Erico® Caddy® Within Wall Mounting Plate
Built to mount inside your wall, this mounting plate lets you install faceplates without any gapping, and prevents damage to cable lines by limiting plate movement.
ERICO® CADDY® Fixture Mount Stabilizer Clip
$30.65/ 100 per pk
Designed to stabilize ceiling-mounted signage and fixtures, these stabilizing clips work with square or hex-shaped electrical boxes, and eliminate ceiling tile bulges.
ERICO® CADDY® MP Series Mounting Plates
$127.78 / 100 per pk
Can be installed in most standard sizes of dry wall. They virtually eliminate all need for tools when installing wall plates on a new construction and feature a better grip on the drywall.
Arlington Industries® Cam-Light™ Box
Ideal for use with light fixtures, security cameras, detectors and signage, these mounting boxes install easily into almost any wall or ceiling to support the weight of hanging or suspended fixtures.
Arlington Industries Gard-N-Post Bollard Kit
Perfect for decks, docks, backyards and any other outdoor setting. Designed to stylishly light gardens and pathways while bringing power and low voltage connections conveniently outdoors.
Erico Caddy CER4 Non-Metallic Cable Support
$59.65 / 100 per Pack
Designed to keep cables secure and undamaged behind drywall, these supports mount onto studs to keep cables clear of nails and screws during construction and repairs.
Nail-On Low Voltage Mounting Bracket (new constr.)
Nail-in mounting brackets are a great addition for a fast, painless set up. Available in single and double gang, these bracket mounts are sure to make your low voltage installation an easy one.
ERICO Caddy Electrical Box Bracket
Designed to help you easily identify the mounting orientation of electrical boxes and plaster rings, this bracket makes installations quicker, and prevents damage to drywall.
Vanco Box Buddy Low Voltage Mounting Brackets
Designed to give your home theater a professionally-finished look. Accommodate low-voltage devices in 3, 4 or 8-gang configurations, and keep decorative wall plates perfectly aligned.
ERICO® CADDY® Adjustable Box Mounting Brackets
$119.55 for 50 pk
Designed to precision-mount conduit and electrical boxes in non-standard installations, these adjustable telescopic brackets feature sliding rails, marked measurements and foldable end tabs.
ERICO Caddy® Telescoping Box Support
This bracket allows you to pre-affix gang boxes off-site, and can then be custom-adjusted later during on-site installation to precisely fit any stud spacing between 12 and 24 inches.
Extension Rings & Mounting Brackets
$43.68/ 20 per pack
Designed specifically for mounting Randl® 5 Square boxes. Reduce box opening to standard 4 square size for compatibility with standard equipment, and allow you to mount multiple boxes between studs.
Drywall Protector Plate
Perfect for through-wall wire pulls, electrical work and conduit. Installs without screws or nails, and guards work holes in drywall from unnecessary extra damage.
FSR404 4x4 Box
Available in steel or plastic, these dual-gang wall boxes adapt to different wall thicknesses, and let you install electrical outlets or low voltage connections in any retrofit application.
Solid and Gangable Masonry Boxes
Perfect for installing switches and receptacles into concrete, glass, brick or other types of masonry, these outlet boxes are available in solid or gangable styles, and feature multiple knockoutsS.
InBox™ Retrofit Electrical Box
Comes with a weatherproof-in-use cover, installed bug plugs, (1) standard duplex and (1) GFCI face plate, installation screws, (1) roll of caulk and NM cable connector.
Gangable Plastic Electrical Boxes
Give you the option of ganging up to 10 devices or receptacles without tools, and take up very little storage space. Easily keep parts on hand without having to order for each individual job.
Non-Metallic Adjustable SliderBox™
$43.62/ 6 per pack
Perfect for both new construction and retrofit installs, these non-metallic electrical boxes can have their depths easily adjusted to fit the thicknesses of almost any drywall ordecorative wall finish.
Dual Rapid Link Power
This cost effective solution is perfect for wall mounted HDTV flat screen plasma and LCD TVs. Easy and safe to install and will grant your home or office with that complete professional appearance.
5 SQUARE Telecom Outlet Boxes
$158.40 / 20 per pack
Designed to house low-voltage network cable for Ethernet ports and data jacks, these outlet boxes feature 88 cubic inches of internal space and integrated cable management for bend radius control.
5 SQUARE Fire Alarm Signal Boxes
$114.80/ 20 per pack
Designed for electronic fire alarm systems, this box contains almost twice the interior space of traditional 4 square boxes, so cable shorts and ground faults are far less likely.
NEMA 1 Steel Enclosures
Perfect for indoor/outdoor use as a junction box or storage compartment. With knockouts on all sides for easy conduit installation, and protect components from solid contaminants.
Non-Metallic Enclosure Boxes
Ideal for protecting low voltage devices from debris and tampering in indoor environments. Resist corrosion and heat, and are available with your choice of optional padlock hasp or cam lock.
Steel ONE-BOX™ Fixture Box
This fixture box attaches onto the side of existing joists and beams to accommodate the installation of ceiling fans and hanging lights without the need for new structural supports.
Recessed and Surface-Mounted Wall Boxes
Perfect for anywhere you need tamper-free network connections, these boxes can be recessed or surface mounted, and feature locking clear acrylic doors for extra protection.
3 and 4 Gang Front Access Wall Boxes
Perfect for the security and A/V industries. Provide extra protection for cable connections and control panels, and can be easily installed in new or old constructions.
Plasma/LCD Connection Wall Box
Ideal for use with HDTVs, digital signage, and electronic billboards, this recessed box hides behind wall mounted flat panel displays to provide connectivity without the visible cables.
WB-X Series Wall Box
Featuring a discreet design that won't protrude from the wall, these boxes provide secure in-wall cable access points, complete with built-in wire management, throughout your home.
Single and Dual Gang Recessed Electrical Boxes
These electrical boxes are recessed, or pushed, into the wall creating a few extra inches of precious space. Additionally, they make it possible to wall-mount a computer or small TV.
Recessed Media Box
Featuring a self-healing grommet face that holds cables together while eliminating visible "holes," this media box is an affordable and professional-looking way to route in-wall cables to A/V components.
Recessed Entertainment Box w/ Low Profile Frame
A great way to centralize all your connections in one single recessed box that can be located either in the studs of a wall for new installations or recessed and flush mounted into the wall for retrofits.
Decora Recessed Duplex Receptacles
15Amp/124 VAC. An appealing solution to the discerning user or installer to hide receptacles and modules behind flat screen TV's, monitors, wall units or entertainment units.