Arlington Industries - Low Voltage Brackets, Faceplates, Electrical Boxes
FSR404 4x4 Box
Available in steel or plastic, these dual-gang wall boxes adapt to different wall thicknesses, and let you install electrical outlets or low voltage connections in any retrofit application.
Electrical Box Extenders
The purpose of the Arlington Electrical Box Extender is to allow you to pull out your electrical box so that it lays flush with the newly installed wall covering without having to remove or repositioning the existing box. Talk about a way to save yourself some valuable time and money.
Gangable Plastic Electrical Boxes
Available in styles to fit new construction or retrofit jobs, these plastic electrical boxes give you the option of ganging up to 10 devices or receptacles without tools, and take up very little storage space, allowing you to easily keep parts on hand without having to order for each individual job.
Non-Metallic Enclosure Boxes
Ideal for protecting low voltage devices from debris and tampering in indoor environments, these non-metallic wallmount enclosures resist corrosion and heat, and are available with your choice of optional padlock hasp or cam lock for extra security.
Steel ONE-BOX™ Fixture Box
Perfect for both residential and commercial use, this fixture box attaches onto the side of existing joists and beams to accommodate the installation of ceiling fans and hanging lights without the need for new structural supports.
Recessed Low Voltage Mounting Brackets
Designed for use with wall mount devices, these recessed mounts can be personalized with any low voltage connections, so your electronics can plug in but still sit flush on the wall.
Single and Dual Gang Recessed Electrical Boxes
These electrical boxes are recessed, or pushed, into the wall creating a few extra inches of precious space anywhere you install them. Additionally, you can use these devices to make it possible to wall-mount a computer or small TV.
Recessed Multiple Gang TV Box for Power and Low Voltage
Hide or conceal outlets and multiple cables behind your TV with this recessed gang TV box. Ideal for neatly installing audio, telephone, home theater, networking and auxiliary cables.
In Box™ Retrofit Electrical Box
The InBox™ comes packaged with the electrical box with a weatherproof-in-use cover, installed bug plugs, (1) standard duplex and (1) GFCI face plate, installation screws, (1) roll of caulk and NM cable connector. In addition to being used with standard flat surfaces, you can use the profile adapters sold separately to accommodate different lap sizes.
13" wide Recessed Double-Gang TV Box
If you are tired of having your electronics jut out from the walls because of the outlet boxes behind them, this is the product for you. Arlington's Recessed TV Box provides you with an in wall solution. LCD/ Plasma TV's will sit flush against the wall as will your furniture giving you extra space and a neat finish.
SCOOP Cable Entry Plate with Slotted Cover
Designed to provide support and a professional, finished appearance for in-wall cable entry points, this cable plate’s slotted cover prevents low voltage cables from falling back behind the wall, and fills in open space for a cleaner-looking installation.
Nail-On Low Voltage Mounting Bracket - New Construction
Nail-in mounting brackets are a great addition for a fast, painless set up. Available in single and double gang, these bracket mounts are sure to make your low voltage installation an easy one.
Screw-In Low Voltage Mounting Bracket - New Construction
Single and 2-gang brackets for the installation of LOW VOLTAGE Class 2 ONLY. Installs in 50% less time than steel or plastic mud rings.
Horizontal Low Voltage Mounting Bracket - New Construction
This versatile mounting bracket allows you to not only install it vertical or horizontal but also gives you the possibility to use 3/4" or 1" EMT. This smart purchase for your new construction will help you to extend your mounting possibilities.
New Construction Low Voltage Mounting Brackets
These Low Voltage Mounting Brackets are a great addition to your new construction project. The allow you to run communication connections throughout your beams without the need for an electrical box.
New Construction Power & Low Voltage Combo Box
Speeding up the installation process is possibly one of the top priorities when it comes to construction projects. Having a Power and Low Voltage combo box can help you save time and money along with making your connections a lot more accessible for the everyday use.
Small Diameter Sconce Box
These small diameter sconce electrical boxes are excellent choices when you want the professionally installed look. Not only are they aesthetically pleasing, but they are functional as well. The new construction boxes (FSC3212 & FSC2312S) are strong and can hold lights that weigh up to 5 lbs.
Low Voltage Mounting Brackets 1, 2, 3, 4 Gang - Existing Construction
This low cost, non-metallic option is made of a non-conductive plastic material that won't damage your cables during installation. Each bracket is CAT5 listed and is great for retrofit installations of communications, cable TV, or computer wiring. They also eliminate the need for an additional template as they act as their own template for drywall cutting.
Power & Low Voltage Combo Box - Existing Construction
This great combo box allows you install power and low voltage all in one for an existing construction situation.
Reversible Entrance Plates
These wallplates give you a way to feed low voltage cables into a wall without them becoming damaged, and can also be reversed for use as an exit point.
Power and Cable/Phone Duplex Cover
Available with RJ11 or RJ45 connections, these provide a finished appearance for power/low voltage combo boxes in existing buildings and new constructions.
Dri-Box® Weatherproof Outlet Covers
These Dri-Box Adapters® are easy to install and maintain. The cover snaps right into place and provides a weatherproof fit protecting your valuable electrical components.
Snap2It™ Connectors with Insulated Throat
Arlington's Snap2It 3810AST and 4010AST connectors have been redesigned and improved to give you the widest range of cable O.D. as well as cable selection.
Arlington® AnyBODY™ Universal Conduit Bodies
Ideal for use with both metallic and non-metallic conduit, these connectors let you easily customize angles in the field so that you can eliminate the need for conduit benders, and save time and space that would be wasted on ordering and storing single-configuration parts.
The Loop - Cable Hanger
The Loop from Arlington Industries works as a hanger for communication cable support. Cable scan be hung at virtually any angle, whether perpendicular or parallel, even from beams by using a standard beam clamp. With The Loop, you can hold a maximum bundle diameter of 5" in the largest loop, or up to 300 CAT5 cables.
Steel and Iron Beam Clamps
Designed to attach cable support systems to beams and purlins without soldering or drilling, these steel and iron clamps can support up to 600 lbs.
Insulated EMT Bushings
Designed to cover the rough edges of EMT conduit to prevent cable damage, these tap-on bushings are safe for use in air handling spaces, and are compatible with rigid metal and PVC conduits.
Ideal for supporting cable trays, light fixtures and other static loads weighing up to 100 pounds, these unique connectors make contact with drop wires at 6 points, so fixtures can be safely suspended vertically or at an angle.
Snap2It® Conduit Fittings
Ideal for use with both metallic and non-metallic conduits, these fittings simply snap on to create a liquid-tight seal without the need for extra hardware, tools, tapes or messy sealants.
DR Series Drive Rings
From $0.38 / 25pk
Designed to securely route cables on walls, wood framing and utility poles, these galvanized steel drive rings are corrosion-resistant in wet and dry environments, and feature open-ended loops for easy cable changes.
Black Button™ Non-Metallic Wire Connectors
From $0.24 / 25 per pack
Designed to protect the wires being fed into electrical boxes without the use of additional conduit, these wire connectors accommodate up to 2 cables, snap into place without tools, and remove with nothing more than a flat head screwdriver.
Arlington Industries Non-Metallic Wire Bushings
These Class 2 Wire bushing provide a smooth transition for your cables and keep your drywall safe from damage. Available in 4 common sizes to accommodate standard hole saws.
Rooftop Conduit Supports
Perfect for raising and supporting conduit 4 inches or larger above roof surfaces per NEC requirements, these rooftop supports require no drilling, are made of UV-rated plastic for long-term use in any climate, and can support up to 2000 lbs.
Arlington® Non-Metallic Cord Grips
From $5.53 / 5 per pack
Provides UV and reliable outdoor environmental protection from moisture and heat for cables. Use to connect cables to raceways, junction boxes, combiners and conduit.
CableWay™ Cable Runway Support System
Price $13.10 5FT
Versatile cable tray support system is perfect for power or communications cabling, ideal for both new construction as well as remodeling jobs.
Gard-N-Post Bollard Kit
Perfect for decks, docks, backyards and any other outdoor setting, these Pagoda-style bollard posts are designed to stylishly light gardens and pathways while bringing power and low voltage connections conveniently outdoors.
Ideal for use with light fixtures, security cameras, detectors and signage, these mounting boxes install easily into almost any wall or ceiling to support the weight of hanging or suspended fixtures, and eliminate the need for additional mounting brackets.
Designed specifically for dome-type security cameras up to 5" in size, this mounting kit saves time and money on retrofits by enabling you to mount a camera to any existing fixture box with minimal effort.