Teflon® Expandable Heat & Chemical Resistant Braided Sleeving
Protects Cable Bundles and Hose Assemblies from Fire and Corrosive Elements
What's special about this flame retardant sleeving?
- 16 mil Teflon sleeving provides supreme heat, chemical and abrasion protection for your cables, hoses and bundles.
- Expands up to 150% to go over large or odd-shaped connectors, while still creating a snug fit on your cable assembly.
- Suitable for plenum environments, which makes it perfect for aviation, military, and industrial construction applications.
- Click for More Features
-
Teflon expandable braided sleeving is made to defend your cables and hoses against the most brutal conditions of industrial, military, and aviation applications, and also add a streamlined look to your wire assemblies.
Splicing may occur during the production of this sleeving. Two or three lengths may create a full spool.
Continuous lengths are available in most sizes at an additional 10% surcharge. Please specify if you require continuous lengths.
| MINISPOOLS | ||||||
|---|---|---|---|---|---|---|
| Part # | Nominal Size | Min. Diameter | Max. Diameter | Spool Length | Color | Price / Spool |
| MSTF0125 | 1/8" | 3/32" | 1/4" | 225' | Clear | Manufacturer Direct
|
| MSTF025 | 1/4" | 1/8" | 7/16" | 200' | Clear | Manufacturer Direct
|
| MSTF0375 | 3/8" | 3/16" | 5/8" | 125' | Clear | Manufacturer Direct
|
| MSTF050 | 1/2" | 1/4" | 3/4" | 100' | Clear | Manufacturer Direct
|
| MSTF075 | 3/4" | 1/2" | 1-1/4" | 75' | Clear | Manufacturer Direct
|
| MSTF125 | 1-1/4" | 3/4" | 1-3/4" | 50' | Clear | Manufacturer Direct
|
Splicing may occur during the production of this sleeving. Two or three lengths may create a full spool.
Continuous lengths are available in most sizes at an additional 10% surcharge. Please specify if you require continuous lengths.
| BULK SPOOLS | ||||||
|---|---|---|---|---|---|---|
| Part # | Nominal Size | Min. Diameter | Max. Diameter | Spool Length | Color | Price / Spool |
| BSTF0125 | 1/8" | 3/32" | 1/4" | 1000' | Clear | Manufacturer Direct
|
| BSTF025 | 1/4" | 1/8" | 7/16" | 1000' | Clear | Manufacturer Direct
|
| BSTF0375 | 3/8" | 3/16" | 5/8" | 500' | Clear | Manufacturer Direct
|
| BSTF050 | 1/2" | 1/4" | 3/4" | 500' | Clear | Manufacturer Direct
|
| BSTF075 | 3/4" | 1/2" | 1-1/4" | 250' | Clear | Manufacturer Direct
|
| BSTF125 | 1-1/4" | 3/4" | 1-3/4" | 200' | Clear | Manufacturer Direct
|
Monofilament Thickness: 0.016"
| Nominal Size # | Min. Diameter | Max. Diameter | OD | ID | Ends | Carriers |
| 1/8" | 3/32" | 1/4" | 0.205" | 0.125" | 1 | 24 |
| 1/4" | 3/16" | 3/8" | 0.33" | 0.25" | 1 | 32 |
| 3/8" | 1/4" | 3/4" | 0.445" | 0.375" | 3 | 32 |
| 1/2" | 3/8" | 7/8" | 0.58" | 0.50" | 3 | 40 |
| 3/4" | 5/8" | 1-1/4" | 0.83" | 0.75" | 3 | 48 |
| 1-1/4" | 1-1/8" | 1-1/2" | 1.33" | 1.25" | 3 | 72 |
| Physical Properties | |
|---|---|
| Material | Teflon® perfluoroalkoxy (PFA) |
| Monofilament Thickness (ASTM D-204) | 0.016" |
| Flammability Rating | FAR 25 |
| Recommended Cutting | Hot Knife |
| Wall Thickness | 0.04" |
| Tensile Strength - (ASTM D-2265) | 2.1 Yarn lbs. |
| Specific Gravity | 2.15 |
| Moisture Absorption (ASTM D-570) | < 0.01% |
| Abrasion Testing | |
| Abrasion Resistance | Very High |
| Abrasion Test Machine | Taber 5150 |
| Room Temperature | 71°F |
| Humidity | 59% |
| Slight Rough Surface and a Few Filaments Broken | 1,500 Test Cycles |
| Visible Wear And Three Filaments Broken |
2,000 Test Cycles |
| Material Destroyed | 3,000 Test Cycles |
| Pre-Test Weight | 13,955.5 mg |
| Post-Test Weight | 12,911.9 mg |
| Test End Loss Of Mass Point Of Destruction |
1,043.6 mg |
| Hard Vacuum Data (ASTM E-595 at 10-5 torr) | |
| TML | 0 |
| CVCM | 0 |
| WVR | 0 |
| Outgassing | Very Low |
| Oxygen Index (ASTM D-2863) | > 95 |
| Operating Temperatures | |
| Minimum Continuous | -94°F (-70°C) |
| Maximum Continuous (MIL-I-23053) | 550°F (280°C) |
| Melt (ASTM D-2117) | 590°F (310°C) |
Chemical Resistance
| Aromatic Solvents | No Effect |
|---|---|
| Aliphatic Solvents | No Effect |
| Chlorinated Solvents | No Effect |
| Weak Bases | No Effect |
| Salts | No Effect |
| Strong Bases | No Effect |
| Salt Water (O-S-1926) | No Effect |
| Hydraulic Fluid (MIL-H-5606) | No Effect |
| Lube Oil (MIL-L-7808) | No Effect |
| De-Ice Fluid (MIL-A-8243) | No Effect |
| Strong Acids | No Effect |
| Strong Oxidants | No Effect |
| Esters Keytones | Little Effect |
| UV Light | No Effect |
| Petroleum | No Effect |
| Fungus (ASTM G-21*) | No Effect |
| * MIL-1-744, MIL-STD 810/508, MIL-E-5272, MIL-1-1631 |
|
Related Articles
How-To Corner
Request A Quote
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)
Questions & Answers
Hello, is MSTF025 in stock?
- Yes this is a stocked item
Do you have any questions about this product?
Let our experts and customers resolve all your doubts