Home Cable Management Wire Duct
Wire duct easily allows for
organization, pulling and separation of cables . Terminated wires to be re-routed easily through the snap-off "fingers", which are wide with rounded edges to protect wires and hands from cuts. It can either be drilled into or affixed to the wall with adhesive for a professional look in your home and office, and it is made of high impact, self extinguishing rigid PVC plastic with a high heat deflection for minimal distortion at high temperatures
Economical Open Slot Wiring Duct
Made of heat-resistant PVC (up to 85°C). Two meter (6.6 ft) length fits most computer cabinets. Covers included on all orders.
Open Slot Wiring Duct
These Open-Slot ducts are manufactured with wide fingers to give additional cable support and allow terminated wires to be re-routed easily and come with covers.
Panduit® PanelMax™ DIN Rail Wiring Duct Combo
for a 6ft piece
Designed to save money and maximize space in enclosure and backboard cabling applications, and allows easy access to terminal blocks for installation and maintenance.
Leviton Versi-Duct® Cable Management System
Designed to ease cable transitions between patch panels and horizontal wire managers or adjacent enclosures, this cable duct system has cable-retention fingers that align with rack spaces.
Richco® Richflex Flexible Channel
Perfect for use under desks, to and from control panels or in any other awkward space needing cable management. Features bendable fingers that allow cable break-outs wherever they're needed.
Panduct® Type H - Hinged Cover Wide Slot Wiring Duct
for case of 20 ducts
Ideal for environments where frequent modifications are made. The dual hinge design allows you to quickly and easily access cables or wires in control panels and communication closets.
Panduct® PanelMax™ Shielded Wiring Duct
for 2 ducts
Helps keep the electronic environment clean for unfettered network performance. Add Panelmax Noise Shield to keep performance high when installing multiple runs within the same duct.
Narrow Slot Wiring Duct
Ideal for use with slimmer terminal blocks where more access is required. Improves appearance of panels with cables out in best position. Comes in 20 sizes in a choice of gray, white or black.
Panduct® Type HN Narrow Slot Hinged Cover Wiring Duct
for case of 20 ducts
Great for environments where cable management of high density cabling is a concern. The frequent slots and breakout points paired with the hinged cover provide cable access without hassle.
Panduct® Type-F Narrow Slot Wire Duct
for case of 20 ducts
Equipped with a narrow finger/slot design, this wire duct enhances cable organization by providing more fan-out areas for wires and cables, and protects your hands with rounded edges.
Closed Slot Wiring Duct
Excellent cable retention and enhanced protection for installers. Comes in 20 sizes in a choice of gray, white or black. UL, CSA and Lloyds Reg. approved.
Noryl Wiring Duct
Choice of Open slot, Closed slot or Solid wall with 0.75" slot pitch, 0.31" slot width, Zero Halogen, and Low smoke, in a wide range of sizes.
Economical Solid Wall Wire Duct
Ideal for disguising your cables while protecting them from debris and dust, this solid wire duct can be run along the wall like raceway, or installed inside a server enclosure.
Solid Wall Wiring Duct
Ideal where no break-outs are required or side wall access is infrequent. Complete cable protection. 25 sizes, in either gray, white or black. UL, CSA and Lloyds Register approved
Economical Wire Duct Accessories
Designed for use with solid or open slot wire duct, these 90° turns, end caps, inside and outside corners, joint covers and T-connectors give you a neat custom installation.
Panduit® PanelMax™ EMI Noise Shield
Ideal for use inside or mounted directly onto any surface that wires are routed over. Perfect for reducing crosstalk between cables without the investment in expensive shielded cable.
Metal DIN Rails
Perfect for installing wire duct, circuit breakers and other components without the need to use bulky housings. Long enough for larger applications, and can be cut to size for smaller projects.
Wire Duct Mounting Rivets and Rivet Tools
Perfect for fastening wire duct to surfaces without the need to juggle drills, screws and screwdrivers, these rivets and rivet tools let you pre-drill holes, and then easily pop in rivets later.
Surface Raceway and Wire Duct Cutter
Ideal for use with PVC-based wire duct, cord covers and raceway, this ergonomic cutter lets you comfortably trim product to length using less force than traditional cutters, and eliminates hand saws.
Panduit® Wire Duct Cutting Tool
Designed for use with plastic raceway, wire duct and channel covers. Trims PVC cable management product to size without the need for excessive force, and leaves cut edges smooth and burr-free.
What can make this page better?
We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we're missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!