIA/EIA specifications.

CAT5e Patch Panels
Part #DescriptionCoupler TypePortsRuPrice
SX-24458FTHD-C5ESignamax Cat5e High Density Feed Thru Patch PanelUnshielded241U (1.75"H)
Manufacturer Direct
SX-24458SFTHD-C5ESignamax Cat5e High Density Feed Thru Patch PanelShielded241U (1.75"H)
Manufacturer Direct
SX-48458FTHD-C5ESignamax Cat5e High Density Feed Thru Patch PanelUnshielded482U (3.50"H)
Manufacturer Direct
SX-48458SFTHD-C5ESignamax Cat5e High Density Feed Thru Patch PanelShielded482U (3.50"H)
Manufacturer Direct
CAT6 Patch Panels
Part #DescriptionCoupler TypePortsRuPrice
SX-24458FTHD-C6Signamax Cat6 High Density Feed Thru Patch PanelUnshielded241U (1.75"H)
Manufacturer Direct
SX-24458SFTHD-C6Signamax Cat6 High Density Feed Thru Patch PanelShielded241U (1.75"H)
Manufacturer Direct
SX-48458FTHD-C6Signamax Cat6 High Density Feed Thru Patch PanelUnshielded482U (3.50"H)
Manufacturer Direct
SX-48458SFTHD-C6Signamax Cat6 High Density Feed Thru Patch PanelShielded482U (3.50"H)
Manufacturer Direct
  • Includes a snap-in rear cable management bar to improve organization and cable strain relief
  • Shielded or unshielded couplers are specially engineered to provide enhanced plug to jack connection integrity, while protecting against damage from improperly inserting 4 or 6 position connectors
  • Each coupler has been rated to withstand at least 750 connector insertions to ensure the highest level of connectivity and system reliability
  • Constructed from high-quality steel to provided maximum strength and durability for fast-paced environments
  • Features a front labeling area and individually numbered ports for quick and easy identification
  • UL 94V-0 fire rated
  • UL listed
  • FCC rated
  • IEC and EN compliant
  • Exceeds ANSI/TIA/EIA specifications
  • IEEE compliant


Transmission Performance
ANSI/TIA-568-C.2: Category 5e (1–100 MHz) component specifications
ANSI/TIA/EIA-568-C.2: Category 6 (1–250 MHz) channel specifications
Transmission Media
24458FTHD-C6, 48458FTHD-C6: Unscreened twisted pair (U/UTP)
24458SFTHD-C6, 48458SFTHD-C6: Unscreened or screened twisted pair (U/STP, F/UTP, F/STP, S/UTP, S/STP, SF/UTP, SF/STP)
Jack Type 8p8c (8-position, 8-contact) “RJ45” type
Wiring Scheme Straight-thru – compatible with any wiring scheme up to 8 conductors
Panel: Steel/nickel-plated steel
Cable management bar: Unscreened: steel/plastic
Screened: nickel-plated steel
Coupler housing: Unscreened: high impact thermoplastic, ABS UL94V-0 fire retardant
Screened: screening case: copper C2680, 0.25-mm (0.0098-in), 100-μin nickel-plated
Contact holder: high impact thermoplastic, PBT UL94V-0 fire retardant
Jack contacts: Phosphor bronze 5100W temper wire, min 50 μin of gold plating over 100-μin nickel plating
Insulation resistance: Min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
Spring wire contact resistance: Max 20 mOhm
DC contact resistance: Max 0.1 Ohm
Insertion life: Min 750 mating cycles with FCC compliant 8p8c plug
Contact force: Min 100 g each contact with FCC compliant 8p8c plug
Plug retention force: Min 50 N (11 lbf) for 60±5 s
Footprint Standard keystone footprint
Mounting Dimensions
Panel – 19-in rack mountable: 24458: H 1.75 in (1 RMU)
48458: H 3.0 in (2 RMU)
Inline couplers: W 14.6 mm H 16.2 mm D 29.4 mm
W 0.58 in H 0.64 in D 1.16 in
Environmental Conditions
Storage temperature: -40 °C – +68 °C (-40 °F – 154 °F)
Operating temperature: -10 °C – +60 °C (-14 °F – 140 °F)
Humidity: 10 %–90 % RH
Compliance ANSI/TIA/EIA-568-C.2, FCC Part 68 Subpart F, UL 1863, IEC 60603-7
Applications X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASET2, 1000BASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD
Warranty 5-year limited component warranty





Did you know that we can give you a quote for most of our products, including shipping?

You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)>

Questions & Answers


Can you provide the Country of Origin (or country of manufacture) for this item.

Asked by Anonymous user on 10.48 AM Thursday, 05 January, 2017

  • - These products have Taiwan components but assembled in USA TAA Compliant

    Anonymous user on 11.11 AM Monday, 20 February, 2017

Does this panels have female RJ45 connectors on both sides (front and back)?

Asked by Anonymous user on 03.18 PM Tuesday, 25 July, 2017

  • - Hello, Yes it is Female ? Female / front and back.

    andrew b. on 05.41 PM Monday, 31 July, 2017

Do you have any questions about this product?
Let our experts and customers resolve all your doubts