Smart and Easy Rack Cable Management with Neat-Patch®

By: CableOrganizer®

Front, Right, Covered, Outside

Have you reached the point where it hurts just to look at the tangled network cables spilling from the rear of your server rack? Where you feel your blood pressure spiking every time you need to isolate a single cable among scores of identical ones? And is the disorganization just too embarrassing to walk clients or visitors through your server room?

Luckily, CableOrganizer® has a solution. Allow us to introduce you to Neat-Patch®, the rack cable management system that's restoring lost time, money and sanity to IT managers and network installers around the world. With a design that's heavy on common sense and simplicity, the Neat-Patch® installs quickly to transform structured cabling nightmares into rows of perfectly ordered patch cords. And we would know — we're Neat-Patch® users ourselves.

What exactly can the Neat-Patch® do for your data center? Here are a few of our favorite benefits:


Don't get us wrong — long patch cords have their place, but we think it's more than a little wasteful to use a 7-foot cable to bridge the gap between patch panel and switch ports that are only a foot or so apart. The Neat-Patch® system is based on 2-foot patch cords, which are a far cry from the bulky, needlessly long 7 and 10-foot patch cables that are often spec'd for LAN server installations.

Think of how much extra money you're spending on cable you don't even need. Add to that the cost of all the cable management that's insufficiently “managing” those tens or hundreds of feet of unnecessary copper cabling. When the expense of a major industry leader's long patch cords and cable management troughs is pitted against the price of Neat-Patch® signature deep-pocket cable manager and 2-foot cables, Neat-Patch® is the undisputed winner, cutting costs by as much as 50%. Hundreds or even thousands of dollars freed for better uses… makes you think, doesn't it?


In addition to saving you money, the Neat-Patch® 2-foot patch cords are also the perfect length to form exactly one loop — no more, no less. These single-coil circuits not only eliminate cable strain, but also promote optimum bandwidth within your network. As a matter of fact, Neat-Patch® complies with BICSI (Building Industry Consulting Service International) recommended network cable bend radius standards.


Many IT managers don't realize it, but there is hidden “prime real estate” in server racks that can be maximized just by installing a Neat-Patch®. Long patch cables are too bulky for proper management; they have nowhere to go but down and out. This tends to cause disorganized mess every time. On the other end of the spectrum, Neat-Patch® enables you to organize its short, single-coil patch cords within the rack itself.

The Neat-Patch® deep-pocket cable managers are rack mounted horizontally between patch panels and their corresponding network switches, containing the single loop of cable that results from each connection. No overflowing vertical cable channels — just perfectly organized rows of patch cables.

Curious about how far you can stretch your available rack space? With Neat-Patch®, up to 384 single-coil circuits can be housed within a 7-foot rack… and you'll still have room left over for rack mount UPS and a fiber panel.


Neat-Patch® sets you up for successful network management from the very start. Why waste time digging through hundreds of identical tangled cables to find the right one? A Neat-Patch® single-coil circuit can be traced in a second, literally. And they're equally easy to replace. Need we say more?




Front, Right, Covered, Outside
Front, Right, Covered, Outside

Shop at CableOrganizer® to purchase Neat-Patch® today!

Related Items