J Channel Raceway

A Great Way to Clean-up Home & Office Wires


Qty:  

What's special about this cable manager?

  • No tools needed for installation.
  • Open channel design allows easy access for adding or removing cables.
  • Mounts on any flat hard surface: desks, tables, baseboards, walls
  • 48" lengths can handle virtually any desktop/office cables.
  • Click for More Features

A tried and true cable management solution, the J Channel Raceway is the total package: an easy to use, easy to install item that makes cable clutter disappear in seconds. With the adhesive backing, just press it on the desired surface and you're good to go! A great permanent or temporary solution for condos and apartments, as the adhesive leaves minimal residue behind.

Part # Color Length Inside Width Outside Width Inside Height Outside Height Price / Unit
WR-JCCO48 Black 48" 1/2" 1" 1-1/2" 2-1/4"
Qty:  
Quick Ship
  • Encloses wires on three sides, protecting them and eliminating clutter and trip hazards.
  • Simple to install, use and remove, making it great for home users and professionals.
  •  

    Adhesive Base Height 2-1/4"
    Channel Height 1-1/2"
    Channel Depth 1"
    Length 48"

     

    J channel with specifications

    Related Articles



     

    How-To Corner




     

    Request A Quote

    Did you know that we can give you a quote for most of our products, including shipping?

    You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)

    Questions & Answers

    Question:

    J Channel - What do you do when you come to a corner?

    Asked by Anonymous user on 02.28 PM Wednesday, 11 February, 2015

    Answer:
    • - The J Channel product does not have accessory pieces. It may be possible to cut/notch the ends of the channel in such a way that you can make the channel conform to any corner, but we do not have a guide or instructions to accomplish this.

      Steve S. on 10.58 AM Thursday, 18 February, 2016
    Question:

    How many CAT6 Ethernet Cables would fit - This is for a school where we have a black 4" rubber base board. We have about 16 runs of about 25' from a wall mounted switch to desktop PCs. Could just stack 2 J Channels on top of each other above the base board with 8-12 cables in each?

    Asked by Anonymous user on 02.38 PM Monday, 08 June, 2015

    Answer:
    • - Based on the dimensions of the J Channel Raceway, you should be able to accommodate at least 12 of the Cat6 cables in a single unit.

      Steve S. on 11.00 AM Thursday, 18 February, 2016
    Question:

    Is this PVC? How much weight can it hold? What's the best way to cut nice clean lines? I have a miter saw with a fine tooth blade for plastics/acrylics. I'm going to use this to hold small power bricks & satellite SWMs. Plan to screw it down instead of the double sided tape. Thank you.

    Asked by Anonymous user on 12.59 AM Monday, 26 June, 2017

    Answer:
    • - Hello, Yes. it is made from a Rigid PVC material. The weight depends on how thick or large your cords are that you are putting inside the J Channel. And you can use screws to screw the channel in place instead of using the double sided tape. For more information please give us a call toll free at 866-222-0030

      Anonymous user on 02.58 PM Tuesday, 27 June, 2017

    Do you have any questions about this product?
    Let our experts and customers resolve all your doubts