MGC-403A Super Cold 134A

Freezes to -51°C On Contact


What's special about this spray?

  • This spray is designed to quickly and easily remove adhesives or glue from pcb boards
  • Effective at removing the glue and adhesives that stay behind from labels that may have been removed
  • Keeps your electronic components from heat damage during soldering
  • Excellent at locating thermal or “hot” intermittent faults on your electronic components and physical cracks in your PCB
  • One year manufacturer warranty
  • Click for More Features
RoHS Compliant

MGC-403A Super Cold 134A Spray is made for finding thermal or "hot" intermittent faults on your electronic components, PCB cracks, and cold solder joints. In addition, the frigid air protects heat-sensitive components during soldering. As an added benefit, the spray will freeze gum, glues and adhesives so that you can remove it effortlessly.

Part #DescriptionWeightPrice
MGC-403A-400MG Chemicals Super Cold 400g (14 oz)1.4 lbs
Manufacturer Direct
  • An ozone safe aerosol which means its good for the planet
  • Locates physical cracks in your PCB board circuitry
  • Freezes glues and adhesives for quick and easy clean up
  • Non flammable and non conductive
  • Leaves no residue behind which means you are not having to clean up after use
  • The valve has variable spray control so you decide how little or how much to use
  Physical and Chemical Properties
Physical State : Aerosol
Odor : Ethereal
Solubility : 0.15%
Evaporation Rate : 1 (Ether = 1)
Boiling Point : -26.2°C
Specific Gravity : 1.22
Vapor Pressure : 86 PSI @ 21°C
Vapor Density : 3.5 (Air = 1)
pH : 7
  Stability and Reactivity
Stability : Stable at normal temperatures and pressures. Do not mix with oxygen or air above atmospheric pressure. Any source of high temperature, such as lit cigarettes, flames, or welding may yield toxic and/or corrosive decomposition products
Conditions to Avoid : Temperatures over 40°C, ignition sources, and incompatible materials
Incompatibilities : Alkali and alkaline earth metals, powdered aluminum, zinc, magnesium, and beryllium
Polymerization : Will not occur
Decomposition : Halogens, halogen acids, possibly carbonyl halides
  Environmental Impact Data : (Percentage by Weight)
CFC : 0
HFC : 100
Cl. Solv. : 0
VOC : 0
HCFC : 0
ODP : 0
  Exposure Control
Routes of Entry : Eyes, ingestion, inhalation, and skin
Ventilation : Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure limits
Personal Protection : Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective clothing to prevent skin contact. Use a NIOSH approved respirator when necessary
  Fire Fighting Measures
Auto-ignition Temperature : > 750°C
Extinguishing Media : Use water spray, dry chemical, carbon dioxide, or chemical foam
General Information : This material may become flammable when mixed with air under pressure and exposed to strong ignition sources. Containers may explode in the heat of a fire
  Hazards Identification
WHMIS Codes : A
NFPA Ratings : Health 1, Flammability 0, Reactivity 0
HMIS Ratings : Health 1, Flammability 0, Reactivity 0
Eyes : Contact with eye may cause severe tissue damage because of frostbite
Skin : Contact with liquid or escaping vapor can cause frostbite, indicated by pallor or redness, loss of sensation, and swelling
Inhalation : Low in toxicity in concentrations up to 40000ppm. When oxygen levels in air are reduced to 12% - 14% symptoms of asphyxiation will occur: loss of coordination, increased pulse rate, and deeper respiration
Ingestion : Improbable due to low boiling point (-26.2C)
Chronic : Over exposure may cause dizziness and loss of concentration. At higher levels, CNS depression and cardiac arrhythmia may result from exposure




Did you know that we can give you a quote for most of our products, including shipping?

You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)>

Questions & Answers

Do you have any questions about this product?
Let our experts and customers resolve all your doubts