AmerTac™ Westek® Touch Control Dimmers

AME-A6043CS – Touch Pad Dimmer Cabinet Lighting System

1. Plug Accent Light transformer into the Dimmer module.
2. Plug Dimmer module into wall outlet.
3. Place the pad in any convenient  location.  (Use double sided tape if necessary).
4. Just touch the pad to advance the light to the next position. 1st touch is 10% light, 2nd is 50%, the 3rd touch is 100% light and the 4th touch is off.

Note: Do not use this dimmer with another dimmer in the same circuit.

AME-6043B – Touch Pad Dimmer

1. Replace light bulb with an inexpensive one-way bulb.
2. Turn on your lamp (2nd position on 3-way sockets).
3. Plug the lamp into the dimmer.
4. Plug the dimmer into a wall outlet.
5. Place the Touch Pad in a convenient location. The Pad must not touch any metallic conductive surface as this will overload the sensing signal.

AME-6043C – Holiday Ornament Touch Dimmer

1. Hang lights on tree as you would normally.
2. Insert blade end of enclosed wire into touch dimmer module as indicated in diagram below.
3. Slide opposite end over stem on ornament.
4. Plug lights into dimmer module and module into any standard outlet.
5. Hang ornament anywhere on tree and touch to select the level of light you want: 1st – low, 2nd – medium, 3rd – full brightness, 4th Off.

Note: Do not use this dimmer with another dimmer in the same circuit.

AME-6004B – Touch Dimmer

1. Replace the light bulb with an inexpensive one-way bulb.
2. Turn on your lamp (2nd position on 3-way sockets).
3. Plug the lamp into the dimmer.
4. Plug the dimmer into a wall outlet, wait a moment and touch any  metal  portion of your lamp to select desired light level. 1st Touch – LOW, use as a night light; 2nd Touch – MEDIUM, for normal room light; 3rd Touch – HIGH, full brightness for reading, 4th Touch – OFF.

Note: If the lamp cycles, a quick touch will reset the circuit

Acenti® 15 Amp 120 VAC Non-Dimming Switch w/ LED Locator
From $17.20
Attractive and innovative design installs in place of single wall switch or 3-way switch installation; When the lights are off the blue LED indicator illuminates so users can find the switch in the dark; Can be used in any residential or commercial application.

360 Electrical Rotating Outlets
From $8.99
These rotating outlets allow you to plug in your bulky adapters from cell phones, mp3 players, and more without any obstructions. If an adapter won't fit, simply plug it in and rotate, then lock it in one of any 18 possible positions.

Decora® Manual ON Occupancy Sensor
From $23.88
Leviton's Decora Manual ON Occupancy Sensor detects human motion and responds by keeping incandescent, low voltage and fluorescent lighting ON. If the unit does not detect movement after a set period of time the switch turns the light off. The switch features sensitivity adjustments and integral sliding blinders to customize the field of view.

AmerTac™ Westek® Slide Dimmers
From $16.36
Setting the right amount of light is a sure way to change the mood in a room, however it is not an easy task to accomplish if you don’t have the right equipment for it. Amertac™ introduces Westek® Slide Controlled Dimmers; designed to make dimming your lights very easy and affordable. Take control of your lighting mood with this practical, affordable solution.

AmerTac™ Westek® Foot Control Dimmer
Price $17.25
The Amertac™ Westek® Foot Controlled Dimmer allows you to have the light switch on the floor for a better look. This product is fuse protected and it is designed to withstand the abuse of being on the floor or carpet. The foot control works with 500W halogen or incandescent bulbs for the top quality lighting.

AmerTac™ Westek® Screw-In Lamp
Socket Dimmer
Price $9.61
Possibly the simplest solution for light dimming is the Screw-In Lamp Socket Dimmer from the Amertac™ Westek® line. A perfect solution which doesn’t involve any cables or switches and gets its functionality from a simple touch to any metal part of a lamp. This product eliminates the need for expensive 3-way bulbs therefore also saving money on the electrical bill.