Wire Trak™ Raceway Roll

Comments about 375 Series Raceway on a Roll 50 ft - White:

Edges look better if cut with a fine sharp saw

Comments about 375 Series Raceway on a Roll 50 ft - White:

Just installed it today, and I was pleasantly surprised at how easy it was and how good it looks. The raceway comes out of the box pre-shaped, and the bottom latches are secure. I placed it right against the ceiling, and it was still easy to latch. The only major test will be whether the adhesive lasts for the years to come.

Comments about 375 Series Raceway on a Roll 50 ft - White:

Easiest way to cut is with a small hacksaw (edges need work) or with tin snips (harder, but cleaner edges).

Comments about 375 Series Raceway on a Roll 50 ft - White:

Used this to run speaker cable to my surround channels in the back of the room. Really convenient to pull out and cut exactly what I needed for each segment. Cut easily and fairly cleanly with a hack saw. Only problem was that since it's rolled up, the longer pieces come out with some sideways bend to them, so you have to be extra careful to keep it straight when you stick it to the wall. Sticks securely and looks great with the matching connectors in the corners, bends, and junctions.

Comments about 375 Series Raceway on a Roll 50 ft - White:

I like how this thing is rolled up in a box. Doesn't take up much room and comes out easily and forms itself. This is an affordable cable runner organization.

Comments about 375 Series Raceway on a Roll 50 ft - White:

Used to cover wire

Comments about 375 Series Raceway on a Roll 50 ft - White:

The people at CableOrganizer.com steered me to this product when I was planning a DIY home theater install. It allowed me to create a seamless and customizable cable run for all of my speaker wires. The accessories were a snap and I now have a professional looking install that was as easy as measure, cut, and peel the tape back.

Comments about 375 Series Raceway on a Roll 50 ft - White:

We installed track lighting in a room where wiring through the ceiling was not feasible. We could only find wiremold kits in stores with 5-foot pieces, not long enough for our situation! The Raceway on a Roll allowed us to neatly and seamlessly cover the wire, and we painted it to match the ceiling and wall. The adhesive strip is holding tight, even over a slightly textured plaster. There is plenty left for another project, and it stores neatly in the box it shipped in.