Klein Tools Insulated Tools


P1000522
Qty:  

What's special about these insulated tools?

  • Durable molded insulation meets or exceeds ASTM F1505-16 and IEC 60900:2018 standards for insulated tools
  • Clearly marked with the official 1000-volt rating symbol
  • Flame retardant, impact-resistant, bright orange outer coating with two layers of insulation provide protection against electric shock
  • Heavy-duty, induction hardened cutting knives cut ACSR, screws, nails, and most hardened wire
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • High-leverage design for 36-percent greater cutting power than other plier designs
  • Hot-riveted joint for smooth action and no handle wobble
  • Forged steel for maximum durability

WARNINGS:


- ALWAYS wear approved eye protection.
- ALWAYS inspect your tools before use. Do NOT use if orange coating cracks, breaks, or becomes damaged. Destroy tool if white layer shows through orange layer. Whenever possible, ALWAYS de-energize lines and equipment prior to working on them. These tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Whenever possible, ALWAYS de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- Do NOT use to pry or chisel.

Part # IMG Description Price
P1000522 Insulated Pliers, Heavy-Duty Diagonal-Cutting, 8-Inch Insulated Pliers, Heavy-Duty Diagonal-Cutting, 8-Inch
Qty:  
Manufacturer Direct
P1000524 Insulated Pliers, Heavy-Duty Diagonal-Cutting, 8-Inch Insulated Pliers, Heavy-Duty Diagonal-Cutting, Angled 8-Inch
Qty:  
Manufacturer Direct
P1000530 Insulated Pliers, Heavy-Duty Diagonal-Cutting, 8-Inch Insulated Lineman's Pliers, 9-Inch
Qty:  
Manufacturer Direct
P1000546 Long Nose Pliers, Insulated, 6-Inch
Qty:  
Manufacturer Direct
P1000550 Pliers, Long Nose Side-Cutters, Insulated, 7-Inch
Qty:  
Manufacturer Direct
P1000565 Cutting Crimping Pliers, Insulated, 9-Inch
Qty:  
Manufacturer Direct
P1000566 Side Cutting Pliers, New England Insulated, 9-Inch
Qty:  
Manufacturer Direct
P1000573 Insulated Pliers, Diagonal Cutters, 7-Inch
Qty:  
Manufacturer Direct
P1000577 8-Inch Insulated Pliers, Diagonal Cutters
Qty:  
Manufacturer Direct
P1000591 Diagonal Cutting Pliers, Insulated, Angled, 8-Inch
Qty:  
Manufacturer Direct
P1000614 10-Inch Pump Pliers, Insulated
Qty:  
Manufacturer Direct
P1001310 Insulated Universal Combination Pliers, 8-Inch
Qty:  
Manufacturer Direct
P1001311 Combination Pliers, Insulated
Qty:  
Manufacturer Direct
P1001427 Diagonal Cutting Pliers, Insulated, Slim Handle
Qty:  
Manufacturer Direct
P1001428 Diagonal Cutting Pliers Angled Head
Qty:  
Manufacturer Direct
P1001429 Heavy Duty Side Cutting Pliers Insulated
Qty:  
Manufacturer Direct
P1001433 Long Nose Side Cutter Pliers 6-Inch Slim Insulated
Qty:  
Manufacturer Direct
P1001434 Long Nose Side Cut Pliers, 7-Inch Slim Insulated
Qty:  
Manufacturer Direct
P1001435 Long Nose Side Cutter Pliers, 8-In Slim Insulated
Qty:  
Manufacturer Direct
P1001453 Insulated Pliers, Slim Handle Side Cutters, 8-Inch
Qty:  
Manufacturer Direct
P1001454 Side Cutting Pliers, Slim Handle, 9-Inch
Qty:  
Manufacturer Direct
P1001821 Insulated Pump Pliers, Slim Handle, 10-Inch
Qty:  
Manufacturer Direct
KT-D203-8-INS Heavy-Duty Side-Cutting Long-Nose Pliers
Qty:  
Manufacturer Direct
KT-D203-8N-INS Heavy-Duty Side-Cutting & Skinning Long-Nose Pliers
Qty:  
Manufacturer Direct
KT-1005-INS Insulated Crimping Cutter
Qty:  
Manufacturer Direct
KT-11045-INS Klein Tools Wire Strippers - icon Insulated Wire Stripper/Cutter for 10-18 AWG
Qty:  
Manufacturer Direct
KT-11049-INS Insulated Wire Stripper/Cutter for 8-16 AWG
Qty:  
Manufacturer Direct
Part # Description Overall Length Material Application Special Features Weight Joint Type Jaw Width Nose Type Standard Style Name
P1000522 Insulated Pliers, Heavy-Duty Diagonal-Cutting,
8-Inch
8.25" (209.6 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wire Flame Retardant and Impact Resistant Handle 0.70 lb (0.32 kg) Hot-Riveted 1.188" (30.2 mm) Tapered IEC 60900 and ASTM F1505 Heavy Duty
P1000524 Insulated Pliers, Heavy-Duty Diagonal-Cutting,
Angled 8-Inch
8.25" (209.6 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wire Flame Retardant and Impact Resistant Handle 0.70 lb (0.32 kg) Hot-Riveted 1.188" (30.2 mm) Angled IEC 60900 and ASTM F1505 Heavy Duty
P1000530 Insulated Lineman's Pliers,
9-Inch
9.625" (244.5 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wire Integral Guards Help Prevent Hand Contact With Conductive Parts 1.3 lb (0.6 kg) Hot-Riveted 1.313" (33.4 mm) New England IEC 60900 and ASTM F1505 Heavy Duty
P1000546 Long Nose Pliers, Insulated,
6-Inch
6.875" (174.6 mm) Induction Hardened Steel For Work Near Energized Sources Flame Retardant and Impact Resistant Handle 0.30 lb (0.14 kg) Hot-Riveted 0.688" (17.5 mm) Long Nose IEC 60900 and ASTM F1505 Standard
P1000550 Pliers, Long Nose Side-Cutters, Insulated,
7-Inch
7.375" (187.3 mm) Induction Hardened Steel For Work Near Energized Sources Flame Retardant and Impact Resistant Handle 0.30 lb (0.14 kg) Hot-Riveted 0.688" (17.5 mm) Long Nose IEC 60900 and ASTM F1505 Standard
P1000565 Cutting Crimping Pliers, Insulated,
9-Inch
9.625" (244.5 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Integral Guards Help Prevent Hand Contact With Conductive Parts 1.3 lb (0.6 kg) Hot-Riveted 1.313" (33.4 mm) New England IEC 60900 and ASTM F1505 With Crimping
P1000566 Side Cutting Pliers, New England Insulated,
9-Inch
9.625" (244.5 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Integral Guards Help Prevent Hand Contact With Conductive Parts 1.3 lb (0.6 kg) Hot-Riveted 1.313" (33.4 mm) New England IEC 60900 and ASTM F1505 Standard
P1000573 Insulated Pliers, Diagonal Cutters,
7-Inch
7.875" (200 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Flame Retardant and Impact Resistant Handle 0.70 lb (0.32 kg) Hot-Riveted 0.969" (24.6 mm) Tapered IEC 60900 and ASTM F1505 Diagonal-Cutting
P1000577 Insulated Pliers, Diagonal Cutters,
8-Inch
8.25" (209.6 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Flame Retardant and Impact Resistant Handle 0.70 lb (0.32 kg) Hot-Riveted 1.188" (30.2 mm) Tapered IEC 60900 and ASTM F1505 Standard
P1000591 Diagonal Cutting Pliers, Insulated, Angled,
8-Inch
8.25" (209.6 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Flame Retardant and Impact Resistant Handle 0.70 lb (0.32 kg) Hot-Riveted 1.188" (30.2 mm) Angled IEC 60900 and ASTM F1505 Standard
P1000614 Pump Pliers, Insulated
10-Inch
10.25" (260.4 mm) Induction Hardened Steel For Work Near Energized Sources Secure Tongue and Groove Design For Non-Slip Grip 1.0 lb (0.5 kg) - 0.484" (12.3 mm) Pump IEC 60900 and ASTM F1505 Standard
P1001310 Insulated Universal Combination Pliers,
8-Inch
8.875" (225.4 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Integral Guards Help Prevent Hand Contact With Conductive Parts 1.0 lb (0.5 kg) Hot-Riveted 1.031" (26.2 mm) Universal IEC 60900 and ASTM F1505 Universal
P1001311 Combination Pliers, Insulated 8.875" (225.4 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Integral Guards Help Prevent Hand Contact With Conductive Parts 1.0 lb (0.5 kg) Hot-Riveted 1.031" (26.2 mm) Universal IEC 60900 and ASTM F1505 -
P1001427 Diagonal Cutting Pliers, Insulated, Slim Handle 8.25" (209.6 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Flame Retardant and Impact Resistant Handle 0.70 lb (0.32 kg) Hot-Riveted 1.188" (30.2 mm) Universal IEC 60900 and ASTM F1505 Slim Handle
P1001428 Diagonal Cutting Pliers Angled Head 8.25" (209.6 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Flame Retardant and Impact Resistant Handle 0.70 lb (0.32 kg) Hot-Riveted 1.188" (30.2 mm) Angled IEC 60900 and ASTM F1505 Slim Handle
P1001429 Heavy Duty Side Cutting Pliers Insulated 9.625" (244.5 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Integral Guards Help Prevent Hand Contact With Conductive Parts 1.3 lb (0.6 kg) Hot-Riveted 1.313" (33.4 mm) New England IEC 60900 and ASTM F1505 Heavy Duty Cutting Slim Handle
P1001433 Long Nose Side Cutter Pliers Slim Insulated,
6-Inch
6.875" (174.6 mm) Induction Hardened Steel For Work Near Energized Sources Flame Retardant and Impact Resistant Handle 0.30 lb (0.14 kg) Hot-Riveted 0.688" (17.5 mm) Long Nose IEC 60900 and ASTM F1506 Slim Handle
P1001434 Long Nose Side Cut Pliers, Slim Insulated,
7-Inch
7.375" (187.3 mm) Induction Hardened Steel For Work Near Energized Sources Flame Retardant and Impact Resistant Handle 0.30 lb (0.14 kg) Hot-Riveted 0.688" (17.5 mm) Long Nose IEC 60900 and ASTM F1506 Slim Handle
P1001435 Long Nose Side Cutter Pliers, Slim Insulated,
8-Inch
8.875" (225.4 mm) Induction Hardened Steel For Work Near Energized Sources Flame Retardant and Impact Resistant Handle 0.70 lb (0.32 kg) Hot-Riveted 1" (25.4 mm) Long Nose IEC 60900 and ASTM F1506 Slim Handle
P1001453 Insulated Pliers, Slim Handle Side Cutters,
8-Inch
8.813" (223.9 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Integral Guards Help Prevent Hand Contact With Conductive Parts 1.0 lb (0.5 kg) Hot-Riveted 1.109" (28.2 mm) New England IEC 60900 and ASTM F1505 Slim Handle
P1001454 Side Cutting Pliers, Slim Handle,
9-Inch
9.625" (244.5 mm) Induction Hardened Steel ACSR, Screws, Nails and Most Hardened Wires Integral Guards Help Prevent Hand Contact With Conductive Parts 1.3 lb (0.6 kg) Hot-Riveted 1.313" (33.4 mm) New England IEC 60900 and ASTM F1505 Slim Handle
P1001821 Insulated Pump Pliers, Slim Handle,
10-Inch
10.25" (260.4 mm) Induction Hardened Steel For Work Near Energized Sources Secure Tongue and Groove Design For Non-Slip Grip 1.0 lb (0.5 kg) Hot-Riveted 0.484" (12.3 mm) Pump IEC 60900 and ASTM F1505 Slim Handle

 

PART # Jaw Length Jaw Thickness Jaw Width Knife Length Overall Length Point Thickness
KT-D203-8-INS 2-5/16" 1/2" 1" 5/8" 8-7/8" 1/8"
KT-D203-8N-INS 2-5/16" 1/2" 1" 5/8" 8-7/8" 1/8"

 

PART # Standards
KT-1005-INS These tools meet or exceed ASTM F1505-01 and IEC 60900:2004, comply with NFPA-70E, 2004 ed., and are marked clearly with the 1000-volt rating symbol.

 

Part # Wire Size Wire Type Weight Length
KT-11045-INS 10 to 18 AWG Solid Wire 0.70 lb 6" (152mm)
KT-11049-INS 8 to 16 AWG Stranded Wire 0.70 lb 7" (178mm)
Related Articles




 

How-To Corner



 

Request A Quote

Did you know that we can give you a quote for most of our products, including shipping?

You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)

Questions & Answers

Do you have any questions about this product?
Let our experts and customers resolve all your doubts