Home Power & Data Distribution Surge Protectors and Suppressors Industrial Surge Suppressors Medical Series UPS
Tripp Lite Full Isolation Medical Grade Series UPS Systems
Reliable Power Source for Hospitals and Health Care Facilities
Close Window
Tripp Lite Medical Grade UPS Systems
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player |
These medical grade UPS systems can eliminate disruptions and damage to sensitive equipment and make your power sources more reliable. |
OmniSmart Full Isolation UPS Systems are ideal for medical applications, and allow you to install a single battery backup solution to provide all the benefits of a dedicated AC input line without the expense and inconvenience of running special circuits and upgrading site wiring.
- Built in communication ports
- Includes (4) high quality protected hospital-grade outlets and a 6' cord
- Extended runtime capability on select models
- Full-isolation UPS system is a key feature when dealing with sensitive equipment and operations
- Consistent battery power will keep systems up and running through short blackouts, and give you time to safely shut down during longer ones
- Each AC outlet prevents damage from lightning and surges
- Low 100µA leakage of current from connected healthcare equipment
- Each of these models feature a hospital-grade plug and receptacles designed for use both inside and outside of patient-care areas
- Resistant to electrostatic discharge
- Equipped with battery replacement door and back panel grounding lug
- Provides surge protection, line isolation and EMI/RFI noise filtering
- Complete remote monitoring cabling included
- PowerAlert UPS management software available via free download
- 2-year manufacturer's warranty
Applications:
- Patient point-of-care solutions
- Tele-medicine
- Nurse's stations
- Wireless communications systems
- Electronic prescribing applications
- Medical imaging
- Mission critical equipment
*Not recommended for life support applications
OMNISMART350HG Omni Smart UPS System
- Supports loads up to 330VA/225W and maintains sine-wave 120V nominal output over an input range of 83 to 132V
- Input: Hospital-grade NEMA 5-15P (120V 15A)
- Output: 4 Hospital-grade NEMA 5-15R (120V)
- 2-line phone suppression for TEL/DSL line protection
- 46 minutes half load runtime (with 165VA load)
- 18 minutes full load runtime (with 330VA load)
- (1) DB9 serial port for network interface
- (4) diagnostic LEDs
- AC present
- On battery
- Voltage correction
- Battery low/replace
- Serial cable for remote monitoring, warranty information, and instruction manual included
SMART700HG SmartPro UPS System
- Supports loads up to 700VA/450 watts and maintains 120V nominal output over an input range of 82 to 142V
- Input: NEMA 5-15P (120V 15A)
- Output: 4 NEMA 5-15R (120V)
- Line-interactive voltage regulation corrects brownouts and over voltages from 81 to 143 volts back to usable 120V output levels, without using battery power
- 42 minutes half load runtime (with 350VA load)
- 18 minutes full load runtime (with 700VA load)
- 5 diagnostic LEDs
- AC present
- On battery
- Voltage correction
- Overload
- Battery low/replace
- (1) USB and (1) DB9 monitoring cable, warranty information, and instruction manual included
SMART1200XLHG SmartPro XL Medical Grade UPS System
- Supports loads up to 1000VA/750W and maintains 120V nominal output over an input range of 82 to 142V
- Input: Hospital-grade NEMA 5-15P (120V 15A)
- Output: 4 Hospital-grade NEMA 5-15R (120V)
- Expandable runtime is available with the addition of one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible)
- 28 min. half-load runtime (500VA/375W)
- 10 min. full load runtime (1000VA/750W)
- Equipped with USB and DB9 communication ports
- 5 diagnostic LEDs
- AC present
- On battery
- Voltage correction
- Overload
- Battery low/replace
- PowerAlert Software and cabling, warranty information, and instruction manual included
| Estimated Runtime - Loads in Watts | |||||||||||||||||
| UPS | 20W | 40W | 60W | 80W | 100W | 120W | 140W | 160W | 180W | 200W | 260W | 300W | 340W | 400W | 500W | 600W | 700W |
| TL-OMNISMART350HG | 178 | 109 | 76 | 58 | 46 | 42 | 32 | 27 | 24 | 21 | - | - | - | - | - | - | - |
| TL-SMART700HG | 347 | 218 | 155 | 119 | 95 | - | 66 | - | - | 44 | 31 | 26 | 22 | 19 | - | - | - |
| TL-SMART1200XLHG | 505 | 305 | 214 | 162 | 129 | - | - | - | - | 60 | - | 37 | - | 25 | 19 | 15 | 12 |
All runtime values are in minutes |
|||||||||||||||||
| TL-OMNISMART350HG | TL-SMART700HG | TL-SMART1200XLHG | |
| Price | |||
| SYSTEM OVERVIEW | |||
| Voltage compatibility: | 120VAC | 120VAC | 120VAC |
| Frequency compatibility: | 60 Hz | 60 Hz | 60 Hz |
| OUTPUT | |||
| Output VA: | 330 | 700 | 1000 |
| Output watts: | 225 | 450 | 750 |
| Output nominal voltage: | 120VAC | 120VAC | 120VAC |
| Line Mode Output voltage regulation: | Sine wave line voltage 120V (-18%/8%) | Sine wave line voltage 120V (-18%/8%) | Sine wave line voltage 120V (-18%/8%) |
| Battery Mode Output voltage regulation: | PWM sine wave output 120V ±5% | - | PWM sine wave output 115V ±5% |
| Line Mode Output frequency regulation: | Passes line frequency of 60Hz. ±10% | Passes line frequency of 60Hz ±10% | Passes line frequency of 60Hz ±10% |
| Battery Mode Output frequency regulation: | Inverter output regulated to 60Hz ±0.5Hz | - | Inverter output regulated to 60Hz ±0.5Hz |
| Outlet quantity/type: | 4 NEMA 5-15R-HG Hospital-Grade | 4 NEMA 5-15R-HG Hospital-Grade | 4 NEMA 5-15R-HG Hospital-Grade |
| INPUT | |||
| Overload Protection: | Resettable circuit breaker | Resettable circuit breaker | - |
| Maximum input amps: | 2.3A/250W | 5.5A/550W | 9.2A/860W |
| Input connection type: | NEMA 5-15P-HG Hospital-Grade | NEMA 5-15P-HG Hospital-Grade | NEMA 5-15P-HG Hospital-Grade |
| Input cord length: | 6' 14 gauge | 6' 14 gauge | 6' 14 gauge |
| Recommended electrical service: | 15A 120V | 15A 120V | 15A 120V |
| BATTERY | |||
| Full load runtime: | 18 minutes (330VA) | 18 minutes (700VA) | 10 min. (1000VA) |
| Half load runtime: | 46 minutes (165VA) | 42 minutes (350VA) | 28 min. (500VA) |
| DC system voltage: | 12VDC | 36VDC | 36VDC |
| Typical battery lifespan: | 3-6 years, depending on usage | 3-6 years, depending on usage | 3-6 years, depending on usage |
| Battery recharge rate: | 2-4 hours to 90% | 2-4 hours to 90% | 2-4 hours to 90% |
| Replacement battery cartridge: | RBC52 (quantity 2) | - | - |
| VOLTAGE REGULATION | |||
| Voltage regulation description: | 1 boost level of brownout correction to maintain usable, computer grade output. | 2 boost levels of brownout correction and a single level of over voltage adjustment to maintain usable, computer grade output without consuming battery power over an input voltage range of 81 to 143VAC | 2 boost levels of brownout correction and a single level of over voltage adjustment to maintain usable, computer grade output without consuming battery power over an input voltage range of 81 to 143VAC |
| Over voltage correction: | Input voltages between 126 and 143VAC are reduced by 9% | Input voltages between 126 and 143VAC are reduced by 9% | - |
| Direct pass through: | Input voltages between 108 and 147VAC are passed through unchanged | Input voltages between 105 and 125VAC are passed through unchanged | Input voltages between 105 and 125VAC are passed through unchanged |
| Brownout correction: | Input voltages between 83 and 107VAC are boosted by 14% | Input voltages between 96 and 106VAC are boosted by 10% | Input voltages between 96 and 106VAC are boosted by 10% |
| Severe brownout correction: | Input voltages between 81 and 95VAC are boosted by 21% | Input voltages between 81 and 95VAC are boosted by 21% | - |
| LEDS ALARMS & SWITCHES | |||
| Front panel LEDs: | 4 status indicator LEDs: - Line power - Battery power - Voltage regulation and - Battery low/replace status |
5 indicator LEDs: - Battery charge level - AC line voltage levels - Automatic voltage regulation status - UPS load level - Replace battery warning |
5 indicator LEDs: - Battery charge level - AC line voltage levels - Automatic voltage regulation status - UPS load level - Replace battery warning |
| Alarms - assuming full load: | Indicates power failure, silenceable via alarm cancel switch. Once cancelled, alarm will resume when approximately 2 minutes of battery operation remain (assuming full load) | 3 function audible alarm indicates: |
3 function audible alarm indicates: - Power failure conditions (4 beeps/10 sec) - Overload (continuous beeps) - Low battery (continuous tone) |
| Front panel switches: | -
System enable |
-
System enable - Self-test - Cancel Alarm |
-
System enable - Self-test - Cancel Alarm |
| SURGE/NOISE SUPPRESSION | |||
| AC surge suppression: | 480 joules | 480 joules | 480 joules |
| AC suppression response time: | Instantaneous | Instantaneous | Instantaneous |
| Dataline suppression: | (2) Line Tel/DSL | ||
| EMI/RFI AC noise suppression: | Yes | Yes | Yes |
| PHYSICAL | |||
| Shipping weight: | 26.5 lbs. (12 kg) | 48 lbs. (21.8 kg) | 49.2 lbs. (22.4 kg) |
| Unit weight: | 25 lbs. (11.4 kg) | 44.6 lbs. (20.2 kg) | 45.2 lbs. (20.5 kg) |
| Unit Dimensions: | 10.75"H x 5.25"W x 7.25"D (27.3 x 13.3 x 18.4 cm) |
12.75"H x 7.5"W x 9"D (32.4 x 19.1 x 22.9 cm) |
18.25"H x 11.75"W x 13.5"D (46.4 x 29.8 x 34.3 cm) |
| Material of construction: | PVC | PVC | PVC |
| Form factors supported: | Tower | Tower | Tower |
| Cooling method: | Convection | Cooling via rear-exit cooling fan | Cooling via rear-exit fan |
| Battery Access: | Battery access door allows hot swap battery replacement without powering connected equipment off | Battery access door allows hot swap battery replacement without powering connected equipment off | Battery access door allows hot swap battery replacement without powering connected equipment off |
| ENVIRONMENTAL | |||
| Operating Temperature: | 32°F to 104°F (0° to 40°C) | 32°F to 104°F (0° to 40°C) | 32°F to 104°F (0° to 40°C) |
| Storage Temperature: | 5°F to 122°F (-15°C to 50°C) | 5°F to 122°F (-15°C to 50°C) | 5°F to 122°F (-15°C to 50°C) |
| Relative Humidity: | 0 to 95%, non-condensing | 0 to 95%, non-condensing | 0 to 95%, non-condensing |
| COMMUNICATIONS | |||
| Network monitoring port: | DB9 | (1) USB and (1) RS232 | (1) USB and (1) DB9 |
| Cabling included: | (1) DB9 cable | (1) USB to USB, (1) DB9 to DB9 | (1) USB to USB, (1) DB9 to DB9 |
| Software: | PowerAlert download | PowerAlert download | PowerAlert |
| LINE/BATTERY TRANSFER | |||
| Transfer time from line power to battery mode: | 2 to 4 milliseconds | 2 to 4 milliseconds | 2 to 4 milliseconds |
| Low voltage transfer to battery power: | 83V (resets to line power as voltage increases to 87V) | 81V (resets to line power as voltage increases to 85V) | 81V (resets to line power as voltage increases to 85V) |
| High voltage transfer to battery power: | 147V (resets to line power as voltage decreases to 143V) | 143V (resets to line power as voltage decreases to 139V) | 143V (resets to line power as voltage decreases to 139V) |
| SPECIAL FEATURES | |||
| Cold Start: | Inverter can be cold started to enable temporary AC output during a power failure | Inverter can be cold started to enable temporary AC output during a power failure | Inverter can be cold started to enable temporary AC output during a power failure |
| Appearance: | Gray tower | Gray tower | Gray tower |
| CERTIFICATIONS | |||
| Certifications: | Tested to UL1778 (USA, Series AGOM350KSR57HG), UL60601-1 (Medical), cUL (Canada), Class B (emissions), FCC Part 68 Industry of Canada (telecommunications) | Tested to UL1778 (USA, Series AGSM700PSR3HG), UL60601-1 (Medical), cUL (Canada), FCC Class A (emissions) | Tested to UL1778 (USA, Series AGSM1200PSR3HG), UL 60601-1 (Medical), cUL (Canada), FCC Class A (Emissions) |
| WARRANTY | |||
| Manufacturer's product warranty: | 2-year | 2-year | 2-year |
| Optional coverage: | 3-year, 5-year, next day and on-site warranty coverage available | 3-year, 5-year, next day and on-site warranty coverage available in many areas; contact Tripp Lite | 3-year, 5-year, next day and on-site warranty coverage available in many areas; contact Tripp Lite |
| PART # | DESCRIPTION* | VOLTS | FULL LOAD RUNTIME | DIMENSIONS | WEIGHT | PRICE |
| TL-OMNISMART350HG | Omni Smart UPS System |
330 | 18 min. | 10.75"H x 5.25"W x 7.25"D | 26.5 lbs. | |
| TL-SMART700HG | SmartPro UPS System |
700 | 18 min. | 12.75"H x 7.5"W x 9"D | 48 lbs. | |
| TL-SMART1200XLHG | SmartPro XL Medical Grade UPS System |
1000 | 10 min. | 18.25"H x 11.75"W x 13.5"D | 49.2 lbs. |
*Not recommended for life support applications
MANUALS -
RELATED ARTICLES
- How to Boost Office Efficiency
- 10 Easy Ways to Prevent Electrical Hazards
- What is a Surge Suppressor?
- What is a UPS?
|
|
|
|
Tripp Lite BC Professional UPS
Tripp Lite Commercial Grade OmniSmart UPS Systems
Cord Caddy™ Medical Cord
Facebook Comments