Home > Test Equipment > Network Cable Tester > Pairmaster LAN Cable Test Set and Kit
Pairmaster LAN Cable Test Set and Kit
Pairmaster LAN Cable Test Set and Kit
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player |
What's special about these LAN cable test sets and kits?
The PairMaster gives its user the ability to verify and test basic LAN cabling installations. This unique Cable Test Set can identify one of up to 16 cable pairs with the press of a button. The PairMaster will also check for 8 faults including Near End Crosstalk (NEXT) for double split pairs, over-voltage, open pair, shorted pair, crossed pair, split pair, reversed pair, and transposed pair. |
- Input protection up to 56VDC
- Overvoltage indication on PairMaster and Remote Identifiers
- Low battery indication
- Auto Power Off at end of test
- 4 Pass LEDs (green), 4 Fail LEDs (red)
- EIA / TIA 568 configuration for UTP ethernet and token ring LAN cables
- The PairMaster Set includes 2 remote identifiers (#1 and #2), 1 RJ-45 Cat5 patch cable, 2 RJ-45 in-line couplers, 1 9V battery and instruction manual
- The PairMaster Kit includes 1 PairMaster LAN Test Set, 16 remote identifiers (#1 - #16), 1 RJ-45 Cat5 patch cable, 2 RJ-45 in-line couplers, 1 9V battery, 1 hard-sided carrying case with strap, and instruction manual
- 2-year manufacturer warranty on PairMaster
- 1-year manufacturer warranty on Remote Identifiers
| Functions: | |
| Wire Mapping | The PairMaster will check the point to point wiring, commonly referred to as wire-mapping. This tells the user whether or not the cable pairs are wired correctly at both ends. Green LEDs indicate Pass, red LEDs indicate Fail. If a fault is detected, the corresponding fault code is displayed on the large 2-digit, 7-segment LEDs. |
|---|---|
| Near End Crosstalk (NEXT) | The Near End Crosstalk feature checks for excessive A.C. coupling between each pair in a cable. |
| Cable Identification | The PairMaster can also identify a LAN cable within a bundle. By connecting up to 16 available Remote Identifiers to the workstation wall jacks, the PairMaster will identify and display the number of the Remote Identifier connected to the cable. The user can then easily document the network topology. |
| Overload Protection | The PairMaster has built-in over-voltage protection. When voltage from a central office battery is detected, the unit will flash (OL) and shut itself down. |
| Remote Identifier | The Remote Identifier is a small unit used in conjunction with the PairMaster for LAN cable identification. The Remote Identifier properly terminates the LAN cable when connected to the workstation wall jacks. It contains the necessary circuitry to allow the PairMaster to verify proper wiring within the cable. Each of the 16 Remote Identifiers has an overvoltage LED which lights up to indicate the presence of damaging voltage. |
| Specifications: | |
| INPUT PROTECTION | Withstands 56VDC limited by400 ohms series resistance for up to 2 mn. Withstands 175V peak 20 - 60 Hz with ohms series impedance superimposed onto 56 VDC for 100mS. (Stabdard Telco Signals) |
| OVER-VOLTAGE INDICATION | Range: 43 - 56V battery Voltage: 400 - 1870 ohms series resistance PairMaster: flashing "OL" Remote ID: LED lights up |
| POWER SUPPLY | PairMaster: 9V Alkaline battery Battery life: approx. 500 tests Remote ID: passive - no battery required |
| MAX. CABLE LENGTH | 400 ft / 122 Meters |
| PART # | DESCRIPTION | DIMENSIONS | WEIGHT | PRICE |
| TR-3240 | PairMater LAN Cable Test Set | 9.5" x 10-1/2" x 1-3/4" | 1 lb | |
| TR-3241 | PairMater LAN Cable Test Kit | 10" x 6-1/2" x 4-1/2" | 3.2 lbs | |
| Accessories | ||||
| TR-10-4275 | Universal Carrying Case | 7-1/2" H x 6" W x 1-1/2" D | 0.25 lb | |
| TR-10-4250 | LAN TDR case | n/a | n/a | |
RELATED ARTICLES -
HOW-TO CORNER -
- How to Remotely Test RJ45 Terminated Cables
- How to Terminate with an RJ45 Connector
- How to Test an RJ45 Connection
 Wiremaster XR-2 LAN Test SetFrom $95.95 The WireMaster XR-2 is the perfect test set for verifying the continuity of 2,3, or 4 pair UTP (Unshielded Twisted Pair) cables terminated in RJ-11 or RJ-45 modular connectors (such as LAN cables or telephone cables). In the Remote mode (when only the Receiver is visible to the user), installed "straight through" and "reverse wired" cables can be identified and their continuity verified. |
 Wiremaster XR-5 Network Cable TesterFrom $122.78 The WireMaster XR-5 datacom tester can test patch cables or installed wiring with the detachable remote. It has a portable handheld ergonomic design and checks for continuity, miss-wiring, opens, shorts, crossover and grounding. This tester includes BNC terminator, BNC, RJ-11 and RJ-45 jumper cables. Tests 5 types of cables: RJ-11, RJ-45, BNC, 1394, USB |
 9320 Clamp-On Digital MeterFrom $107.02 This AC/DC clamp-On meter is tested to IEC 1010 category III 600V. Clamp fits 1 - 750 MCM or 2 - 350 MCM cables. Rugged - designed to MIL-T-28800 for a Class II instrument. |
|
