Home > Cable Raceways Wire Management Systems > Cable Raceways > WireTracksŪ - Baseboard Molding Wiring Channel System > WireTracksŪ Technical Specification
Product Description
Interior, UL 94 V0, UL 94 5VA, Extrusion-Single Screw
Product Characteristics
| Material Status |
Commercial: Active |
| Availability |
North America |
| Test Standards Available |
ASTM |
| Features |
Flow, High Appearance, Pleasing Surface |
| Uses |
Automotive Applications
Profiles |
| Agency Ratings |
NSF 51 |
| Automotive Specifications |
GM 7001M (PVC) |
| Forms |
Cube |
| Processing Method |
Extrusion |
Properties¹
| Physical |
Nominal Values |
Test Method |
| Density - Specific Gravity |
1.39 sp gr 23/23°C |
ATM D792 |
| PVC Cell Classification |
16364 |
ASTM D1784 |
| |
| Mechanical |
Nominal Values |
Test Method |
| Tensile Modulus² |
465000 psi |
ASTM D638 |
| Tensile Strength @ Yield² |
6970 psi |
ASTM D638 |
| Flexural Modulus |
4300000 psi |
ASTM D790 |
| Flexural Strength |
|
ASTM D790 |
| |
| Impact |
Nominal Values |
Test Method |
Notched Izod
|
| (73°F, 0.125 in, Compression Molded, Flow)³ |
19.8 ft-lb/in |
ASTM D256 |
| (73°F, 0.125 in, Injection Molded)³ |
19.6 ft-lb/in |
| (73°F, 0.125 in, Compression Molded, Across Flow)³ |
15.9 ft-lb/in |
Drop Impact Resistance |
| (73°F, C.125, Procedure B) |
1.40in-lb/mil |
ASTM D4226 |
| (73°F, C.125, Procedure A) |
1.40in-lb/mil |
| |
| Hardness |
Nominal Values |
Test Method |
| Durometer Hardness (D Scale (15 sec)) |
74 |
ASTM D2240 |
| |
| Thermal |
Nominal Values |
Test Method |
| DTUL @264psi - Unannealed (0.125 in) |
164 °F |
ASTM D648 |
| CLTE, Flow |
3.3E-005 in/in/°F |
ASTM D696 |
| |
| Ignition Characteristics |
Nominal Values |
Test Method |
| Flame Rating - UL |
|
UL 94 |
| (0.0591 in, ALL) |
5VA |
|
| (0.0276 in, ALL) |
V-0 |
|
| |
|
|
| |
| Additional Properties |
Note: Automotive OEM approval(s)
Note: NSF listings are obtained on specific colors. Contact PolyOne for the latest listing of approved colors for this product.
Note: The Cell Classification was determined using the notched izod test injection molded samples.
Ease of Sizing, None: Good |
| |
| Extrusion Molding Parameters |
Nominal Values |
Test Method |
| Melt Temperature |
350 to 370 °F |
|
¹ Typical properties; not to be constructed as specifications
² Type I, 0.2 in/min
³ Method A
|
Can we improve something on this page?
Can this page be improved? Is the information complete and easy to understand? We are always looking to improve our website, so please feel free to give us your comments, suggestions, or questions. Thanks for helping us serve you better!
