24-Port 100/1000 Managed SFP Switch Plus 4 10GbE SFP+ Ports

The 24 port Managed Fiber switch has the capability of Fast Ethernet, Gigabit Ethernet and 10 Gig Ethernet in one unit for solutions to most all fiber environments.


What's special about this Managed Fiber Switch?

  • Modular capability on 24 ports for Gig or Fast Ethernet SFP inserts.
  • Inserts can be Single mode, or multimode, and can even communicate over a single fiber with use of WDM SFP inserts.
  • 4 ports support 10 Gig Ethernet
  • SNMP managed switch for features like Link Aggregation for “Big Pipe” connections to servers.
  • Enhanced Layer 2+ features
  • Can be powered by either standard AC line power or DC power from Uninterruptable Power Supplies, or both, simultaneously.
  • Click for More Features
  • CE UL Classified FCC TAA Compilant

The Signamax Managed Layer 2+ SFP Ethernet Switch 24 port provides non-blocking performance for 24 100/1000Base SFP port connections, 4 of which are shared as Dual Media 10/100/1000BaseT/TX ports, plus 4-1000Base/10GB SFP+ only ports, for a total of 28 ports. The 24 SFP slots use auto-detected SFP modules for fiber optic switch interconnection at extended distances. Both ring and star Gigabit backbone network architectures are possible with full automatic failover.

SX-065-7890FSFPDP Signamax 28 port Managed Fiber switch has the capability of Fast Ethernet, Gigabit Ethernet & 10 Gig Ethernet in one unit for solutions to most fiber environments. 28 6.8 lb 17.4" W x 8.1" D x 1.73" H
  • Dual speed SFP+ ports for 10 Gigabit Ethernet or Gigabit Ethernet fiber connectivity.
  • Dual speed SFP ports for fast Ethernet or Gigabit Ethernet fiber connectivity.
  • Bandwidth rate control via port-policer
  • IEEE 802.3az Energy Efficient Ethernet standard supported.
  • IPv6 and s-Flow support
  • Dual power capability supports simultaneous AC/DC switch powering.
  • IEEE 802.1AB Link Layer Discovery Protocol and Media Endpoint Discovery standard supported.
  • Supports RSTP/MSTP/STP for Ethernet redundancy
  • Supports port-based VLAN and IEEE 802.1Q VLAN Tagging and GVRP
  • IP multicast filtering through IGMP snooping V1, V2 & V3
  • Part # SX-065-7890FSFPDP
    Applicable Standards IEEE 802.3 10BaseT
    IEEE 802.3u 100BaseTX
    IEEE 802.3ab 1000BaseT
    IEEE 802.3z 1000BaseSX/LX
    IEEE 802.3ae 10GbE over fiber
    IEEE 802.1p Priority (Quality of Service [QoS])
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1D Spanning Tree Protocol compatible
    IEEE 802.1Q Tagged VLAN with GVRP
    IEEE 802.3x Flow Control
    IEEE 802.1x Access Control
    IEEE 802.3ad LACP
    VLAN Capabilities Port-based VLAN
    IEEE 802.1Q Tag-based VLAN; up to 4,096 active VLANs possible
    Q-in-Q VLAN supported, to efficiently enable Subscriber Aggregation
    Private VLAN Edge; Voice VLAN
    QoS Capabilities Supports Layer 4 TCP/UDP port and ToS classification
    Supports 802.1p QoS with eight hardware queues
    Supports Strict Priority and Weighted Round Robin (WRR)
    Supports priority in a Q-in-Q tag for Bandwidth Control
    Classification: •Port based •802.1p VLAN priority based •IPv4/IPv6 precedence / DSCP based •Differentiated Services (DiffServ) •Classification and re-marking ACLs Supports bandwidth rating per port •Ingress policer •Egress shaping and rate control
    Management Access Methods: Console port access via RS-232C/RJ-45 local console serial port (cable included with switch), SSH/SSL, Telnet, SNMP, or HTTP.
    Software Upgrade Capability: Via HTTP, TFTP in-band, Console out-of-band
    SNMP v1, v2c, and v3 Network Management
    RFC 1213 MIB (MIB-II)
    RFC 1757 RMON MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ethernet MIB
    Enterprise MIB
    Other Management: • HTTP/HTTPs; SSH • DHCP Client/ DHCPv6 Client • Cable Diagnostics • Ping • Syslog • Telnet Client • IPv6 Management
    Certifications CE
    EMI: FCC, EN 55022 (CISPR 22 Class A), EN 61000-3
    EMS: EN 61000-4-2/3/4/5/6/8/11, EN 55024
    Network Security Secure Socket Layer / Secure Shell (SSL/SSH)
    IEEE 802.1x access control with RADIUS and TACACS+
    Management Access Policy Control (ACL): Supports up to 512 entries. Drop or rate limitation based on: • Source and destination MAC, VLAN ID or IP address, protocol, port, • Differentiated services code point (DSCP) / IP precedence • TCP/ UDP source and destination ports • 802.1p priority • Ethernet type • Internet Control Message Protocol (ICMP) packets • TCP flag
    Ports 24 – 100/1000Base SFP ports with 4 Dual Media ports supporting RJ-45 10/100/1000BaseT/TX ports, plus
    4 – 1000Base/10GbE ports with SFP+ only ports
    Multicast/Broadcast/Unknown-Unicast Storm suppression enabled.
    LED Status Indicators Per Switch: Power
    Per Port: Copper: Status (Link/Activity),10/100/1000M; SFP Port: Status (Link/Activity/SPD), 100/1000M; SFP+ Port: Status (Link/Activity/SPD), 1000M/10GbE
    Latency <4.5 µs (LIFO)
    Throughput 95.232 Mpps
    Switch Fabric Speed 128 Gbps (non-blocking, wire speed performance)
    MAC Address Capacity 32K
    Jumbo Frame Support up to 10056 bytes frame size
    Port Mirroring Inbound and Outbound, assignable to any port
    Internetworking Protocols Supported
    Link Layer Discovery Protocol and Media Endpoint Discovery IEEE 802.1AB
    Link Aggregation Control Protocol Trunking IEEE 802.3ad, 26 trunking groups, up to 4 ports for each group.
    GARP VLAN Registration Protocol / Generic Attribute Registration Protocol IEEE 802.1Q with GVRP/ GARP
    Multicasting Supports IP Multicast Filtering via IGMP Snooping V1, V2, V3
    Spanning Tree Protocol / Rapid Spanning Tree /Multiple Spanning Tree Protocol IEEE 802.1d/1w/1s
    Static Routing IPv4 and IPv6 Unicast Static Routing
    Physical Characteristics
    Width 17.4" [13.6cm]
    Depth 8.1" [7.4cm]
    Height 1.73" [2.5cm]
    Weight 6.8 lb [3.1kg]
    Housing Metal case.19 in rack mounting hardware included.
    Operating Temperature 32° to 104° F [0° to 40° C]
    Operating Humidity 10 to 90%, non-condensing
    Storage Temperature -4° to 158° F [-20° to 70° C]
    Electrical Characteristics
    AC Input Range 100 – 240 V AC, 50/60 Hz internal universal power supply
    DC Input 24 – 72 V DC
    Warranty 5 years, including power supply


    Related Articles


    How-To Corner


    Request A Quote

    Did you know that we can give you a quote for most of our products, including shipping?

    You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)

    Questions & Answers

    Do you have any questions about this product?
    Let our experts and customers resolve all your doubts