Cable Lubrication Supplies
Clear Lube, 1 Quart - Greenlee
Designed for use within electrical or datacom cable pulls. Clear and colorless for quick, easy clean-up. Excellent lubricity for fast pulls (.27-.29 COF).
Clear Lube Pulling Lubricant, 5 gallon - Greenlee
Excellent for use in electrical or datacom cable applications; Easy to use and clean up, clear and colorless; Safe for use anywhere, non-hazardous, non-toxic and non-corrosive; Well lubricated for fast pulls 9.27-.29 COF).
IDEAL Aqua-Gel® Cold Weather Cable Pulling Lubricant
Designed specifically for use in cold weather environments, this outdoor cable lubricant stays fluid all the way down to -25°F (-32°C), so it's able to maintain superior lubricity in temperatures that would freeze most other wire lubes.
Aqua-Gel® II Cable Pulling Lubricant
Formulated to remain semi-fluid even after drying, this polymer-based cable lubricant allows you to move cables later on without reapplying, and is completely non-corrosive, so it won't harm wiring, conduit, or the environment.
Ideal Industries Aqua-Gel® IIP Wire Pulling Lubricant
Formulated for low viscosity, this cable pulling lube can be easily poured or pumped on to eliminate messy hand application, and dries to a semi-fluid film, so that cables don't become stuck to one another or the conduit they're in.
Ideal Industries Yellow 77® Plus Wire Pulling Lubricant
Featuring a Teflon additive that allows it to lubricate better than other wax-based products, this cable pulling lubricant has a homogeneous formula that requires no mixing, and won’t harden, leaving cables easy to extract in the future.
Can be used with all cable insulation systems; Cream dries without hardening residue; Easy to use and clean up, no mess, no staining; Fast and easy pulling ability due to the light yellow cream.
American Polywater® CLR Clear Cable Lubricant
This cleanly-formulated clear cable lubricant reduces installation friction to extend the life of your electrical and datacom cables, and is biodegradable and nontoxic.
Polywater® SPY Cable Lubricant
Available in spray or wipe-on formulas, this water-based cable lubricant facilitates all types of cable-pulling jobs, and is non-toxic and environmentally-friendly.
American Polywater® CableFree® Cable Removal Aid
This liquid removal aid helps to loosen cables that are stuck to wax, rust, soap, dirt, bitumen and other contaminants that can accumulate inside conduit.
IDEAL ClearGlide™ Wire Pulling Lubricant
Ideal for use with color-coded cable runs, this clear gel wire lubricant won't stain, fade, or discolor cable jackets, and has a water-based formula that's both environmentally-friendly and easy to clean up.
Ideal Industries Velocity™ Cable Pulling Lubricant
Formulated to move cables up to 4" in diameter through the oldest, dirtiest, and most stubborn conduits, this high-lubricity wire pulling lube contains no wax, grease, or silicone, so it’s safe for use in any environment.