WireRun 6:1 High Ratio Heat Shrink Tubing
Shrink Tubing for Any Size Application
What's special about this 6:1 Heat Shrink Tubing?
- Very high shrink ratio of 6:1, shrinks to 1/6th of its size to accommodate large bulky cables or adapters
- Tubing is lined with a hot melt adhesive that melts to create a weatherproof seal
- Conforms to UL94V-0 Standards of flammability
- Conforms to MIL-DTL-23053/15, Class 1 specifications for adhesive lined heat shrink tubing
- Click for More Features
This 6:1 ratio heat shrink tubing is ideal for creating weatherproof seals for large cable bundles. This tubing conforms to UL94V-0 Standards for flammability and is Military specified for adhesive lined heat shrink tubing under, MIL-DTL-23053/15, Class 1. This tubing shrinks down to 1/6th of its size to accommodate large cable assemblies and adapters.
- Available in black only to provide UV resistance
- 6 sizes available to meet all heat shrinking needs including
- --Sealing multiple wires
- --Splicing or joining wire
- --Providing strain relief on cables
- --Cables and connectors that are extremely different in size and shape
- Adhesive and strong polyolefin tubing combine to create a puncture resistant seal
- Operating temperature from -55° to 110°C (67° to 230°F) to withstand harsh environments
- Tensile strength of 2100 PSI for strain relief
MIL SPECS | UL | CSA | MATERIAL | RECOVER TEMP. | CONTINUOUS OPER. TEMP. | FLAMMABILITY |
MIL-DTL-23053/15, Class 1 | - | - | Polyolefin | 120°C (248°F) |
-55°C to 110°C (67°F to 230°F) |
Flame Retardant Meets UL-94, V-0 Flame Rating |
View Measurement Conversion Chart
ORDER REF. NO. METRIC / IMPERIAL |
EXPANDED | RECOVERED | LENGTHS | ||
INTERNAL DIAMETER (MIN) D (mm/in) |
INTERNAL DIAMETER (MAX) d (mm/in) |
WALL THICKNESS (MIN) W (mm/in) |
METRIC | IMPERIAL | |
0190 / 0750 | 19.0 / 0.750 | 3.2 / 0.125 | 3.2 / 0.123 | 121cm | 48" |
0330 / 1300 | 33.0 / 1.300 | 5.5 / 0.220 | 3.4 / 0.135 | 121cm | 48" |
0444 / 1750 | 44.4 / 1.750 | 7.4 / 0.290 | 3.6 / 0.140 | 121cm | 48" |
0508 / 2000 | 50.8 / 2.000 | 8.3 / 0.330 | 4.3 / 0.170 | 121cm | 48" |
0698 / 2750 | 69.8 / 2.750 | 11.7 / 0.460 | 4.8 / 0.190 | 121cm | 48" |
0889 / 3500 | 88.9 / 3.500 | 17.1 / 0.673 | 4.3 / 0.170 | 121cm | 48" |
1194 / 4700 | 119.4 / 4.700 | 22.9 / 0.900 | 4.8 / 0.190 | 121cm | 48" |
PROPERTY |
TEST METHOD |
TYPICAL PERFORMANCE |
Physical | ||
---|---|---|
Tensile Strength | ASTM D412, ISO 037 | 2100 psi (14.5 MPa) |
Elongation | ASTM D412, ISO 037 | 600% |
Elongation after Heat Aging (168 hrs at 150°C) |
ASTM D2671 | 400% |
Heat Shock (4 hrs at 225°C) | ASTM D2671 | No cracking or flowing |
Longitudinal Change | ASTM D2671 | +1%, -10% |
Low Temperature Flexibility (4 hrs at -55°C) |
ASTM D2671 | No cracking |
Specific Gravity | ASTM D792 | 1.10 |
Hardness (Shore D) | ASTM D2240 | 500 |
Electrical | ||
Dielectric Strength | ASTM D149, IEC 243 | 500 V/MI (20 KV/mm) |
Dielectric Voltage Withstand (2500 V, 60 Hz, 1 min) |
UL 486D | No breakdown |
Volume Resistivity | ASTM D257 | 1016 ohm-cm |
Chemical | ||
Fluid Resistance | MIL-DTL-23053 | Good to excellent |
Fungus Resistance | ASTM G21 | No growth |
Copper Corrosion | ASTM D2671 | No corrosion |
Water Absorption | ASTM D570 | 0.1% |
Adhesive | ||
Adhesive Lap Sheer (1 in/min at 23°C) |
ASTM D1002 | 125 ps (.875 Mpa) |
Adhesive Softening Point | ASTM E28 | 92°C/-5°C |
Adhesive Peel Strength (300 in/min at 23°C) • to steel, aluminum, P. E. • PVC |
ASTM D1000 | 35 pli 20 pli |
Adhesive Blocking (30°C) | ASTM D1146 | No blocking |
Water Penetration | STM 706 | No penetration after 236 hrs of continuous immersion |
Limiting Oxygen Index (LOI)
The ratio of how much oxygen - as compared to other gases - needs to be present in the air surrounding a particular material in order for that material to burn. The fact that Earth's normal atmospheric air contains around 21% oxygen is used a reference point when materials are classified into burn categories that are based on Limiting Oxygen Index. Substances that are combustible in air containing less than 21% oxygen are considered flammable, while those that burn in the range of anything greater than 21% but less than 28% are typically labeled "slow burning". Any material with an LOI that exceeds 28% is classified as self-extinguishing.
In the table below, you'll find a list of polymers commonly found in our heat shrink tubing and braided sleeving products, along with their LOIs and the burn categories each falls into.
MATERIAL | ALTERNATE NAME | LOI | CATEGORY |
ECTFE (Ethylene chlorotrifluoroethylene) | Halar | 64% | Self Extinguishing |
Nomex | N/A | 28% | Slow Burning |
Nylon 6:6 | N/A | Ranges fron 24-29% | Slow Burning to Self Extinguishing |
PET (Polyethylene Terephthalate) | Mylar (film), Dacron (fiber) | Ranges from 21-34% | Slow Burning to Self Extinguishing |
Polyethylene (PE) | N/A | 17% | Flammable |
Polypropylene (PP) | polythene (in the UK) | 17% | Flammable |
Polytetrafluoroethylene (PTFE) | Teflon | 95% | Self Extinguishing |
Polyvinyl Chloride (PVC) | N/A | Ranges from 45-49% | Self Extinguishing |
RELATED ARTICLES -
- Instructions on how to use Heat Shrink Tubing. Click here
- Terminate the ends of your Braided Sleeving? Click here
- How do we measure Heat Shrink? View here
- Heat Shrink Tubing: How It Was Invented, and Why We Use It
- The Handyman's Guide to Improvisation: 7 New Ways to Use Heat Shrink Tubing

Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 866-222-0030
Questions & Answers
Do you have any questions about this product?
Let our experts and customers resolve all your doubts
Reviewed by 1 customer
Displaying review 1
Pros
- Easy To Set Up
- Quality Construction
Cons
Best Uses
Comments about NSPA Heat Shrink Tube Adhesive Lined (Dual Wall) From 3/4" To 1/8", 4Ft:
This is a great product for outdoor use. The weather and hot/cold are always concerns when getting a product to protect outdoor cables and adapters. This product is the solution.
- Primary use:
- Business
- Was this a gift?:
- No
Displaying review 1