MS2 Dual Desk Outlet

- Thank you for your question. The 3/3 option refers to 3 on each side, 3 power on one side, 3 data on the other.

- Thank you for your question. The manufacturer instructions do not indicate a minimum or maximum table thickness, seems like it wouldn't matter as it attaches from the top and cables would hang through the cutout hole.

- The 2/2 configuration refers to each independent segment of the MS2 box. A box designated as 2 Power and 2 Open Ports will actually contain a total of 4 power and 4 open ports when you combine the two separate tilt-up segments. The box we call 4/4 will contain a total of 8 power and 8 open ports. The 4/4 box is quite long and will require a table cut out of 4" x 28.19"

- Hello, This product is made of Aluminum

- Hello, Hardwired is where there isn't a plug at the end of the cord for the desk outlet, so you will take the wires and connect them to the wires in your wall this is semi-permanent in the sense that you can't just unplug the unit. 3-Prong is the plug attached to the cable, with this, all you have to do is plug it into a receptacle in the wall to use this desk outlet. If you want to move the desk outlet at some point, all you would need to do is unplug it from the wall, move it to the new position and plug it back in. If you have any more questions please give us a call toll free at 866-222-0030