• MG Chemicals Super wash cleaner - icon
    • |||videoviewer>player|||

MG Chemicals MGC-406B Super Wash Cleaner/ Degreaser 15 oz

Quick Dry Super Wash Removes Flux From Your PCB In An Instant

MGC-406B-425G
Qty:  

What's special about this cleaner / degreaser?

  • Perfect for light oil and residue removal as well as dissolved flux.
  • Requires very little dry time, so you can work faster
  • A good choice for use on electrical devices, components, pc boards, or any machinery.
  • Click for More Features

MGC-406B Super Wash Cleaner/ Degreaser is an excellent choice for removing the residue from flux cleaner as well as the flux itself that may still be left behind on the printed circuit board. Super Wash is available in aerosol form and is dries very quickly, so your board is ready for use almost immediately after rinsing.

Part # Description Weight Price
MGC-406B-425G MG Chemicals Super Wash Cleaner 1.35 lbs
Qty:  
Manufacturer Direct
  • Works well to rinse off other slower drying solvents
  • Super Wash 406B is safe on plastics
  • 100% ozone friendly
  • Leaves behind no residue which means when you spray this, there is no more cleaning to do.
  • Non toxic means it is safe for users
  • Non conductive aerosol
  • One year warranty

    • * May not be used on live circuits as this is a flammable product

    Physical and Chemical Properties
    Weight 15 oz can weighs 1.35 lbs
    Physical State Aerosol
    Odor Mild hydrocarbon
    Solubility Insoluble
    Evaporation Rate Rapid
    Boiling Point 55°C
    Specific Gravity 0.80
    Vapor Pressure 47 PSI @ 21°C
    Vapor Density 1.5 (Air = 1)
    pH 7
    Stability and Reactivity
    Stability Stable at normal temperatures and pressures
    Conditions to Avoid Temperatures over 40°C, ignition sources, and incompatible substances
    Incompatibilities Alkali and alkaline earth metals; powdered aluminum, zinc, magnesium, and beryllium; and strong oxidizing agents
    Polymerization Will not occur
    Decomposition Halogens, halogen acids, possibly carbonyl halides, carbon dioxide, carbon monoxide
    Exposure Controls
    Routes of Entry Eyes, ingestion, inhalation, and skin
    Ventilation Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure limits
    Personal Protection Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective clothing to prevent skin contact. Use a NIOSH approved respirator when necessary
    Fire Fighting Measures
    Flash Point -29°C
    LEL / UEL 1 / 7
    Extinguishing Media Use water spray, dry chemical, carbon dioxide, or chemical foam
    General Information Will burn if involved in a fire. Containers may explode in the heat of a fire. Highly flammable vapors are heavier than air and may accumulate in low areas. Flash back along vapor trail is possible
    Hazards Identification
    WHMIS Codes A, B5, D2B
    NFPA Ratings Health 2, Flammability 3, Reactivity 0
    HMIS Ratings Health 2, Flammability 4, Reactivity 0
    Eyes May cause mild eye irritation
    Skin May cause mild skin irritation
    Inhalation May cause irritation of respiratory tract. Vapor reduces amount of oxygen available for breathing
    Ingestion Aspiration hazard. May cause weakness and gastrointestinal tract irritation
    Chronic None known
    Manuals

     

    Related Articles

     

    How-To Corner

     

    Request A Quote

    Did you know that we can give you a quote for most of our products, including shipping?

    You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)

    Questions & Answers

    Do you have any questions about this product?
    Let our experts and customers resolve all your doubts