Signamax 24-Port 100/1000 Managed Layer 2+ SFP Switch Plus

Modern capabilities at a fraction of the cost


What's special about this managed switch?

  • Non-blocking performance for 24 10/100/1000BaseT/TX Ports.
  • 4 of the ports are shared as 100/1000Base SFP Dual Media Ports.
  • 4 1000Base/10GB SFP+ only ports use auto SFP modules for fiber optic.
  • Modern capabilities including SSH and full SNMP management at a modest price.
  • Click for More Features
  • CE Certification FCC Certification

Signamax 24-port 10/100/1000 Managed Layer 2+ Switch provides non-blocking performance for 24 10/100/1000BaseT/TX Ports, 4 are shared as 100/1000Base SFP Dual Media Ports, additionally 4 1000Base/10GB SFP+ only ports. The 4 SFP+ slots can take auto-detected SFP modules for fiber optic switch interconnection at extended distances. A must have switch for modern networking needs.

Part # Description Price
SX-065-7880 Signamax 24-Port 10/100/1000BaseT/TX Managed Layer 2+ Switch plus 4-1000Base/10GbE SFP+ only Ports
  • Dual speed SFP+ ports for 10GbE Ethernet or Gigabit Ethernet fiber connectivity.
  • IEEE 802.3az Energy Efficient Ethernet standard supported.
  • Supports port-based VLAN and IEEE 802.1Q VLAN Tagging and GVRP
  • IPv6 and s-Flow support
  • IEEE 802.1p QoS with four priority queues
  • Easy-Port-Configuration for ease of setup in the IP phone, IP camera, or wireless environments.
  • Single IP Management for up to 16 Switches
  • IEEE 802.1AB Link Layer Discovery Protocol and Media Endpoint Discovery standard supported.
  • Supports RSTP/MSTP/STP for Ethernet Redundancy
  • IP multicast filtering through IGMP snooping V1, V2 & V3
  • Property Value
    IEEE 802.3u 100BaseTX
    IEEE 802.3ab 1000BaseT
    IEEE 802.3z 1000BaseSX/LX
    IEEE 802.3ae 10GbE over fiber
    IEEE 802.1p Priority (Quality of Service [QoS])
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1D Spanning Tree Protocol compatible
    IEEE 802.1Q Tagged VLAN with GVRP
    IEEE 802.3x Flow Control
    IEEE 802.1x Access Control
    IEEE 802.3ad LACP
    PORTS 24 – RJ-45 10/100/1000BaseT/TX Auto-Negotiation, Auto-MDI/MDIX ports, plus
    4 –1000Base/10 GbE SFP+ only ports
    Multicast/Broadcast/Unknown-Unicast Storm suppression enabled.
    Per Port: Copper: Status (Link/Activity),10/100/1000M; SFP Port: Status (Link/Activity/SPD), 100/1000M; SFP+ Port: Status (Link/Activity/SPD), 1000M/10GbE
    PERFORMANCE Latency: <4.5 μs (LIFO).
    Throughput, per switch: 95.232 Mpps
    Switch Fabric Speed: 128 Gbps (non-blocking, wire speed performance)
    MAC Address Capacity: 32K
    Jumbo Frame Support: up to 10056 bytes frame size
    Port Mirroring: Inbound and Outbound, assignable to any port
    NETWORK SECURITY Secure Socket Layer / Secure Shell (SSL/SSH)
    IEEE 802.1x access control with RADIUS and TACACS+
    Management Access Policy Control (ACL):
    Supports up to 512 entries. Drop or rate limitation based on:
    • Source and destination MAC, VLAN ID or IP address, protocol, port,
    • Differentiated services code point (DSCP) / IP precedence
    • TCP/ UDP source and destination ports
    • 802.1p priority
    • Ethernet type
    • Internet Control Message Protocol (ICMP) packets
    • TCP flag
    INTERNETWORKING PROTOCOLS SUPPORTED Link Layer Discovery Protocol and Media Endpoint Discovery: IEEE 802.1AB
    Link Aggregation Control Protocol Trunking: IEEE 802.3ad; 26 trunking groups; up to 4 ports for each group.
    GARP VLAN Registration Protocol / Generic Attribute Registration Protocol: IEEE 802.1Q with GVRP/ GARP
    Multicasting: Supports IP Multicast Filtering via IGMP Snooping V1, V2 & V3
    Spanning Tree Protocol / Rapid Spanning Tree /Multiple Spanning Tree Protocol: IEEE 802.1d/1w/1s
    Static Routing: IPv4 and IPv6 Unicast Static Routing
    IEEE 802.1Q Tag-based VLAN; up to 4,096 active VLANs possible
    Q-in-Q VLAN supported, to efficiently enable Subscriber Aggregation
    Private VLAN Edge; Voice VLAN
    QoS CAPABILITIES Supports Layer 4 TCP/UDP port and ToS classification
    Supports 802.1p QoS with eight hardware queues
    Supports Strict Priority and Weighted Round Robin (WRR)
    Supports priority in a Q-in-Q tag for Bandwidth Control
    •Port based
    •802.1p VLAN priority based
    •IPv4/IPv6 precedence / DSCP based
    •Differentiated Services (DiffServ)
    •Classification and re-marking ACLs
    Supports bandwidth rating per port
    •Ingress policer
    •Egress shaping and rate control
    MANAGEMENT Access Methods: Console port access via RS-232C/RJ-45 local console serial port (cable included with switch), SSH/SSL, Telnet, SNMP, or HTTP.
    Software Upgrade Capability: Via HTTP, TFTP in-band, Console out-of-band
    SNMP v1, v2c, and v3 Network Management
    RFC 1213 MIB (MIB-II)
    RFC 1757 RMON MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ethernet MIB
    Enterprise MIB
    Other Management:
    • DHCP Client/ DHCPv6 Client
    • Cable Diagnostics
    • Ping
    • Syslog
    • Telnet Client
    • IPv6 Management
    ELECTRICAL CHARACTERISTICS AC Input Range: 100 – 240 V AC, 50/60 Hz internal universal power supply
    ENVIRONMENTAL REQUIREMENT Operating Temperature: 32°F to 113°F (0°C to 45°C)
    Storage Temperature: -4°F to 158°F (-20°C to 70°C)
    Operating Humidity: 10 to 90% (non-condensing)
    Altitude: 10,000 feet or less (3,000 meters or less)
    PHYSICAL CHARACTERISTICS Dimensions: 17.4” W x 8.1” D x 1.73” H (442 mm x 211 mm x 44 mm)
    Housing: Metal case. 19 in rack mounting hardware included.
    Weight: 5.3 lb (2.4 kg)
    WARRANTY Five years, including power supply


    Related Articles


    How-To Corner


    Request A Quote

    Did you know that we can give you a quote for most of our products, including shipping?

    You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)

    Questions & Answers

    Do you have any questions about this product?
    Let our experts and customers resolve all your doubts