Home Braided Sleeving Abrasion Resistant Sleeving The Gator Sleeve Side Entry Sleeving
The Gator Sleeve Side Entry Braided Sleeving
Easy To Install and Affordable Abrasion Resistance For Delicate Cables, Wires and Hoses
Close Window
The Gator Sleeve Side Entry Braided Sleeving
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
|
Leaving delicate cables and hoses exposed to the outside elements puts them at risk for costly abrasive damage and UV degradation. Adding Gator Sleeve Braided Sleeving to cables and hoses in high-traffic or high-friction areas will help extend their life and save you money down the road. Unlike traditional braided sleeving or wire loom, the Gator Sleeve installs easily with no special tools or endless sliding. |
- Self-wrapping oversleeve keeps wires and cables neatly bundled, and requires no additional cable ties as long as you maintain a minimum 25% overlap
- Affordable alternative to similar braided sleeving products with the texture and feel of a higher-end side entry sleeving
- Excellent memory retention; the gator sleeve will go back to its original form after installation, for a clean and professional look
- Extra thick material is great for covering chains and other rough materials, to protect delicate paints or finishes from being scratched or marred
- Wide temperature range (-40°C to 150°C) for use in unfavorable elements and harsh environments
- Cuts clean with any hot knife, and provides a professional quality finish when used in conjunction with heat shrink tubing
- UL94-V0 rated for code sensitive applications
| Physics | |
|---|---|
| PET filaments diameter | 0.20± 0.02mm |
| PET filaments Spec | 500± 10%D |
| Thickness | 1.03±0.15mm |
| Density | ASTM D-792 1.38 |
| Melting | ASTM D-2117 230°C |
| Operating Temp. (Maximum Continuous) | 150°C |
| Operating Temp. (Minimum Continuous) | -70°C |
| Chemosurgery | |
| 1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected | |
| Aromatic Solvents | 2 |
| Aliphatic Solvents | 1 |
| Chlorinated Solvents | 3 |
| Weak Bases | 1 |
| Salts | 1 |
| Strong Bases | 2 |
| Salt Water 0-S-1926 | 1 |
| Hydraulic Fluid MIL-H-5606 | 1 |
| Lube Oil MIL-L-7808 | 1 |
| De-Icing Fluid MIL-A-8243 | 1 |
| Strong Acids | 3 |
| Strong Oxidants | 2 |
| Esters/Keystones | 1 |
| UV Light | 1 |
| Petroleum | 1 |
| Fungus ASTM D-2863 | 1 |
| Oxygen Index ASTM D-2863 | 21 |
| Halogen Free | Yes |
| Abrasion Resistance | |
| Abrasion Resistance ASTM D-4157 | Very High |
| Abrasion Test Load | 2000g |
| Room Temperature | 25°C |
| Humidity | 70% |
| Material Destroyed | 250000 Test Cycles |
| Flammability | |
| Moisture Absorption | 0.08% ASTM D-570 |
| Smoke D-Max | 56 ASTM E-662 |
| Toxicity Index | 4.2 USN 713 |
| UL Listed: | UL94-V0 |
| PART # | SIZE | COVERAGE RANGE | LENGTH | PRICE / FOOT | PRICE |
| ED-BS-GTR-0125-1 | 1/8" | 3/64" - 1/4" | 1 - 49 feet | $0.86 | |
| 50 - 99 feet | $0.72 |
||||
| 100 - 249 feet | $0.63 |
||||
| 250+ feet | $0.57 |
||||
| ED-BS-GTR-025-1 | 1/4" | 1/4" - 3/8" | 1 - 49 feet | $1.39 | |
| 50 - 99 feet | $1.02 |
||||
| 100 - 249 feet | $0.92 |
||||
| 250+ feet | $0.83 |
||||
| ED-BS-GTR-0375-1 | 3/8" | 3/8" - 3/5" | 1 - 49 feet | $2.11 | |
| 50 - 99 feet | $1.55 |
||||
| 100 - 249 feet | $1.41 |
||||
| 250+ feet | $1.27 |
||||
| ED-BS-GTR-050-1 | 1/2" | 1/2" - 3/4" | 1 - 49 feet | $2.44 | |
| 50 - 99 feet | $1.79 |
||||
| 100 - 249 feet | $1.63 |
||||
| 250+ feet | $1.47 |
||||
| ED-BS-GTR-075-1 | 3/4" | 3/4" - 1" | 1 - 49 feet | $2.82 | |
| 50 - 99 feet | $2.18 |
||||
| 100 - 249 feet | $1.86 |
||||
| 250+ feet | $1.55 |
||||
| ED-BS-GTR-100-1 | 1" | 1" - 1-1/2" | 1 - 49 feet | $3.98 | |
| 50 - 99 feet | $3.08 |
||||
| 100 - 249 feet | $2.63 |
||||
| 250+ feet | $2.18 |
||||
RELATED ARTICLES -
- How to Terminate Braided Sleeving
- How to Determine Which Product Diameter You Need
- Tips for Protecting Cables from Traffic
- Heat Shrink Tubing: How It Was Invented, and Why We Use It
REVIEW SNAPSHOT®
by PowerReviewsGator Sleeve-Side Entry Braided Sleeving 0.125 Inch-Black
(based on 1 review)
Ratings Distribution
Reviewed by 1 customer
Displaying review 1
Pros
- Easy To Install
- Fits Multiple Cable Sizes
- GReat
- Great Fit
Cons
Best Uses
- Automotive
- Organization
- Protection
Comments about Gator Sleeve-Side Entry Braided Sleeving 0.125 Inch-Black:
The product sure does clean up a mess when it comes to wiring
- Primary use:
- Personal
Displaying review 1
Braided Sleeving Related Items
 PET Colored Expandable SleevingFrom $0.35 per foot PET BLACK Expandable Sleeving From $0.25 per foot Slips easily over wires, cables, hoses, springs, rods, and chains to protect against abrasion and provide a professional, customized finished look. |
 FireFlex Fire Resistant Fiberglass Cable SleevesFrom $111.00 / spool Silicone-coated fiberglass sleeving protects cables and hoses at continuous operating temps up to 500°F. Resists hydraulic fluids, oil, fuel and abrasion, and cuts easily with scissors. |
 Non-Fray Flame Retardant SleevingFrom $37.80 / spool When used to protect cables in industrial and other heavy-duty applications, this sleeving self-extinguishes and prevents flame spread to surrounding components. |
 Heavy Wall®From $51.99 per 100 ft Perfect for industrial and outdoor applications, Heavy Wall features a dense but lightweight braid that stands up to chemicals, UV rays, and extreme abrasion, and prevents fungus growth and rot. |
 F6 Braided Wrap-Around SleevingFrom $1.03 per foot Featuring a laterally-split design with a 25% overlap, F6® makes cable insertion easier than ever, and is able to withstand tight-radius bends without puckering or splitting open. |
 Reflex® Expandable SleevingFrom $15.95 Makes cables, air hoses and water lines highly reflective for better visibility and increased safety in low-light environments. Resists UV, salt, chlorine, engine fluids, and abrasion. |
 Fiberglass Expandable SleevingFrom $36.80 / spool This tightly braided and extremely flexible braided fiberglass sleeving resists engine fluids and solvents and protects hose lines and wiring from continuous temps of up to 240° C. |
 Bentley Harris® Roundit® 2000From $1.75 / foot With a self-wrapping design that's heat-treated to retain its shape, Roundit® 2000 slips over cables and hoses via its lateral slit to protect against damage-causing liquids and sharp edges. |
 Hand Held Hot KnifePrice $61.50 110 volt A.C., fast heating. This soldering gun doubles as an inexpensive braided sleevings cutting and sealing tool. |
 Bench Mount Hot KnifePrice $109.99 110 volt A.C., 165 watts, fast heating (up to 1200° F), lighted switch. Allows for fast cutting and sealing of braided sleevings all at the same time. Warms up in only 8 seconds. |
 2:1 Standard WallFrom $0.54 / foot Capable of shrinking down to half its original diameter, 2:1 protects wires in network, auto, and commercial applications, and is available with adhesive lining. |
 Electrical TapeFrom $1.99 Designed for use with up to 600V in temps of up to 176°F (80°C), this PVC tape is UL listed, has pressure-sensitive rubber adhesive, and comes in 6 colors. |
Facebook Comments