Home Label Printers Wire Markers ZipTape Wire Markers Print-On Label Sheets Data Info

 

Product Data Sheet
Print-On Label Sheets

Back to Print-On Label Page

 

Laser Self-Laminating Printable Labels

General Description:
A clear, polyester film with an ink receptive print area coated with a permanent UV resistant pressure sensitive adhesive. It is backed with a two-side poly coated backside printable lay flat release liner. The substrate is approved for indoor/outdoor use with occasional exposure to lubricating oil and water.

Product Data
 Value Test Method
Physical Properties
Thickness
mil (micron) 		Film: 0.50 ± 10% ASTM D 3652
Adhesive 1.0-1.1 ± 0.1
Liner: 5.8 ± 10%
Dimensional Stability (%) No shrinkage observed on Aluminum panel @ 160° F for 24 hr
 
Adhesion Properties
Adhesion from Average
oz/in (N/m) 		Expected Range
oz/in (N/m) 		 
Stainless Steel 46 (506) 30-60 (330-66) PSTC 1 (Modified for 72 hr dwell time)
Acrylic 37 (407) 25-55 (275-605)
Glass 43 (473) 30-60 (330-660)
Expected Shear
(hours) 		25   PSTC 7 (1 hr dwell, 1 sq. in, 4 lb load)
Tack (gm/sq cm) 330 150-450 ASTM D 2979
 
Expected Exterior Life
2 years
Service Temperature Range
-40° F to 302° F (-40° C to 150° C)
Minimum Application Temperature
50° F (10°C)
Storage Stability
 Two years stored at 70° F (21° C) and 50% RH

 

 

Inkjet Self-Laminating Label Sheets

General Description:
A clear polyester film with an inkjet receptive print area coated with a permanent UV resistant pressure sensitive adhesive. It is backed with a two-side poly coated backside printable lay flat release liner. The substrate is approved for indoor/outdoor use with occasional exposure to lubricating oil and water.

Product Data
 Value Test Method
Physical Properties
Thickness
mil (micron) 		Film: 1.0 ± 10% ASTM D 3652
Adhesive: 1.0-1.1 ± 0.1
Liner: 5.8 ± 10%
Dimensional Stability (%) No shrinkage observed on Aluminum panel @ 160° F for 24 hr
 
Adhesion Properties
Adhesion from Average
oz/in (N/m) 		Expected Range
oz/in (N/m) 		 
Stainless Steel 46 (506) 30-60 (330-660) PSTC 1 (Modified for 72 hr dwell time)
Acrylic 37 (407) 25-55 (275-605)
Glass 43 (473) 30-60 (330-660)
Expected shear (hours) 25   PSTC 7 (1 hr, 1 sq. in, 4 lb load)
Tack (gm/sq cm) 330 150-450 ASTM D 2979
 
Expected Exterior Life
2 years
Service Temperature Range
-40° F to 302° F (-40° C to 150° C)
Minimum Application Temperature
50° F (10°C)
Storage Stability
 Two years stored at 70° F (21° C) and 50% RH

 

 


Currency
Converter


Shop with Confidence