Home Wire Loom Convoluted Raceways Plenum Convoluted Raceway



Plenum Convoluted Raceway

 

Plenum Convoluted Raceway

Enlarge Image

Low Price GuaranteeWhat's special about this plenum tubing?

  • Plenum raceway is corrugated, non-metallic and produced from PVDF (Kynar) resin
  • All sizes come standard with pre-installed UL listed Kevlar pull lines
  • Extremely flexible – will not kink when bent in normal usage
  • Click for More Features
Scroll To Pricing

CableOrganizer.com Plenum and Riser raceways are ideal for installations requiring plenum or riser-rated materials. CableDuct PL exceeds the UL 2024A (formerly UL 910 Steiner tunnel test) requirement for fire and smoke release, and conforms to NEC 2002 Section 770 and 800. More

  • Available in orange and white
  • Bend radius protection ideal for fiber optics
  • Plenum raceway is corrugated, non-metallic and produced from PVDF (Kynar) resin
  • All sizes come standard with pre-installed UL listed Kevlar pull lines
  • Available in orange and white
  • Extremely flexible – will not kink when bent in normal usage
  • Bend radius protection ideal for fiber optics
  • CableDuct PL meets the requirements of NEC 2002 Section 770 and 800
  • Available in sizes from ½” to 2”
  • Variety of packaging options from 250 foot coils to 84” reels

 

A raceway marked "Plenum" is suitable for use in ducts, plenums or other spaces used for environmental air when used to enclose optical fiber cables marked OFNP or communications cable marked CMP or CMP-OF. This raceway exhibits a maximum peak optical density of 0.5, a maximum average optical density of 0.15, and a maximum flame spread distance of 5 feet when tested in accordance with the Test for Flame Propagation and Smoke-Density Values (Plenum) in UL 2024. A marking on the surface of the raceway or on a marker tape indicating "Plenum" identifies this raceway.


Optical Fiber/Communications Cable Raceways
UL tests raceways and fittings for installation of nonconductive optical fiber cables in accordance with Article 770 of the National Electrical Code and communications cables in accordance with Article 800 of the National Electrical Code. Listing includes pliable lengths, rigid straight sections, elbows, bends and fittings such as expansion joints, female and male adapters, and couplings. Individual raceway systems differ in their construction and therefore their components are not interchangeable with other raceways or fittings of other systems. The basic standard used to investigate products in this category is UL 2024, "Optical Fiber Cable Raceway."

Material PVDF Resin
Pull Line or Cable Pre-Installed Kevlar pull tape or cable (up to 7/16" in diameter)
 
UL Standard 2024 (UL Test 910)
Acceptance Criteria Test Method Value
Maximum Flame UL 2024, Sec. 8 1.50 ft
Propogation UL 2024, Sec. 8 0.06
Peak Optical Smoke Density UL 2024, Sec. 8 0.01
 
Fire Resistance
Acceptance Criteria Test Method Value
Oxygen Index ASTM D2863 63%
Flame Rating ASTM D2863 S-E
UL Classification UL 94 V1
 
Electrical Properties
Acceptance Criteria Test Method Value
Dielectric Strength ASTM D149 541 V/mil
Dielectric Constant @ 5 MHz ASTM D150 5.2

NOTE: The use of Plenum Raceway does not eliminate the need for Plenum-rated cable.

get free wire loom tool

Please Note: These products ship in 2 weeks
For reels longer than 250ft, please call for price quote

PART # NOMINAL SIZE ID OD COIL LENGTH COLORS PRICE / COIL
BFTPL050-250FT 1/2" 0.65" 0.85" 250 FT White, Orange
$475.00 Qty:  
BFTPL075-250FT 3/4" 0.87" 1.125" 250 FT White, Orange
$550.50 Qty:  
BFTPL100-250FT 1" 1.10" 1.35" 250 FT White, Orange
$676.50 Qty:  
BFTPL125-250FT 1-1/4" 1.25" 1.60" 250 FT White, Orange
$775.00 Qty:  
BFTPL150-250FT 1-1/2" 1.50" 2.00" 250 FT White, Orange
$1,025.00 Qty:  
BFTPL200-250FT 2" 2.00" 2.50" 250 FT White, Orange
$1,265.00 Qty:  
riser-rated convoluted tubingRiser Convoluted Raceway
From $170.83
A raceway marked "Riser" is suitable for installation in risers when used to enclose optical fiber cable marked OFNP and OFNR or communications cable marked CMP, CMP-OF, CMR or CMR-OF.		 fiber optic patch cordsFiber Optic Patch Cords
From $13.54
Our fiber optic patch cable jumpers assemblies are U.S. manufactured in an ISO 9001:2000 certified factory using only the highest quality components. Each fiber optic patch cable jumper is fully tested, to Telcordia standards, for insertion loss and back reflection prior to shipment. Single mode fiber optic cable types are also tested for APEX, radius and undercut.
 
carlon ent racewayCarlon Resi-Gard Flexible Raceway
From $102.91 per 100ft
Resi-Gard provides an easier way of distributing cabling from a main distribution panel to a secondary hub and other locations where low voltage wiring may be needed. 		 

Currency
Converter


Shop with Confidence