Signamax™ Category 6A UTP Pre-Terminated Trunk Cable
Custom Length, Ready-to-Install Cable Assemblies
SX-6L-C6A-JJ-P-F010
What's special about these pre-terminated Cat6A cables?
- High-performance category 6A patch cables pre-terminated with professional-grade keystone jacks that are designed to greatly reduce installation time and labor costs in large cabling installations
- Keystone jacks are compatible with most standard unloaded patch panels and work-area outlet systems to make field installations easy and efficient by eliminating cutting, stripping, and wire terminating operations
- Available in unshielded and shielded twisted pair cable assemblies, with either jack-to-jack or jack-to-blunt cut configurations to accommodate almost any custom application or job requirement
- Click for More Features
Signamax™ Category 6A Trunk Cables offer field technicians and networking professionals a fully assembled, multi-cable solution that's designed to improve efficiency and reduce labor cost and waste in large infrastructures with high-density cross-connection and patching systems. These CAT 6A cable assemblies come either pre-terminated with keystone jacks on both ends for simple plug and play installation, or with jacks on one side and un-terminated cables on the other for precise custom applications.
PLEASE NOTE: These cables are non-cancelable and non-returnable
*** Custom Lengths Available - Call 1-866-222-0030 for more details.
| Category 6A 10G 6-Leg Trunk Cable, Unscreened (UTP) Cable - Jack to Jack | ||||
|---|---|---|---|---|
| Part # | Length | End Type | Color | Price |
| SX-6L-C6A-JJ-P-F010 | 10 Ft | Jack to Jack | Blue | |
| SX-6L-C6A-JJ-P-F015 | 15 Ft | Jack to Jack | Blue | |
| SX-6L-C6A-JJ-P-F025 | 25 Ft | Jack to Jack | Blue | |
| SX-6L-C6A-JJ-P-F050 | 50 Ft | Jack to Jack | Blue | |
| SX-6L-C6A-JJ-P-F075 | 75 Ft | Jack to Jack | Blue | |
| SX-6L-C6A-JJ-P-F100 | 100 Ft | Jack to Jack | Blue | |
| Category 6A 10G 6-Leg Trunk Cable, Unscreened (UTP) Cable - Jack to Open | ||||
|---|---|---|---|---|
| Part # | Length | End Type | Color | Price |
| SX-6L-C6A-JB-P-F010 | 10 Ft | Jack to Open | Blue | |
| SX-6L-C6A-JB-P-F015 | 15 Ft | Jack to Open | Blue | |
| SX-6L-C6A-JB-P-F025 | 25 Ft | Jack to Open | Blue | |
| SX-6L-C6A-JB-P-F050 | 50 Ft | Jack to Open | Blue | |
| SX-6L-C6A-JB-P-F075 | 75 Ft | Jack to Open | Blue | |
| SX-6L-C6A-JB-P-F100 | 100 Ft | Jack to Open | Blue | |
| Category 6A 10G 6-Leg Trunk Cable, Screened (FTP) Cable - Jack to Jack | ||||
|---|---|---|---|---|
| Part # | Length | End Type | Color | Price |
| SX-6L-C6AS-JJ-P-F010 | 10 Ft | Jack to Jack | Gray | |
| SX-6L-C6AS-JJ-P-F015 | 15 Ft | Jack to Jack | Gray | |
| SX-6L-C6AS-JJ-P-F025 | 25 Ft | Jack to Jack | Gray | |
| SX-6L-C6AS-JJ-P-F050 | 50 Ft | Jack to Jack | Gray | |
| SX-6L-C6AS-JJ-P-F075 | 75 Ft | Jack to Jack | Gray | |
| SX-6L-C6AS-JJ-P-F100 | 100 Ft | Jack to Jack | Gray | |
| Category 6A 10G 6-Leg Trunk Cable, Screened (FTP) Cable - Jack to Open | ||||
|---|---|---|---|---|
| Part # | Length | End Type | Color | Price |
| SX-6L-C6AS-JB-P-F010 | 10 Ft | Jack to Open | Gray | |
| SX-6L-C6AS-JB-P-F015 | 15 Ft | Jack to Open | Gray | |
| SX-6L-C6AS-JB-P-F025 | 25 Ft | Jack to Open | Gray | |
| SX-6L-C6AS-JB-P-F050 | 50 Ft | Jack to Open | Gray | |
| SX-6L-C6AS-JB-P-F075 | 75 Ft | Jack to Open | Gray | |
| SX-6L-C6AS-JB-P-F100 | 100 Ft | Jack to Open | Gray | |
- Cables are available with either a plenum- or riser-safe jacket to satisfy strict building codes and installation requirements
- Each cable assembly is terminated and tested in a controlled manufacturing environment to help ensure that every installation is efficient and problem-free
- Conveniently assembled with six legs to accommodate most patch panel port densities without wasting any cable
- Neatly bundled together into a single easy-to-manage cable to promote better airflow and organization when compared with individual cable terminations
- Breakout point provides enough cable slack for a clean, efficient installation without compromising cable management or a safe bending radius
| TRANSMISSION PERFORMANCE | ANSI/TIA-568-C.2 |
|---|---|
| Meets or exceeds category 6A (1–500 MHz) specifications NOTE: All cable trunks require field testing after installation |
|
| TRANSMISSION MEDIA | Unscreened 100-Ohm twisted pair (U/UTP) |
| Screened 100-Ohm twisted pair (F/UTP) | |
| JACK TYPE | 8p8c (8-position, 8-contact) “RJ45” style Keystone design |
| WIRING SCHEME | ANSI/TIA-568-C.2: T568B |
| WIRE GAUGE | 23 AWG |
| ELECTRICAL – JACK | |
| Insulation resistance: | Minimum 500 MOhm @ 100 VDC |
| Dielectric withstanding voltage: | 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min |
| Spring wire contact resistance: | Maximum 20 mOhm |
| IDC contact resistance: | Maximum 2.5 mOhm |
| ELECTRICAL – CABLE | |
| Spark test: | 2,000 ± 250 VAC |
| Dielectric strength: | 2,500 VDC/ 3 seconds |
| Insulation resistance: | Minimum 150 MOhm/km (46) |
| Conductor resistance: | Maximum 9.38 Ohm / 100 m (328 ft) @ 20 °C (68 °F) |
| Resistance unbalance: | Maximum 2 % |
| Capacitance unbalance: | Maximum 160 pF / 100 m (328 ft) |
| Mutual capacitance: | Maximum 5,600 pF / 100 m (328 ft) |
| CONSTRUCTION – JACK | |
| Housing: | High-impact thermoplastic, UL94V-0 fire-retardant |
| Jack spring wire: | Phosphor bronze alloy plated with 50 μin of gold over 70–100 μin of nickel |
| IDC: | 110-type, phosphor bronze alloy with 100-μin 100% tin (Sn) alloy |
| MOUNTING DIMENSIONS – JACK | D 30.00 mm x H 19.30 mm x W 16.90 mm (D 1.181 in x H 0.760 in x W 0.665 in) |
| CONSTRUCTION – CABLE | |
| CONDUCTOR: | Material: Bare copper |
| Size: 23 AWG | |
| Construction: 1/0.560 ± 0.02 mm, (1/0.0221 ± 0.001 in) | |
| INSULATION: | Thickness max average: 0.24 mm (0.010 in), min at any point: 0.18 mm (0.007 in) |
| Diameter: 1.04 ± 0.06 mm (0.041 ± 0.002 in) | |
| Color Coding: blue/white-blue orange/white-orange green/white-green brown/white-brown |
|
| Elongation: Minimum 300 % | |
| Tensile strength: Minimum 1.682 kg/mm? (0.0058 psi) | |
| SHEATH: | Diameter: 6.3 ± 0.3 mm (0.25 ± 0.01 in) |
| Color: See ORDERING INFORMATION | |
| Elongation: Minimum 100 % | |
| Tensile strength: Minimum 1.407 kg/mm² (0.005 psi) | |
| Thickness average: 0.50 mm (0.020 in), | |
| minimum at any point: 0.40 mm (0.016 in) Aging at 100°C for 168 hrs – minimum Elongation retention: 50 %, minimum tensile Strength retention: 75 % |
|
| MECHANICAL – JACK | |
| Total contact force: | Minimum 800 g for 8 wire leads |
| Retention force: | 50 N (11 lbf) for 60 ± 5 s |
| Mating cycle life: | Minimum 750 cycles |
| MECHANICAL – CABLE | |
| Tensile strength: | > 400 N (90 lbf) |
| Minimum bend radius: | 25 mm (1 in) |
| ENVIRONMENTAL CONDITIONS | |
| Storage: | -40 °C – +70 °C (-40 °F – +158 °F) |
| Operation: | -10 °C – +60 °C (+14 °F – +140 °F) |
| RH (operation): | Maximum non-condensing 93% |
| COMPLIANCE | ANSI/TIA-568-C.2 |
| IEC 60603-7 | |
| IEC 61156-6 | |
| IEC 60332-1-2 | |
| FCC Part 68 Subpart F | |
| UL 94V-0 | |
| UL 444 | |
| UL 1666 | |
| APPLICATIONS | X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100, |
| 100BASE-VG, ATM LAN 25/51/155, TP-PMD | |
RELATED ARTICLES -
HOW-TO CORNER -
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 866-222-0030
Questions & Answers
Do you have any questions about this product?
Let our experts and customers resolve all your doubts