Custom Printed Heat Shrink Tubing

Personalize Heat Shrink for Your Organization or Project


Scroll To Pricing

What's special about this personalized heat shrink?

Fully customizable with any font, your company logo, and a variety of sizes and color combinations, our custom printed heat shrink is sure to add just the finishing touch your project needs.

*Please Note: If you measure your heatshrink flat the diameter will NOT match the size you ordered. To correctly determine the heat shrink diameter measure the width of the flat tubing then multiply the width by 2, and divide this number by Pi (3.1416) to determine the correct nominal diameter.

For a Custom heat shrink quote, please email one of our Customer Service Representatives.
50 piece minimum.

Email sales@cableorganizer.com

 

  1. Choose between 2 shrink ratios for various applications:
    1. 3:1 for going over large connectors, splices, or plugs
    2. 2:1 for applications using smaller or no connectors

    For the best results, please follow the guidelines listed below. These guideĀ­lines will reduce the printing time while increasing the quality of your print.

    • Provide a high quality JPG image of 300 dpi.
    • Provide a black & white version of your image. Our system will convert any color images to black and white and the results may not be what you had intended.
    • Download Our Printing Guide.

 

Physical
Proprietary Test Method Typical Value
Tensile Strength ASTM D 638 13 N/nm2
Elongation at Break ASTM D 638 400%
Longitudinal Change ASTM D 2671 +5%, -5% maximum
Water Absorption ASTM D 570 0.15% maximum
Specific Gravity ASTM D 792 1.4
 
Electrical
Dielectric Strength ASTM D 2671 25kV/mm
Volume Resistivity ASTM D 257 10@ 14 ohm.cm
 
Chemical
Fungus Resistance MIL-I-7444 Inert
Fluid Resistance MIL-I-23053/5 Good
Copper Corrosion ASTM D 2671 B Good
 
Thermal
Continuous Operating Temperature   -55° to 135° C
Minimum Shrink Temperature    >90° C
Heat Shock 4 Hours at 250° C ASTM D 2671 No dripping, cracking, or flowing
Heat Aging 168 Hours at 150° C ASTM D 638 Elongation 300%
Low Temperature Flexibility -55° C ASTM D 2671C No cracking
Flammability
(* Clear Tubing is not Flame Retardant)
UL 224 VWI Pass (colors only)

Specification Reference:

UL 224 125° C, 600V, VW-1
CSA-C22.2 No 198-M1986 125° C, 600V
File LR33298 Guide 400-U-9

2:1

SIZE EXPANDED RECOVERED
Internal Diameter
Minimum
Internal Diameter
Maximum
Total Wall Thickness
Minimum
inch mm inch mm inch mm
3/64" 1.4 0.022 0.58 0.013 0.33
3/32" 2.8 0.046 1.17 0.017 0.432
1/8" 3.5 0.062 1.57 0.017 0.432
3/16" 5 0.093 2.36 0.017 0.432
1/4" 6.5 0.125 3.18 0.022 0.559
3/8" 9.6 0.187 4.75 0.022 0.559
1/2" 12.8 0.25 6.35 0.022 0.559
3/4" 19.3 0.37 9.35 0.027 0.686
1" 25.7 0.5 12.7 0.03 0.762
1-1/4" 32.2 0.63 16 0.034 0.864
1-1/2" 38.1 0.586 14.9 0.034 0.864
2" 51 1 25.4 0.038 0.965
3" 76.2 1.5 38.1 0.042 1.07
4" 102 2 50.8 0.046 1.17
5" 127 2.5 63.5 0.046 1.17

 

3:1

Size Expanded Recovered
Internal Diameter
Minimum
Internal Diameter
Maximum
Total Wall Thickness
Minimum
inch mm inch mm inch mm
1/8" 0.12 3 0.04 1 0.04 1
3/16" 0.18 4.5 0.06 1.5 0.04 1
1/4" 0.24 6 0.08 2 0.04 1
3/8" 0.36 9 0.12 3 0.05 1.2
1/2" 0.47 12 0.16 4 0.06 1.4
3/4" 0.75 19 0.24 6 0.08 2
1" 0.94 24 0.32 8 0.087 2.2
1-1/2" 1.57 38 0.44 13 0.09 2.3
2" 1.969 50 0.669 17 0.1 2.5
3" 2.953 75 0.984 25 0.1 2.5
4" 3.937 100 1.338 34 0.1 2.5
Related Articles




 

How-To Corner



 

Request A Quote

Did you know that we can give you a quote for most of our products, including shipping?

You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)

Questions & Answers

Do you have any questions about this product?
Let our experts and customers resolve all your doubts