Product Videos

product video - rUSlaNUO_Pw

Duraflex® Abrasion Resistant Cable Sleeve

High Strength Abrasion Protection


What's special about Duraflex?

  • Prevents damage from UV, gasoline, engine chemicals and salt
  • Resists cuts, abrasion and penetration
  • No damage after 100,000 abrasion cycles
  • 0.09" wall thickness resists snagging
  • Flexible and economical general purpose protection
  • Deflects high pressure hose ruptures
  • Operating Temp. -40° F to 500° F
  • Click for More Features
  • RoHS Compliant CSA Approved UL Recognized Component Mark Passes UL VW-1 Flame Test

Duraflex® is our solution to the challenge of constant, repetitive and extreme abrasion. The flexible sleeve is tightly woven from military grade Nylon/cotton hybrid yarns and is impregnated with Kevlar polymers to increase abrasion and flame resistance. Duraflex® provides up to 50 times greater abrasion and heat resistance than untreated Nylon sleeves.

Splice Free Spooling:
Some splices are normal during the braiding process. Usually, not more than one or two splices will be on any given spool. Ordering splice-free spools guarantees the maximum continuous yield on your spools. This option is suggested when ordering large lengths of sleeving or for important and precise projects. This treatment is most applicable in lengths that exceed 100 feet. In general, shorter lengths will be splice free as they come off the spools.

0.71" Diameter
Color Part # Length Price
DFN0.71-50ft 50'
DFN0.71-100ft 100'
0.83" Diameter
Color Part # Length Price
DFN0.83-50ft 50'
DFN0.83-100ft 100'
0.92" Diameter
Color Part # Length Price
DFN0.92-50ft 50'
DFN0.92-100ft 100'
1" Diameter
Color Part # Length Price
DFN1.00-50ft 50'
DFN1.00-100ft 100'
1 1/8" Diameter
Color Part # Length Price
DFN1.13-50ft 50'
DFN1.13-100ft 100'
1 1/4" Diameter
Color Part # Length Price
DFN1.25-50ft 50'
DFN1.25-100ft 100'
1.34" Diameter
Color Part # Length Price
DFN1.34-50ft 50'
DFN1.34-100ft 100'
1.59" Diameter
Color Part # Length Price
DFN1.59-50ft 50'
DFN1.59-100ft 100'
1.75" Diameter
Color Part # Length Price
DFN1.75-50ft 50'
DFN1.75-100ft 100'
2.07" Diameter
Color Part # Length Price
DFN2.07-50ft 50'
DFN2.07-100ft 100'
2.38" Diameter
Color Part # Length Price
DFN2.38-50ft 50'
DFN2.38-100ft 100'
2.54" Diameter
Color Part # Length Price
DFN2.54-50ft 50'
DFN2.54-100ft 100'
2.86" Diameter
Color Part # Length Price
DFN2.86-50ft 50'
DFN2.86-100ft 100'
3.34" Diameter
Color Part # Length Price
DFN3.34-25ft 25'
DFN3.34-50ft 50'
3.66" Diameter
Color Part # Length Price
DFN3.66-25ft 25'
DFN3.66-50ft 50'

Duraflex® is extremely flexible and easy to install over single or multiple hoses. In the event of a high-pressure hose blowout, Duraflex® helps prevent high pressure fluid from becoming a danger to equipment operators and other personnel.

Duraflex® is used on wires to bundle and protect them, on hoses and cables to prevent expensive and time consuming abrasion damage and on chains and cables to prevent them from marring or ruining expensive finished surfaces.

Duraflex® has been tested for and received the U.S. Department of Labor's Mine Safety Health Administration (MSHA) flame test approval.

  • MSHA Approved
  • Operating Temp. -40° F to 500° F
  • Compliant with European Union's Restrictions on the use of Hazardous Substances (RoHS) Directive.
  • Measurement Conversion Chart


Abrasion Properties
Abrasion Resistance High
Abrasion Test Machine Taber 5150
Abrasion Test Wheel Calibrase H-18
Abrasion Test Load 500g
Room Temperature 80° F
Humidity 70%
Material Destroyed 3,500 Test Cycles
Pre-Test Weight 7,191.6 mg
Post-Test Weight 6,680.7 mg
Test End Loss of Mass Point of Destruction 510.9 mg
Chemical Resistance
Aromatic Solvents 1
Aliphatic Solvents 1
Chlorinated Solvents 1
Weak Bases 1
Salts 1
Strong Bases 2
Salt Water O-S-1926 1
Hydraulic Fluid (MIL-H-5606) 1
Lube Oil (MIL-L-7808) 1
De-Icing Fluid (MIL-A-8243) 1
Strong Acids 5
Strong Oxidants 5
Esters/Keystones 1
UV Light 2
Petroleum 3
Fungus (ASTM-G-21) 2
Halogen Free Yes
RoHS Yes
1=No Effect  2=Little Effect  3=Affected  4=More Affected  5=Severely Affected
Physical Properties
Monofilament Diameter (ASTM-D-204) N/A
Recommended Cutting Scissor
Colors 1
Wall Thickness .045
Specific Gravity (ASTM-D-792) 1.14
Moisture Absorption (ASTM D-570) 2.7
Hard Vacuum Data (ASTM E-595 at 10-5 torr) TML - 1.10
CVCM - .01
WVR - .69
Outgassing High
Oxygen Index (ASTM-D-2863) 22
Related Articles


How-To Corner


Request A Quote

Did you know that we can give you a quote for most of our products, including shipping?

You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)

Questions & Answers


Hello, this regarding Professional Dura Wrap. The nominal size is when the wrapping is closed? What I mean is that if I have a harness that is 1.5 inches in diameter, the 1.59 "will fit properly or be tight, do I have to select a larger size?

Asked by Anonymous user on 05.53 PM Wednesday, 23 August, 2017

  • - Hello, Yes the normal size of the item is when it is closed. The normal size is the inside diameter.

    andrew b. on 03.26 PM Tuesday, 29 August, 2017

Do you have any questions about this product?
Let our experts and customers resolve all your doubts