Nylon® Multifilament Braided Sleeving
Full Coverage, Soft, Supple, Strong and Attractive
What's special about Nylon® Multifilament?
- Lightweight and flexible, yet cuts easily with aHot Knife or with scissors.
- Resists automotive fluids and offers excellent abrasion resistance.
- Soft and pliable
- Click for More Features
-
NM's fabric-like softness and flexibility hide surprisingly tough specifications. The high coverage sleeving meets or exceeds military specifications MIL-I-47203(MI) and MIL-S-47053(MI). Nylon Multifilament is highly resistant to abrasion, cuts, common automotive and marine chemicals, UV damage and vibration. It will not rot or retain moisture.
Please Note: Nylon Multifilament is NOT expandable. Please see our Nylon Monofilament for an expandable nylon braided sleeving.
Splicing may occur during the production of both Minspools and Bulk sleevings. Two or three lengths may create a full spool.
Continuous lengths are available in most sizes at an additional 10% surcharge. Please specify if you require continuous lengths.
| MINISPOOLS | ||||
|---|---|---|---|---|
| Part # | Nomnal Size | Spool Length | Color | Price |
| MSNYMF0125 | 1/8" | 225' | Black | Manufacturer Direct
|
| MSNYMF01875 | 3/16" | 200' | Black | Manufacturer Direct
|
| MSNYMF025 | 1/4" | 200' | Black | Manufacturer Direct
|
| MSNYMF0312 | 5/16" | 125' | Black | Manufacturer Direct
|
| MSNYMF0375 | 3/8" | 125' | Black | Manufacturer Direct
|
| MSNYMF050 | 1/2" | 100' | Black | Manufacturer Direct
|
| MSNYMF0625 | 5/8" | 75' | Black | Manufacturer Direct
|
| MSNYMF075 | 3/4" | 75' | Black | Manufacturer Direct
|
| MSNYMF0875 | 7/8" | 50' | Black | Manufacturer Direct
|
| MSNYMF100 | 1" | 50' | Black | Manufacturer Direct
|
| MSNYMF125 | 1-1/4" | 50' | Black | Manufacturer Direct
|
| MSNYMF150 | 1-1/2" | 50' | Black | Manufacturer Direct
|
| MSNYMF200 | 2" | 50' | Black | Manufacturer Direct
|
| BULK | ||||
|---|---|---|---|---|
| Part # | Nominal Size | Spool Length | Color | Price |
| BSNYMF0125 | 1/8" | 1,000' | Black | Manufacturer Direct
|
| BSNYMF01875 | 3/16" | 1,000' | Black | Manufacturer Direct
|
| BSNYMF025 | 1/4" | 500' | Black | Manufacturer Direct
|
| BSNYMF0312 | 5/16" | 500' | Black | Manufacturer Direct
|
| BSNYMF0375 | 3/8" | 500' | Black | Manufacturer Direct
|
| BSNYMF0625 | 5/8" | 250' | Black | Manufacturer Direct
|
| BSNYMF075 | 3/4" | 250' | Black | Manufacturer Direct
|
| BSNYMF0875 | 7/8" | 200' | Black | Manufacturer Direct
|
| BSNYMF100 | 1" | 200' | Black | Manufacturer Direct
|
| BSNYMF125 | 1-1/4" | 125' | Black | Manufacturer Direct
|
| BSNYMF150 | 1-1/2" | 100' | Black | Manufacturer Direct
|
| BSNYMF200 | 2" | 100' | Black | Manufacturer Direct
|
Under the hood or across the floor, Nylon® Multifilament (NM) is the perfect sleeving product for protecting and improving the appearance of wires and cables. NM has been used in military wire harness applications for many years.
The wide operating temperature range allows NM to protect delicate wiring in engine compartments and near exhaust systems.
- UV resistant
- Operating Temp. -49°F to 248°F
- Melt Temp. 250°C / 482°F
- Excellent for sound and rattle control
- Compliant with European Union's Restrictions on the use of Hazardous Substances (RoHS) Directive
Click here for Specialty Technical Data Sheet on Nylon Multifilament (PDF) 
View Measurement Conversion Chart
| Abrasion | |
|---|---|
| Abrasion Resistance (ASTM D-4157) | Extremely High |
| Abrasion Test Machine | Taber 5150 |
| Abrasion Test Wheel | Calibrase H-18 |
| Abrasion Test Load | 500g |
| Room Temperature | 70°F |
| Humidity | 58% |
| Much Pulling Of Fibers - Very Visible Wear | 20 Test Cycles |
| Wear Pattern Continues | 400 Test Cycles |
| Wear Pattern Continues | 900 Test Cycles |
| Wear Pattern Continues | 1,400 Test Cycles |
| Hole Completely Through Material Destroyed | 3,200 Test Cycles |
| Pre-Test Weight | 11,759.5 mg |
| Post-Test Weight | 10,990.2 mg |
| Test End Loss Of Mass Point Of Destruction | 769.3 mg |
| Flammability | |
| Rating | N/A |
| Moisture Absorption (%) | 1.5 |
| Smoke D-Max (ASTM E-662) | |
| Toxicity Index (USN 713) | |
| Chemical Resistance | |
| Aromatic Solvents | No Effect |
| Aliphatic Solvents | No Effect |
| Chlorinated Solvents | No Effect |
| Weak Bases | No Effect |
| Salts | No Effect |
| Strong Bases | Little Effect |
| Salt Water (O-S-1926) | No Effect |
| Hydraulic Fluid (MIL-H-5606) | No Effect |
| Lube Oil (MIL-L-7808) | No Effect |
| De-Icing Fluid (MIL-A-8243) | No Effect |
| Strong Acids | Severely Affected |
| Strong Oxidants | Severely Affected |
| Esters / Keytones | Little Effect |
| UV Light | Little Effect |
| Petroleum | Little Effect |
| Fungus (ASTM D-2863) | Affected |
| Outgassing | High |
| Oxygen Index (ASTM D-2863) | 22 |
| Halogon Free | Yes |
| Operating Temperatures | |
| Melt Point (ASTM D-2117) | 250° C (482° F) |
| Maximum Continuous (MIL-I-23053) | 120° C (248° F) |
| Minimum Continuous | -45° C (-49° F) |
| Physical Properties | |
| Multifilament Thickness | N/A |
| Recommended Cutting | Scissors |
| Stock Colors | 1 |
| Wall Thickness | 0.03 |
| Tensile Strength PSI (ASTM D-2256) | 75,000 |
| Specific Gravity (ASTM D-792) | 1.14 |
| Military Specifications | Meets or Exceeds AA-59301 |
| Tenacity (GM/Denier) (ASTM D-4157) | |
| Typical Elongation (ASTM D-2256-80) | |
| Break | |
| 3g / Denier | |
| Hard Vacuum Data (ASTM E-595) at 10-5 torr | |
| TML | |
| CVCM | |
| WVR | |
Manuals
Related Articles
How-To Corner
Request A Quote
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)
Questions & Answers
Can you use a torch on this and shrink it down to fit the wire
- Thank you for your question. This item is not heat shrinkable. Please visit our heat shrinkable sleeving: http://www.cableorganizer.com/heat-shrink-tubing/
Do you have any questions about this product?
Let our experts and customers resolve all your doubts