Telescoping Poles

Reach Across the Ceiling or Floor to get Cables with Ease

IT-TP16-1
Qty:  
We Guarantee to Have the Best Price

What's special about these Telescoping Fiberglass Poles?

  • Constructed of non-conductive fiberglass to prevent shock and won't rust or corrode
  • The 16' poles are 2' long collapsed and the 26' poles are 3' long collapsed
  • Poles are coated with baked enamel to protect against rust and corrosion
  • Click for More Features

These telescoping poles are used for installing cables in long spans in hard to reach areas such as ceilings, floors, and crawl spaces. Each rod extends to 16’ or 26’ long and collapses down to 2’ to 3’ in length for easy storage and handling. The material is non-conductive wound filament fiberglass with a polyester resin baked enamel coating. This coating gives the extendable pole additional strength and protection from rust and corrosion.

Standard Poles
Part #DescriptionExtended LengthCollapsed LengthColorTotal WeightPrice
IT-TP16-116' Telescoping Pole and "All purpose hook (IT-PPA6)"16'2'Yellow1.97 lbs
Qty:  
IT-TP26-126' Telescoping Pole and "All purpose hook"26'3'Yellow2.1 lbs
Qty:  

NOTE: Due to its nature, these products are solely warranted against factory defects

Heavy Duty Poles
Part #DescriptionExtended LengthCollapsed LengthColorTotal WeightPrice
CMD-TP16-HDTelescoping Push Pull Rods - Heavy Duty - 16 feet16'2'Yellow2.4 lbs
Qty:  
CMD-TP26-HDTelescoping Push Pull Rods - Heavy Duty - 26 feet26'3'Yellow2.97 lbs
Qty:  

NOTE: Due to its nature, these products are solely warranted against factory defects

Accessories
Part #ImageDescriptionPrice
IT-PP6-1Telescoping Poles IT-PP6-15 FT Extension Rod
Qty:  
IT-PPE6Telescoping Poles IT-PPE6Pulling Eye
Qty:  
IT-PPH6Telescoping Poles IT-PPH6Standard Hook
Qty:  
IT-PP-RTelescoping Poles IT-PP-RMiniature Roller Guide (1)
Qty:  
IT-PP-LTelescoping Poles IT-PP-LLED Bullet Tip
Qty:  
IT-PPQ-24Telescoping Poles IT-PPQ-24Ball & Chain
Qty:  
IT-PPA6Telescoping Poles IT-PPA6All Purpose Hook
(Purchase of a Telescoping Pole (IT-TP16-1 or IT-TP26-1) includes this all purpose hook)
Qty:  
IT-PPG6Telescoping Poles IT-PPG6Grabbit Hook
Qty:  
IT-PPM6Telescoping Poles IT-PPM6Magnet Locator (whole earth)
Qty:  
IT-PPFMTelescoping Poles IT-PPFMMagnet with 3" flexible extension
Qty:  
IT-PPU6Telescoping Poles IT-PPU6Swiveling Universal Tip
Qty:  
IT-B25Telescoping Poles IT-B25Bullet Tip
Qty:  
IT-PPF6Telescoping Poles IT-PPF6Pulling Eye with 3" Flexible Extension
Qty:  

WARNINGS: Wear approved eye protection

  • Additional attachments can be purchased to assist with variety of tasks
  • Heavy Duty poles feature sturdier pole for more rigorous jobs
  • Poles have a 1/4" - 20 thread rod
  • Made in the USA USA


NOTE: Due to its nature, this product is solely warranted against factory defects

 STANDARD POLE Features:

  • 16' extended pole - 1-1/2" diameter at base, 2' long collapsed, 1/4" diameter at tip
  • 26' extended pole - 1" diameter at base, 3' long collapsed, 1/4" diameter at tip
  • Made of non-conductive, wound filament fiberglass that won't rust or corrode
  • Polyester resin baked enamel coating
  • Each pole comes with 1 All-Purpose hook

 HEAVY DUTY POLE Features:

  • 16' extended pole - 2" diameter at base, 2' long collapsed, 1/4 " diameter at tip
  • 26' extended pole - 2" diameter at base, 3' long collapsed, 1/4" diameter at tip
  • Non-conductive wound filament fiberglass with polyester resin baked enamel coating
  • Sturdier construction for more rigorous use by tradesmen
  • Metal ring to accommodate cables
  • Can be used with the same attachments as standard model
Part # Collapsed Length Full Length Base Diameter Tip Diameter Thread Type Weight
IT-TP16-1 2' 16' 1-1/2" 1/4" 1/4" - 20 1.97 lbs
IT-TP26-1 3' 26' 1" 1/4" 1/4" - 20 2.1 lbs
CMD-TP16-HD 2' 16' 2" 1/4" 1/4" - 20 2.4 lbs
CMD-TP26-HD 3' 26' 2" 1/4" 1/4" - 20 2.97 lbs

HOW-TO CORNER -

 

Did you know that we can give you a quote for most of our products, including shipping?


You can also call us toll free 866-222-0030

Questions & Answers

Question:

what does the 26' pole weigh

Asked by Anonymous user on 04/1/2015 10:58 AM

Answer:
  • - Thank you for your question. The 26 ft pole weights 2.1 Lbs

    Fernando M. on 11/9/2015 4:10 PM
Question:

Do the telescoping sections lock? - Wondering how much push-pressure you can use without the sections collapsing...is there any sort of locking for the sections? I have a smaller pole where you twist the sections and they stay locked in place.

Asked by Anonymous user on 12/23/2015 3:52 PM

Answer:
  • - These poles do not have a locking mechanism integrated into the segments. The poles can provide very little pushing pressure before they begin to collapse. Pulling provides much more flexibility with the weight capacity, but the threaded ends can snap off if excessive weight is pulled with these poles.

    Steve S. on 02/17/2016 10:06 AM
Question:

Do they have a hook at the tip

Asked by Anonymous user on 06/12/2016 11:04 AM

Answer:
  • - Thank you for your question - this product comes with an all purpose hook

    thiago t. on 01/10/2017 11:02 AM
Question:

what is the difference between the cmd tp26-hd and the it tp26-1

Asked by Anonymous user on 01/28/2017 1:41 PM

Answer:
  • - Thank you for your question. The heavy duty pole has a 2" diameter at base and it's designed for more rigorous use by tradesmen. Please call 866-222-0030 if you have any additional questions

    thiago t. on 01/31/2017 3:14 PM
Question:

I need a compact pole for collecting scientific specimens from trees. Would this pole be able to support a small sickle on the end, which would be used to cut small twigs (up to 1/2") by pulling?

Asked by Anonymous user on 05/25/2017 6:32 PM

Answer:
  • - Hello, the telescoping pulling pole would not work for this application as it might be a little too flexible and not have enough force to pull on the items you are cutting

    Anonymous user on 05/30/2017 11:31 AM
Question:

I work in the fire protection industry testing alarm Systems. I am able to test certain smoke detectors With a magnet. My question is, would this pole Be suitable to affix a small magnet to the end with tape To reach high ceiling mounted smoke detectors?

Asked by Anonymous user on 07/25/2017 1:56 PM

Answer:
  • - Hello, As long as it is taped securely, this item will work great for you.

    Anonymous user on 07/27/2017 2:09 PM
Question:

What is the Thread type on end of pole?

Asked by Anonymous user on 10/11/2017 11:27 AM

Answer:
  • - Hello, The type of thread is standard, and the size is � inch and 20 threads.

    andrew b. on 11/2/2017 4:37 PM
Question:

Does the bullet tip have enough space for a CAT6 cable?

Asked by Anonymous user on 10/24/2017 4:01 PM

Answer:
  • - Hello, The bullet tip is not large enough to accommodate the cat 5 cable. In truth it is not a good idea to pull any cable attached just to the bullet tip The best idea is to attach the cat 5 cable to a ?Pull String? and then hand pull the data cable back through the pipe or conduit.

    andrew b. on 10/31/2017 3:06 PM

Do you have any questions about this product?
Let our experts and customers resolve all your doubts