MCG-402A Super Duster Plus Spray
Keep Your Equipment Free From Dust and Debris With This Ozone Safe Spray
What's special about this duster spray?
- A perfect solution to cleaning out connectors, outlets, jacks or tools when dust settles from job sites.
- Removes lint, dust and microscopic foreign particles quickly and easily.
- Zero residue leaves nothing behind, just a clean finish.
- Variable valve allows greater user control.
- Ozone safe spray is environmentally sound, and the ability to use a refill leaves less waste.
- Click for More Features
MG Chemical's 402A Super Duster 134a is ideal for removing microscopic dust, lint, and foreign particles from your computer, AV Equipment, printers, fax machines and any other equipment. This duster spray has the ability to get into hard to reach crevices and will leave behind zero residue.
Ships in 1 week if the products are not in stock
|MGC-402A-285||402A-285G Super Duster 134 Plus 285g (10oz)||1.001 lbs||
|Weight :||285 : 10oz (1 lb)|
|Physical and Chemical Properties|
|Physical State :||Aerosol|
|Evaporation Rate :||1 (ether = 1)|
|Boiling Point :||-26.2°C|
|Specific Gravity :||1.22|
|Vapor Pressure :||86 PSI @ 21°C|
|Vapor Density :||3.5 (Air = 1)|
|Environmental Impact Data : (percentage by weight)|
|Stability and Reactivity|
|Stability :||Stable at normal temperatures and pressures. Do not mix with oxygen or air above atmospheric pressure. Any source of high temperature, such as lit cigarettes, flames, or welding may yield toxic and/or corrosive decomposition products|
|Conditions to Avoid :||Temperatures over 40°C, ignition sources, and incompatible materials|
|Incompatibilities :||Alkali and alkaline earth metals, powdered aluminum, zinc, magnesium, and beryllium|
|Polymerization :||Will not occur|
|Decomposition :||Halogens, halogen acids, possibly carbonyl halides|
|Routes of Entry :||Eyes, ingestion, inhalation, and skin|
|Ventilation :||Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure limits|
|Personal Protection :||Wear appropriate eyeglasses or chemical safety goggles. Wear Appropriate protective clothing to prevent skin contact. Use a NIOSH approved respirator when necessary|
|Fire Fighting Measures|
|Auto-ignition Temperature :||> 750°C|
|Extinguishing Media :||Use water spray, dry chemical, carbon dioxide, or chemical foam|
|General information :||This material may become flammable when mixed with air under pressure and exposed to strong ignition sources. Containers may explode in the heat of a fire|
|WHMIS Codes :||A|
|NFPA Ratings :||Health 1, Flammability 0, Reactivity 0|
|HMIS Rating :||Health 1, Flammability 0, Reactivity 0|
|Eyes :||Contact with eye may cause severe tissue damage because of frostbite|
|Skin :||Contact with liquid or escaping vapor can cause frostbite, indicating by pallor or redness, loss of sensation, and swelling|
|Inhalation :||Deliberate Inhalation of high concentrations of vapor should be avoided, as it is harmful. Deliberate inhalation, may result in cardiac symptoms, unconsciousness or death. This product is not recommended for intentional misuse or deliberate inhalation as death without warning may occur. Low in toxicity in concentrations up to 40000ppm. When oxygen levels in air are reduced to 12% - 14%, symptoms of asphyxiation will occur: loss of coordination, increased pulse rate, and deeper respiration|
|Ingestion :||Aspiration hazard. May cause irritation of the digestive tract|
|Chronic :||Over exposure may cause dizziness and loss of concentration. At higher levels, CNS depression and cardiac arrhythmia may result from exposure|
Request A Quote
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)
Questions & Answers
Do you have any questions about this product?
Let our experts and customers resolve all your doubts