Home Fire Protection Fire Stop Devices Fire Rated Troffer Covers



Tenmat Tool-less Fire Protection Troffer Covers

Maintains the Structural and Flame Protection Integrity of Fire-Rated Ceilings

fire rated troffer cover

More Images
Close Window

Tenmat Tool-less Fire Protection Troffer Covers

    Additional Images
  • 2x2 troffer cover installed - icon
  • troffer cover installed in drop-ceiling - icon
  • 2x2 Tenmat troffer cover - icon
  • 2x4 Tenmat troffer cover - icon
  • pulling a cable through troffer cover - icon

This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
Copyright ©2013 CableOrganizer.com

FF130 2x2 Cover Installed

Low Price GuaranteeWhat's special about these fixture covers?

  • Compensates for the loss of integrity that fire rated ceilings often suffer when regular fixture troffers are used
  • Stops flame spread and heat transmission for up to 60 minutes, ensuring plenty of time for personnel evacuation and fire extinguishing
  • Installs easily with no sealant, screws, or drilling; simply place the cover on top of the ceiling's support beams and install your light fixture as normal
  • Cable entry points can be cut or drilled in any desired location on the unit, ensuring proper installation and wire management
  • Click for More Features

Consistent fire protection is a very important part of multi-story facilities that house many people, and compromising integrity is never acceptable with so much at stake. These fire-rated fixture covers from Tenmat make up for the inherent losses in protection when installing light fixtures with standard troffers, and require no tools to install. Their workable yet sturdy material allows you to easily create holes for cable routing and makes them easy to fold for installing into awkward or tight spaces.

  • Lightweight, foldable construction to allows easy installation into tight or awkward spaces
  • Never needs to be cleaned, adjusted, or maintained in any way, and is easily removed and replaced for light fixture maintenance, resulting in a lower cost of operation
  • Relieves some of the stress put on the ceiling by typical drywall light fixture installations for increased structural integrity
  • Ideal for mounting fluorescent fixtures in schools, hospitals, office buildings, and other multi-story facilities

 

Part # TEN-FF130-2x2 TEN-FF130-2x4
Price
Qty:  
Qty:  
Dimensions (overall) 5" H x 27" W x 29" L
[12,7 x 68,58 x 73,66 cm]		 5" H x 28" W x 52" L
[12,7 x 71,12 x 132,08 cm]
Thickness 0.39-0.59" [10-15 mm] 0.39-0.59" [10-15 mm]
Weight 7 lbs [3,17 kg] 10 lbs [4,53 kg]
Material Mineral Wool Mineral Wool
Industry Standards Chilitern Laboratory 1 hour fire rating
Fire Tested to BS 476 Part 23 1987		 Chilitern Laboratory 1 hour fire rating
Fire Tested to BS 476 Part 23 1987

NOTE: All items have a 30% restock fee and are accepted ONLY within 30 days of purchase

PART # DESCRIPTION DIMENSIONS WEIGHT PRICE
TEN-FF130-2x2 Tenmat Troffer Cover - 2ft x 2ft 5" H x 27" W x 29" L
[12,7 x 68,58 x 73,66 cm]		 7 lbs [3,17 kg]
Qty:  
TEN-FF130-2x4 Tenmat Troffer Cover - 2ft x 4ft 5" H x 28" W x 52" L
[12,7 x 71,12 x 132,08 cm]		 10 lbs [4,53 kg]
Qty:  
firestop grommetSTI Ready® Firestop Grommet
Price $26.25
Perfect for firestopping single-cable penetrations without messy caulks and foams, these plenum-rated intumescent grommets simply snap around the cable, and then plug into the hole in your wall.		 fire stop puttyNelson FSP™ Firestop Putty
From $9.69
Ready to use right out of the box, this hand-moldable putty provides 3 hours of firestopping for pipe, cable, and ductwork penetrations, and can be reworked at anytime.
 
STI Series FP Intumescent Firestop PlugsSTI Series FP Intumescent Firestop Plugs
From $30.57
Ideal for sealing cable penetrations, conduit and blank openings against the spread of fire and smoke, these intumescent plugs expand to 10 times their original size when exposed to high heat and flame.		 Firestop Sleeve KitsSTI Split Firestop Sleeve Kits
From $91.79
Ready™ Split Sleeves are designed with a split pathway and come with wall plates which allow them to be implemented around existing cable bundles.

Shop with Confidence