Cooper Bussmann Fuses  

FRS-R Fuses
From $15.29
The FRS-R fuses from Cooper Bussmann have a full range of amperages that allow you to select the load you need for maximum over current protection.

KTK Fuses
From $19.74
These fast acting, supplemental fuses which means they are your second line of defense and react quickly to over loads so you know your devices are safe.

T-Tron® JJN Series Fuses
From $21.85
The T-Tron® is a very fast acting fuse which is equipped with a silver element for high current limiting ability.

FNQ Tron® Time Delay Fuses
From $19.78
Excellent choice when protecting your motor control circuits, machine tool transformers and lighting. Low cost supplemental protection system for your costly equipment.

LP-CC LOW-PEAK Yellow Fuse
From $23.78
The LOW-PEAK LP-CC fuse can be used close to full load amp ratings for maximum overload and short-circuit protection. In addition, it may be used where either a time-delay or a fast-acting fuse is needed.

LPS-RK Fuses Class RK1, Dual-Element, Time-Delay Fuse
From $20.70
These fuses are current-limiting, dual-element, time-delay fuses which provide a ten second (minimum) at 500% rated amps (8 seconds for 0-30A sizes).

R600 Series Fuse Blocks
From $19.51
Fuse holders serve the primary function of providing a mount as well as protection for fuses. These holders make changing a fuse a snap. These fuse blocks are used in an assortment of applications such as consumer electronics, industrial, and many others.

J600 Series Fuse Blocks
From $26.95
These Cooper Bussmann fuse holders are made for use with the Low Peak LPJ - J class fuses which are specifically designed to provide excellent short-circuit protection and provide the protective casing for fuses as well as make replacements quick and easy.

KLU Limitron® Series Fuses
From $761.16
This fuse provides selective coordination, which means only the circuit nearest the open fuse is affected; the rest of your system remains functioning.

Low Peak Time Delay KRP-C Series Fuses
From $878.92
These fuses are made from quality, high grade materials which provide lower watts loss and operating temperatures with superior arc quenching during current-limiting action.