3M™ FireDam™ Spray 200
3M™ FireDam™ Spray 200
FireDam™ Spray 200, a faster drying firestop, is perfect for sealing head of wall, floor to wall, penetration seals, and perimeter joints between fire-rated floors (concrete, fireproofed fluted steel decks) and fire-rated walls (gypsum, concrete). With just 1/8 inch (3mm) coating, it will help control the spread of fire, heat, smoke, noxious gas and water before and during exposure to fire. Application is simple, using conventional airless sprayers. The coating dries under ambient conditions to a neutral gray color and the joints are flexible to allow for compression and extension of up to +/- 25% of nominal joint width.
Part Number: FP-3MFDS-EA
Couldn't load pickup availability
Certifications
What's Special
What's Special
- High-cling properties help prevent sagging
- Applied with conventional airless sprayers
- Cleans easily with water (no solvents required)
- Superior adhesion to most construction materials
Features
Features
Always a leader in fire protection and firestop systems, 3M has added FireDam Spray 200 to its impressive list of firestop products. FireDam™ Spray 200 is UL and Intertek listed. The coating meets ASTM E 1966 and UL2079 specifications for fire testing at the maximum joint width. This product has been cycled to meet the wind sway and thermal category of ASTM E 1399. The coating has also meets through penetration criteria as evaluated by ASTM E 814 and UL 1479. It also complies with IBC, ICC, BOCA, ICBO, SBCCI and NFPA Code #101. Tested for up to 4 hours.
Fast drying
Dries to a neutral gray color
Highly elastic
Paintable when cured
Available in five-gallon pails
90 day warranty
UL Classified, Factory Mutual, and Omega Point Laboratories listed
FM approved (FMRC Approval Guide)
Complies with IBC, ICC, BOCA, ICBO, SBCCI and NFPA Code #101
Meets fire testing criteria of ASTM E 1966 and UL2079 at maximum extended joint width
Meets wind sway cycle and thermal category of ASTM E 1399 (500 cycles at a minimum of 10cycles per minute)
Meets ASTM E 814 and UL1479 for through penetrations
Specifications
