What's special about this 6:1 Heat Shrink Tubing?
- Very high shrink ratio of 6:1, shrinks to 1/6th of its size to accommodate large bulky cables or adapters.
- Tubing is lined with a hot melt adhesive that melts to create a weatherproof seal.
- Conforms to UL94V-0 Standards of flammability
- Conforms to MIL-DTL-23053/15, Class 1 specifications for adhesive lined heat shrink tubing
- Click for More Features
This 6:1 ratio heat shrink tubing is ideal for creating weatherproof seals for large cable bundles. This tubing conforms to UL94V-0 Standards for flammability and is Military specified for adhesive lined heat shrink tubing under, MIL-DTL-23053/15, Class 1. This tubing shrinks down to 1/6th of its size to accommodate large cable assemblies and adapters.
|6:1 Adhesive Heat Shrink Tubing - 4FT Sticks|
||W6A0.75-4FT||6:1 Economical Adhesive Lined Heat Shrink Tube, .75", 4 ft Stick|
||W6A1.00-4FT||6:1 Economical Adhesive Lined Heat Shrink Tube, 1", 4 ft Stick|
||W6A1.30-4FT||6:1 Economical Adhesive Lined Heat Shrink Tube, 1.3", 4 ft Stick|
||W6A1.75-4FT||6:1 Economical Adhesive Lined Heat Shrink Tube, 1.75", 4 ft Stick|
||W6A2.00-4FT||6:1 Economical Adhesive Lined Heat Shrink Tube, 2", 4 ft Stick|
||W6A2.75-4FT||6:1 Economical Adhesive Lined Heat Shrink Tube, 2.75", 4 ft Stick|
||W6A3.50-4FT||6:1 Economical Adhesive Lined Heat Shrink Tube, 3.5", 4 ft Stick|
||W6A4.70-4FT||6:1 Economical Adhesive Lined Heat Shrink Tube, 4.7", 4 ft Stick|
|MIL SPECS||UL||CSA||MATERIAL||RECOVER TEMP.||CONTINUOUS OPER. TEMP.||FLAMMABILITY|
|MIL-DTL-23053/15, Class 1||-||-||Polyolefin||120°C
|-55°C to 110°C
(67°F to 230°F)
Meets UL-94, V-0 Flame Rating
|ORDER REF. NO.
METRIC / IMPERIAL
|0190 / 0750||19.0 / 0.750||3.2 / 0.125||3.2 / 0.123||121cm||48"|
|0330 / 1300||33.0 / 1.300||5.5 / 0.220||3.4 / 0.135||121cm||48"|
|0444 / 1750||44.4 / 1.750||7.4 / 0.290||3.6 / 0.140||121cm||48"|
|0508 / 2000||50.8 / 2.000||8.3 / 0.330||4.3 / 0.170||121cm||48"|
|0698 / 2750||69.8 / 2.750||11.7 / 0.460||4.8 / 0.190||121cm||48"|
|0889 / 3500||88.9 / 3.500||17.1 / 0.673||4.3 / 0.170||121cm||48"|
|1194 / 4700||119.4 / 4.700||22.9 / 0.900||4.8 / 0.190||121cm||48"|
|Tensile Strength||ASTM D412, ISO 037||2100 psi (14.5 MPa)|
|Elongation||ASTM D412, ISO 037||600%|
|Elongation after Heat Aging
(168 hrs at 150°C)
|Heat Shock (4 hrs at 225°C)||ASTM D2671||No cracking or flowing|
|Longitudinal Change||ASTM D2671||+1%, -10%|
|Low Temperature Flexibility
(4 hrs at -55°C)
|ASTM D2671||No cracking|
|Specific Gravity||ASTM D792||1.10|
|Hardness (Shore D)||ASTM D2240||500|
|Dielectric Strength||ASTM D149, IEC 243||500 V/MI (20 KV/mm)|
|Dielectric Voltage Withstand
(2500 V, 60 Hz, 1 min)
|UL 486D||No breakdown|
|Volume Resistivity||ASTM D257||1016 ohm-cm|
|Fluid Resistance||MIL-DTL-23053||Good to excellent|
|Fungus Resistance||ASTM G21||No growth|
|Copper Corrosion||ASTM D2671||No corrosion|
|Water Absorption||ASTM D570||0.1%|
|Adhesive Lap Sheer
(1 in/min at 23°C)
|ASTM D1002||125 ps (.875 Mpa)|
|Adhesive Softening Point||ASTM E28||92°C/-5°C|
|Adhesive Peel Strength
(300 in/min at 23°C)
• to steel, aluminum, P. E.
|Adhesive Blocking (30°C)||ASTM D1146||No blocking|
|Water Penetration||STM 706||No penetration after 236 hrs of continuous immersion|
Limiting Oxygen Index (LOI)
The ratio of how much oxygen - as compared to other gases - needs to be present in the air surrounding a particular material in order for that material to burn. The fact that Earth's normal atmospheric air contains around 21% oxygen is used a reference point when materials are classified into burn categories that are based on Limiting Oxygen Index. Substances that are combustible in air containing less than 21% oxygen are considered flammable, while those that burn in the range of anything greater than 21% but less than 28% are typically labeled "slow burning". Any material with an LOI that exceeds 28% is classified as self-extinguishing.
In the table below, you'll find a list of polymers commonly found in our heat shrink tubing and braided sleeving products, along with their LOIs and the burn categories each falls into.
|ECTFE (Ethylene chlorotrifluoroethylene)||Halar||64%||Self Extinguishing|
|Nylon 6:6||N/A||Ranges fron 24-29%||Slow Burning to Self Extinguishing|
|PET (Polyethylene Terephthalate)||Mylar (film), Dacron (fiber)||Ranges from 21-34%||Slow Burning to Self Extinguishing|
|Polypropylene (PP)||polythene (in the UK)||17%||Flammable|
|Polytetrafluoroethylene (PTFE)||Teflon||95%||Self Extinguishing|
|Polyvinyl Chloride (PVC)||N/A||Ranges from 45-49%||Self Extinguishing|
Request A Quote
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)
Questions & Answers
Do you have any questions about this product?
Let our experts and customers resolve all your doubts