Middle Atlantic HDR-4 Horizontal Distribution Rack
Two Separate Mounting Bays & Electrical Box All In One
What's special about the HDR-4 distribution rack?
- Equipped with an upper bay that is ideal for mounting patch panels with the ability to pivot 100° and has a positive stop needed for punch down installations
- The rack supports up to 150 lbs. of equipment to support your networking needs
- Built in electric box for AC power requirements
- Click for More Features
Middle Atlantic Products' HDR-4 is an EIA compliant 19" horizontal distribution rack that is ideal for any wall mount rack installation of patch panels and other network equipment. Made proudly in the USA, this rack has two distinct bays for installation of electronic components and an integral electric box for power distribution. Middle Atlantic always ensures its products have multiple electrical cable knockouts and the HDR-4 is no exception. UL listed in the United States and Canada this vented rack with locking front door will keep your conduit safe even in unsecured locations.
| Part # | Description | Dimensions | Weight | Price |
|---|---|---|---|---|
| MA-HDR-4 | Horizontal Distribution Rack | 24"W x 36"H x 7.5"D | 60 lbs. | Manufacturer Direct |
| MA-HDR-FAN | Accessory Fan Kit | 4.5"sq. | 1.4 lbs. | Manufacturer Direct |
- Lower bay can be used to install most hubs, routers and switches with a 15 degree pivot for rear access to wiring connections
- Vented locking front door is beveled and flanged to keep your equipment secure almost anywhere
- UL 60950 listed in the USA and Canada to meet standards for Information Technology equipment
- Made of durable 16 gauge steel in a putty powder coat finish for durability and scratch resistance
- Upper rack bay is 2 rack spaces high so it can fit patch panels easily while pivoting 100°
- Lower rack bay is 2 rack spaces high to accommodate equipment 3-1/2" and pivot 15° for rear access needs for connections 18" in depth
- Sturdy EIA compliant black powder coat universally spaced rack rails are made of 11 gauge steel that are tapped with 10-32 size mounting holes
- Built in 2-gang electrical box for convenience of powering your switch equipment
- For safety, each rack has a grounding-bonding stud built into the unit
- 4" cable duct knockouts are found on the top, bottom and sides for convenient access to electrical wiring and meets the requirements for utilizing Wiremold 4000 series raceway
- 7" x 4" cable pass through on the back pan and multiple tie points for cable management
- 24" length of hook and loop fasteners are included to organize the cable connections throughout the rack
- Built in lacing bar for cable ties is found on top of the rack rail
- Lifetime Warranty from Middle Atlantic Products, an ISO 9001:2000 registered company
| Part # | MA-HDR-4 |
|---|---|
| Racking Units | 2 + patch panel(s) |
| Pivot | Upper bay: 100° Lower bay: 15° |
| Overall Width | 24" [610 mm] |
| Racking Width | 19" [483 mm] |
| Overall Height | 36" [914 mm] |
| Racking Height | Lower bay: 2U |
| Overall Depth | 7-1/2" [191 mm] |
| Racking Depth | Lower bay: 18" |
| Material | 16 gauge steel |
| Load Capacity | 150 lbs |
| Weight | 60 lbs |
| Part # | MA-HDR-FAN |
| Dimensions | 4.5"sq. |
| Weight | 1.4 lbs. |
View Enclosure GUIDE Based on Venue & Application
RELATED ARTICLES
- Racks and Enclosures Features & Benefits By: Middle Atlantic Products
- Important Details to Remember When Ordering a Cabinet
- Open Racks versus Cabinets
- Cable Management for Server Racks By: Middle Atlantic Products
HOW-TO CORNER -
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 866-222-0030
Questions & Answers
The photos of the MA-HDR-4 show a fan mounted to the cabinet. However I do not see a fan listed in the specs. Does this cabinet come with a fan and if not what is the cost of a fan for it? Thanks
- Hello, The fan is separate and is $56.04.
Do you have any questions about this product?
Let our experts and customers resolve all your doubts