Home > Heat Shrink > High Temperature Heat Shrink Tubing > FEP Heat Shrink Tubing > FEP Specifications
PROPERTY |
ASTM |
TYPICAL VALUE |
| Tensile Strength |
D638 |
2000 psi (13,8 Mpa) 2 inches/mn |
| Elongation |
D638 |
200%, 2 inches/mn |
| Longitudinal Change |
. |
15% |
| Water Absorption |
D570 |
<0.01 %, 24 hours at 23° C |
| Fungus Resistance |
. |
No growth |
| Corrosion |
. |
Non corrosive |
| Fluid resistance |
. |
No change |
Dielectric Strength
Volts/mil (Kv/mm)
Minimum |
D2671 |
500 (12,7) |
| Volume Resistivity |
D876 |
>1018 ohm-cm |
| Voltage Withstand |
. |
Pass |
| Clarity Stability |
. |
Pass (175° ±1° C, 347° ± 2° F), 24 hours |
| Continuous Service Temperature |
. |
-88° F (-67° C) to +392° F (+200°C) |
| Storage Temperature |
. |
18° to 35° C(65° to 95° F) for 4 years |
| Melting Point |
. |
+500 to +530° F |
| Heat Resistance |
. |
(250° ± 3° C, 482° ± 5.4° F), 96 hours |
| Restricted Shrinkage |
. |
Pass (175° ± 2° C, 347° ± 4° F), no cracks |
| Low Temperature Flexibility |
. |
No cracking (-65° ± 1° C, -85° ± 2° F) |
| Flammability |
. |
Non flammable |
|
Can we improve something on this page?
Can this page be improved? Is the information complete and easy to understand? We are always looking to improve our website, so please feel free to give us your comments, suggestions, or questions. Thanks for helping us serve you better!
Cable management. Your way. A click away®
