What's special about these corning UniCam fiber connectors?
- ST, SC, LC connectors for easy, fast, and reliable fiber termination
- Field fiber and fiber stub get fully protected from environmental factors
- No polishing, no epoxy, no power cords, or polishing films required
- Only 2 minutes tops per fiber for installation reduces labor cost
- Compliant with ANSI/TIA/EIC-568-13.3
- Click for More Features
Corning UniCam® connector is the perfect solution for all field installable multi mode fiber optic connector requirements. The quick installation reduces overall labor costs of connectorization making these UniCam multimode fiber optic connectors cost effective for all fiber applications, from the main-cross connect to the workstation.
The Unicam® connector can best be described as a mini pigtail. It contains a factory installed fiber stub that is fully bonded in the ferrule. The other end is precisely cleaved and placed into the patented alignment mechanism of our mechanical splice. Both the field fiber and the fiber stub are fully protected from environmental factors. This labor saving field installable connector requires no polishing unlike other non epoxy connectors.
- Corning Unicam Specs (PDF)
|Approval and Listings||Passed EIA/TIA 568-B.3||Passed EIA/TIA 568-B.3||Passed EIA/TIA 568-B.3|
|Intermateability||Connectors are FOCIS compliant with TIA/EIA 604-10A and IEC61754-20|
|Product Type||Field-Installable Connectors||Field-Installable Connectors||Field-Installable Connectors|
|Fiber Category||62.5 µm MM (OM1)||62.5 µm MM (OM1)||62.5 µm MM (OM1)|
|Operation||-40°C to 75°C exceeding EIA/TIA 568-B.3 (-40°F to 167°F exceeding EIA/TIA 568-B.3)|
|Durability||≤ 0.2 dB change by 500 rematings, FOTP-21|
|Temperature Cycling||≤ 0.3 dB IL, -40°C to +75°C, 21 cycles||—||≤ 0.3 dB IL, -40°C to +75°C, 21 cycles|
|Nominal Fiber Outer Diameter||125 µm||125 µm||125 µm|
|Tensile Strength Jacketed Cable||50 N, change ≤ 0.2 dB, FOTP-6 (11 lb, change ≤ 0.2 dB, FOTP-6)|
|Tensile Strength 900 µm Cable||4.9 N, change ≤ 0.2 dB, FOTP-6 (1.1 lb, change ≤ 0.2 dB, FOTP-6)|
|Insertion Loss, Typical||0.3 dB||0.3 dB||0.1 dB|
|Insertion Loss, Maximum||0.75 dB||0.75 dB||0.5 dB|
|Reflectance||≤ -26 dB||≤ -26 dB||≤ -26 dB|
|RoHS||Free of hazardous substances according to RoHS 2002/95/EG|
HOW-TO CORNER -
- How to Test Fiber Optics for Continuity
- How to Test Fiber Optic Cables for Optical Loss
- How to Use Heat Shrink Tubing
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)>
Questions & Answers
Do you have any questions about this product?
Let our experts and customers resolve all your doubts