Signamax® Managed Switches with Redundant Power Supplies

Allows Precise Network Management for Smooth, Efficient Performance


What's special about these ethernet switches?

  • Provides a hub for connecting up to 24 network segments and devices in commercial applications.
  • Integrated redundant power supply provides a backup plan in case of power failure, ensuring your work will not be lost.
  • Features a comprehensive management package that includes a web browser, local console, Telnet remote terminal connections, and more; This switch is also compatible with several network management systems.
  • Accepts copper and fiber connections for universal compatibility within your server system.
  • Click for More Features
  • RoHS Compliant

Managed Network with Redundant Power Supplies by Signamax® provide uninterrupted network performance in high density commercial and industrial applications. While other switches go down with all other equipment in the event of a power failure, these switches contain a backup power source, keeping all connected devices in touch with the Ethernet. These switches are available in 4 port configurations that support copper and fiber, guaranteeing a place in your modern networking setup.

Part # Ports Dimensions Weight Price
SX-065-77344TR (24) RJ-45 10/100 Ethernet (4) 1000BaseT Ports 17.4" W x 14.1" D x 1.74" H (442 x 360 x 44.2mm) 7.5 lbs (3.4 kg)
Manufacturer Direct
  • Bandwidth rate control prevents server overloading for efficient network performance.
  • Each port may be programmed with its own MAC address for individual access authorization.
  • POE capability (RJ-45 equipped models) saves energy by providing power to compatible devices without using an AC outlet.
  • Mounts onto any standard 19" rack for easy installation into any modern setup.
  • Ideal for networking servers, computers, printers, and other network devices in commercial applications.

  • Redundant Power Supply - A second power supply circuit sometimes specified for systems used in critical applications. Redundancy is useful where unexpected power failures can cause a major system to fail, often at great expense. Redundant power supplies could be fed from different AC power (mains) circuits for maximum system reliability. Power supplies are usually "diode or'ed" and should be hot swappable. A "redundant capacity" supply is usually a single supply with built-in redundancy included and is not hot swappable, but each supply voltage is duplicated allowing the user to schedule down time to replace the supply.

    PORTS 24 - RJ-45 10/100BaseT/TX ports
    (065-7734R, 065-77344TR, and 065-77344DMR)
    24 - 100Base SFP receptacles + 4 - 10/100/1000BaseT/TX Dual Media ports with SFP receptacles (model 065-
    LED STATUS INDICATORS Per Switch: Power Status 1 & 2
    Per Port:
    10/100BaseT/TX, 100Base SFP: Link/ACT
    10/100/1000T/TX, SFP: Link/ACT
    Gigabit Ethernet SFP: SFP PoE
    Latency <4.5 μs (LIFO)
    Throughput, per port 1.48810 million pps (64-byte packets)
    Switch Fabric Speed 12.8Gbps (non-blocking, wire speed performance)
    MAC Address Capacity 8 K MAC addresses
    Per-port programmable MAC address locking
    Up to 24 Static Secure MAC addresses per port
    Frame Buffer 3 Mbits
    Port Mirroring Inbound and Outbound
    Recover-Ring™ Supports recovery of ring-based network architecture in <15ms. Proprietary
    MAC-based Trunking 2 Fast Ethernet +1 Gigabit Ethernet trunking groups; up to 4 ports for each group
    GVRP/GARP IEEE 802.1Q with
    Multicasting IP Multicast Filtering via IGMP Snooping V1, V2 & V3
    IEEE 802.1Q Tag-based VLAN; up to 4K active VLANs possible
    QoS CAPABILITIES 802.1p QoS with four level priority queue (Strict Priority and Weighted Round Robin scheduling, bandwidth per port)
    Bandwidth Rate Limiting Ingress rate limits:
    1 Kbps up to 100 Mbps for 10/100 ports, up to 1 Gbps for 1000Base ports
    Egress rate limits:
    1 Kbps up to 100 Mbps for 10/100 ports, up to 1 Gbps for 1000Base ports
    Broadcast Storm Suppression:
    Multicast/Broadcast/Unknown-Unicast Storm suppression
    Access Methods RS-232C DB-9 local console serial port, Telnet remote access, SNMP agent, and Web browser
    Software Upgrade Capability TFTP
    Software Upgrade Capability Via TFTP
    SNMP v1, v2, and v3 Network Management RFC 1213 MIB (MIB-2)
    RFC 1757 RMON MIB
    Statistics Group 1
    History Group 2
    Alarm Group 3
    Event Group 9
    RFC 1493 Bridge MIB
    VLAN MIB (IEEE802.1Q/RFC2674)
    Private MIB
    Industry Standards FCC Part 15 Class A
    CE Mark Class A
    Maximum Switch Power Consumption 35.4 Watts maximum
    AC Power Input Range 100~240VAC, 50~60Hz
    Hot Swappable Power Supplies Yes
    Operating Temperature 32°F to 113°F (0°C to 45° C)
    Storage Temperature -14°F to 185°F (-10°C to 45° C)
    Operating Humidity 5 to 95% RH, non-condensing
    Applicable Standards IEEE 802.3 10BaseT
    IEEE 802.3u 100BaseTX
    IEEE 802.3ab 1000BaseT
    IEEE 802.3z 1000BaseSX/LX (via SFP module)
    IEEE 802.1p Priority (Quality of Service [QoS])
    IEEE802.1s Multiple Spanning Tree Protocol
    IEEE802.1w Rapid Spanning Tree Protocol
    IEEE802.1D Spanning Tree Protocol compatible
    IEEE 802.1Q Tagged VLAN with GVRP
    IEEE 802.3x Flow Control
    IEEE 802.1x Access Control
    Dimensions 17.4" W x 14.1" D x 1.74"( H
    442 x 360 x 44.2mm)
    Housing Material Metal
    Weight 7.5 lbs. (3.4 Kg)
    Warranty 5 Years


    Related Articles


    How-To Corner


    Request A Quote

    Did you know that we can give you a quote for most of our products, including shipping?

    You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)

    Questions & Answers

    Do you have any questions about this product?
    Let our experts and customers resolve all your doubts