Shrinkflex 2:1 Polyolefin
Shrinkflex 2:1 Polyolefin
Heatshrink tubing is the ideal way to create a tight, professional finish on any wire, hose or cable management project. Once shrunk, the tubing will hold its reduced state, even in elevated temperatures. Typical applications for the heatshrink tube include: electrical insulation, termination, splicing, cable bundling, color coding, strain relief, wire marking, identification, mechanical protection, corrosion protection, abrasion protection and moisture and weather sealing.
Part Number: H2N0.13BK-1
Couldn't load pickup availability
Certifications
What's Special
What's Special
- General purpose heatshrink is the economical solution for everyday heatshrink applications.
- These products are available in a variety of different shrink ratios and colors for ultimate customization.
- Shrinks to 1/2 of the original diameter to conform to oddly shaped objects, and provides secure termination of wire loom / braided sleeving projects.
Features
Features
- Flammability Rating: UL-224 VW-1
- Recommended Cutting: Scissor
- Colors: 11
- Minimum Continuous Temp: -67 ºF / -55 ºC
- Maximum Continuous Temp: 275 ºF / 135 ºC
- Melt Temp: 392 ºF / 200 ºC
Polyolefin:This is the most commonly used heat shrink material and works for most heat shrink applications. Polyolefin comes in a variety of colors, sizes, shrink ratios, and has an operating temperature of -67° F to +275° F. Keep in mind, Polyolefin has a low tolerance for UV resistance compared to other shrink tubing.
What Does Shrink Ratio (2:1, 3:1, Etc..) Mean?
The shrink ratio is the approximate maximum amount that heatshrink tubing will shrink relative to the unshrunk diameter. For example, a piece of 3/4" heatshrink tubing with a 3:1 shrink ratio will shrink down to a maximum diameter of approximately 1/4" when fully shrunk. All heatshrink tubing on our site is specified in it's UNSHRUNK diameter, so consider the shrink ratio and the unshrunk diameter when ordering heatshrink tubing. Heatshrink tubing with a larger shrink ratio will be more forgiving when fitting the tubing over plugs or connectors, but will have a bit thicker wall thickness and slightly less flexibility when shrunk then a lower ratio product.
Specifications
