| PART# |
DESCRIPTION |
DIMENSIONS |
PRICE/ EACH |
 |
SRAL2400-WC |
Wire Clip- holds conductors in place in raceway(non-metallic) |
- |
|
 |
SRAL2401 |
Coupling- for joining lengths of raceway |
3" L x 1-3/4" W |
|
 |
SRAL2406 |
Cover Clip-for covering joints where base or cover adjoin |
1" |
|
 |
SRAL2409 |
Ground Clamp- for UL grounding properties |
3" x 1-3/4" |
|
 |
SRAL2410-B2 |
End Fitting- use with 1/2" hub adapter |
2" x 1-1/4" |
|
 |
SRAL2410-B |
Blank End- for putting a clean end on lengths of raceway |
2" x 1-1/4" |
|
 |
SRAL2451 |
Box Adapter- for feeding raceway from an existing wall outlet |
4-1/2" L x 4-1/2" W |
|
 |
SRAL2411 |
90 Degree Flat Elbow for right angle turn on the same surface |
A
4" |
B
4" |
C
2" |
|
 |
SRAL2415 |
Tee- for branch connection of 2 runs of raceway |
A
4" |
B
6" |
C
2" |
|
 |
SRAL2416 |
Cross- for cross connection of 2 runs of raceway |
6" x 6" x 2" |
|
 |
SRAL2417 |
Internal Elbow- for bending around internal corners |
A
4" |
|
 |
SRAL2418 |
External Elbow- for bending around external corners |
A
3" |
B
5" |
|
 |
SRAL2446P-D |
Duplex Receptacle Cover Plate - for use in hanging fixtures |
6" L |
|
1-Piece Latching Raceways From $5.90 ea.
Non metallic wiring management systems such as cable raceways are a functional, affordable, attractive solution for wire enclosure applications in commercial, industrial as well as residential environments. |
2-Piece Flex Tab Raceways
From $8.75 ea
The 2-Piece Flex Tab Raceway consists of two pieces, a co-extruded base with 2 flexible tabs and snap cover, that allow for easy installation and removal of wires. Pieces are made of UL V0-94 compliant flame resistant PVC and includes pre-applied foam tape for easy and fast installation. |
Accessories
From $1.75 ea
One piece latching raceway accessories complement the straight sections of your choice. Use them to finish off and give your set-up a clean and finished look. |
Pan-Way® Surface Raceways from Panduit
Price $16.56
Panduit Pan-Way® non-metallic wiring management systems such as cable raceways are a functional, affordable, attractive solution for wire enclosure applications in commercial, industrial as well as residential environments. |
Wiremold 1 Piece Raceways
From $6.75 ea.
Routes and protects unshielded twisted pair, shielded twisted pair, coaxial, fiber optic, and other low-voltage (50V or less) cables. |
Wiremold Aluminum Surface Raceways
From $17.98
The anodized 0.060" aluminum channel is suitable for both low voltage and power cords. They conceal and protect your power and data cables, yet allow you to attach prewired receptacles for your convenience. |
Wire Channel & Accessories
From $2.60
The Wire Channel is a rectangular raceway made of a RU rated, self-extinguishing PVC. Each 60" section of wire channel is lined along the back with adhesive tape to make installation quick and easy. Accessories also available. |
Wire Management Kit
Price: $19.99
This kit offers a complete system for your home application to hold, guide, and protect wires up to 300 Volts. It includes 3 Channels and a variety of accessories made of UL 94-VO compliant, flame resistant PVC. Comes with pre-applied self-adhesive tape. |
Wire Guards
From $7.29
Wire Guards are low cost, light weight plastic moldings, extruded in rigid HIGH-IMPACT PVC. They provide a means of concealing and protecting electrical wiring. |
Cable Tunnel Organizer
Price $9.95
The Cable Tunnel Organizer is a great way to hide cords and connectors under your desk or along a wall. Open the cover, route your cords through the cable tunnel and close to conceal the mess. |
Wire Duct
From: $125.50
Cableorganizer.com Wiring Duct provides a convenient, safe way to channel wire or cable. |
|