What's special about this media convertor?
- Introduces power at the end of long fiber runs; this way, no data integrity is lost and remote PoE devices get power and network connection
- Provides a full 25.5 watts of power; compatible with 802.3at and 802.3af
- Accepts singlemode and multimode (62.5µm/50µm) cable through an SFP module of your choosing
- Supports 9.6kb jumbo frames for superior network performance
- Ideal for powering remote security cameras, switches, wireless access points and more
Fiber optic cabling cannot carry power but it can carry data over very long distances without significant signal loss. Copper cabling is just the opposite. This fiber-to-PoE media converter provides a much needed unification of these cables. It saves the cost and trouble of the many extenders, amplifiers, and huge spools of cabling you would need to run PoE Ethernet over distances up to 10 km (singlemode). This unit takes over at the end of the fiber run, adding power and continuing the data up to 10 m (300 ft.). It's perfect for remote IP cameras, Ethernet switches WAPs, and other PoE network devices.
|PART #||DESCRIPTION||CABLE TYPE||DISTANCE||PRICE|
|SX-065-1050GSFP||(1) Signamax Fiber to PoE Media Converter w/ (1) AC Power Supply||RJ-45/SFP Module||up to 10 km (depends on SFP module/cabling)|
|SX-065-79SXMG||1000BaseSX SFP (Mini-GBIC) Fiber Interface||62.5 micron Multimode
50 micron Multimode
|62.5 micron: 220 m (721 ft)
50 micron: 550 m (1804 ft)
|SX-065-79LXMG||1000BaseLX SFP (Mini-GBIC) Fiber Interface||Singlemode||10 km (32,808 ft)|
|Applicable Standards||IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX/UX/ZX (1000Base SFP6 dependent)
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet Plus (PoE+
|Fixed Ports||1 RJ645 10/100/1000BaseT/TX Auto6Negotiation, Auto 6MDI/MDIX port; 100 meters maximum distance for 10/100/1000BaseT/TX over Category 5e or better cable|
|Plus||1 1000Base SFP module receptacle port. Fiber optic types and distances spanned are SFP6 dependent.
Required 1000Base SFP modules are sold separately
|Led Status Indicators|
|Latency||<4.5 μs (LIFO)|
|Throughput @ 1000Base||1,488,100 pps (646byte packets|
|Case Dimensions||4.02” L x 2.96” W x 0.91” H
(102mm x 75mm x 23mm)
|Weight||0.51 pounds (230 grams)|
|Maximum Wattage||6 Watts (maximum, converter circuitry only), plus the PoE/PoE+ power required to support the connected PD|
|Pse Power Feed Support||Mode A
"Endpoint", via TP pin 1, 2, 3, 6
|Maximum Poe Wattage Deliverable||Full 25.5 Watts allowable in the IEEE 802.3at standard, at the end of a 100 meter Category 5e or better cable run|
|External Power Adapter||48 V DC; 0.83 A.|
|Operating Temperature||32°F to 113°F (0°C to 45° C)|
|Storage Temperature||64°F to 194°F (620°C to 90°C|
|Relative Humidity||10 to 90%, non-condensing|
MANUALS & USER GUIDES
RELATED ARTICLES -
- Setting up Fiber Optics Technology
- Fiber Optic Fusion Splicers and How They Work
- Why Should I Use 'Low Smoke Zero Halogen' Cables?
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 866-222-0030
Questions & Answers
Do you have any questions about this product?
Let our experts and customers resolve all your doubts