What's special about these connectors and adapters?
The Gem Twist-On Connector was created, designed and manufactured to ensure a proper termination every time.
|GEM-302-4TP||GEM Plug - RG59 PVC, RG6 Plenum||10||5 oz||4.25" x 7.5"|
|GEM-302-5TP||GEM Plug - RG6 PVC||10||4.8 oz||4.25" x 7.5"|
|GEM-351-4TP||GEM Jack - RG59 PVC, RG6 Plenum||10||4.3 oz||4.25" x 7.5"|
|GEM-351-5TP||GEM Jack - RG6 PVC||10||4 oz||4.25" x 7.5"|
|GEM-301-32750TP||GEM BNC Tee Adapter Jack-Plug-Jack||10||5.5 oz||4.25" x 7.5"|
|GEM-327-3TP||GEM BNC Tee Adapter Jack-Jack-Jack||10||3.9 oz||4.25" x 7.5"|
|GEM-301-RA-350TP||GEM BNC Angle Adapter||10||4.9 oz||4.25" x 7.5"|
|GEM-301-327750TP||GEM BNC Goal Post Adapter||10||7.7 oz||4.25" x 7.5"|
|GEM-329-0TP||GEM BNC Jack to Jack Bulkhead Mount Adapter||10||3.7 oz||4.25" x 7.5"|
|GEM-327-11TP||GEM BNC Jack to Jack Adapter||10||2.6 oz||4.25" x 7.5"|
|GEM-301-301TP||GEM BNC Plug to Plug Adapter||10||5.5 oz||4.25" x 7.5"|
|GEM-301-T75TP||GEM BNC Resistor Terminator||10||3.1 oz||4.25" x 7.5"|
- Amazingly quick 15 second cable termination time using these twist on connectors
- Has a butterfly contact that will accept 18-22 AWG center conductors
- The internal thread is tapered with a specific pitch to cut into the cable jacket at a precise depth to assure a solid connection
- The Gem Twist-On Connectors are complimented with a broad array of within series adapters (listed below in features)
- One year warranty
The internal thread is tapered with a specific pitch to cut into the cable jacket at a precise depth and assure a solid hold. This connector is completely reusable and terminates within seconds making it a valuable asset to your wire connection tool and accessory selection. The fact that you can secure these with no tools means you have less to carry on your jobs for which you require 18-22 AWG connections.
|Plug||Jack||RG Cable Type||Wire Gauge||Jacket O.D.||Strip Tool|
|302-4TP||351-4TP||RG59 PVC, RG6 Plenum||18-22 AWG||0.220-0.250||GST-1|
|302-5TP||351-5TP||RG6 PVC||18 AWG||0.270-0.286||GST-1|
TWIST-ON PROCEDURE FOR BNC, TNC, AND F CONNECTORS -
|1. Trim cable as shown using strip tool P/N GST-1. Trim center conductor end at 45° angle.|
|2. Push connector onto cable while twisting in clockwise direction. Continue until connector will go no further.|
|3. Using open ended wrench on hex body, twist connector an additional 3 turns.|
RELATED ARTICLES -
HOW-TO CORNER -
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 866-222-0030
Questions & Answers
Do you have any questions about this product?
Let our experts and customers resolve all your doubts