Southwire® ShockSheild GFCI & ELCI User In-Line Attachable & Plugs Power

Easily Add Protection To Your Existing Electrical Connection


What's special about these GFCI and ELCI Southwire® adapters?

  • Provides GFCI and ELCI protection to existing plugs helping to reduce the chanceof injury or death from electrical accidents
  • Easy installation to existing cables or outlets for a fast set up and little to no downtime
  • Complies with NEC building codes for temporary installations
  • Click for More Features
  • National Electro Code

GFCI & ELCI protection has played a major part in reducing the number of victims of electrical accidents, while at the same time protecting expensive equipment. The ShockShield GFCI and ShockShield ELCI protective add-ons are particularly easy to integrate with existing electrical cable runs; depending on your personal preference or the amount of room available at the receptacle, you can either remove the male connector, or insert an In-Line protector. Having these cost effective protective add-ons can help you avoid costly mistakes and protect your personnel.

Southwire® RIGHT ANGLE User Attachable Plug
Part # Gfci / Elci Voltage Reset Gauge Weight Price
14880002-6 GFCI 120V/15A Manual N/A 0.33 lb
35190-001 GFCI 120V/15A Auto N/A 0.33 lb
Southwire® IN-LINE User Attachables
Part # Gfci / Elci Voltage Reset Gauge Weight Price
25230001-6 GFCI 120V/20A Manual 12-18 AWG 0.38 lb
25040101-3 ELCI 120V/20A & 240V/16A Manual N/A 0.38 lb
26140010-6 ELCI 120V/20A & 240V/16A Manual N/A 0.38 lb
  • Power is pointed out either by switch or lighted indicator
  • Trip response time is less than 25mS (milliseconds)
  • Made to last, 3000 operations minimum
  • Operating temperature ranges from –35º C to 66º C (-31º F to 150.8º F)

  • TRC-14880, TRC-54880 & TRC-24230 drawing (PDF) PDF
  • TRC-25000 & TRC-25230 drawing (PDF) PDF
  • TRC-25040 & TRC-26140 drawing (PDF) PDF
  • TRC-30040 & TRC-30050 drawing (PDF) PDF
  • TRC-35190 drawing (PDF) PDF
  • TRC-35200 drawing (PDF) PDF
  • NEMA Plug and Receptacle Configurations (PDF) PDF

    Part Number Volts/Amps Wire Size/Type Plug Type Trip Level GFCI/ELCI
    14880002-6 120V/15A 12-18 AWG NEMA 5-15 P 4-6 mA GFCI
    35190-001 120V/15A 12-18 AWG NEMA 5-15 P 4-6 mA GFCI
    25230001-6 120/20A 12-18 AWG N/A 4-6 mA GFCI
    26140010-6 120V/20A & 240V/20A 12-18 AWG N/A 30 mA ELCI
    30050003-3 240/20A 12-16 AWG N/A 4-6 mA GFCI
    25040101-3 120/20A & 240V/16A 12-18 AWG N/A 10 mA ELCI


    Related Articles


    How-To Corner




    Right Angle Plug: Simply remove your male connecting plug and replace it with the GFCI male connector.

    In-Line: Cut your existing cable about 9 inches or more away from the male plug and install the In-Line to both ends.


    GFCI Vs. ELCI?

    For the non-familiar with this terminology, this can be a hard subject to tackle. GFCI or Ground Fault Circuit Interrupters are inexpensive devices designed to prevent electrical accidents such as shock, unwanted fires, and even death. GFCI is designed to monitor all electricity flowing in a circuit, if the flow should be compromised in any way, the GFCI would immediately shut off the power before any electrocution can occur. GFCI is commonly used for the protection of personnel utilizing or working around electricity. A not so common form of protection is ELCI or Equipment Leakage Current Interrupters. ELCI is mostly used for electrical equipment protection and can provide protection for two, three or four wire circuits. It is largely available in 120V and 240V with load circuits up to 50A. Either of the type of devices will help you with protection in the workplace by saving you a lot of money and/or headaches.

    Request A Quote

    Did you know that we can give you a quote for most of our products, including shipping?

    You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)

    Questions & Answers

    Do you have any questions about this product?
    Let our experts and customers resolve all your doubts