Home Tools & Cases Heat Guns, Torches, Hot Air Tools SolderPRO 120 Multifunction Tool



Solder-It™ SolderPRO 120 Multifunction Tool

Portable & Quick Heat Knife and Blow Torch in One

solder pro 120 tool

More Images
Close Window

Solder-It™ SolderPRO 120 Multifunction Tool

    Additional Images
  • SolderPRO 120 Torch
  • SolderPRO 120 Torch Kit

This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player
Copyright ©2013 CableOrganizer.com

Low Price GuaranteeWhat's special about the SolderPRO 120?

  • Equivalent to a 120-watt soldering iron & a 2500° F blow torch
  • No cords, 100% portable
  • See-through fuel tank for easy status checks on remaining life
  • Approximately 4 hours of run-time each filling
  • Ready to use 30 seconds after ignition
  • Click for More Features

The Solder-It™ Solderpro 120 is a lightweight portable butane fueled hot knife/heat gun combo tool. Arm the Solderpro 120 with its soldering and cutting tip for cutting nylon rope or braided sleeving with ease. Remove the cutting tip for a 2500° F blow torch which is great for shrinking heat shrink or loosening rusted nuts and bolts.

Butane tools are great to use on projects where electrical sources can be hard to find such as boats, on outdoor equipment or other out of the way jobs. The Solderpro 120 is a great addition to any toolbox. (Warning: Do not leave toolbox outside in extreme heat as butane is a flammable liquid that can ignite in extreme conditions)

 SolderPRO

  • Refillable see-through Butane fuel tank
  • 4 hours of run time on each filling
  • 1 mm conical soldering tip
  • Blow torch head

 SolderPRO 120 Kit

  • Refillable See Through Butane Fuel Tank
  • 4 hours of run time on each filling
  • 1mm Conical Soldering Tip
  • 2mm Chisel Tip
  • Hot Air Blower with Deflector
  • Hot Knife
  • Coil of Solder
  • Tip Cleaning Sponge
  • Blow Torch Head
  • Spare Orifice Assembly
  • Parts Compartment
Part # SDHKNIFE SDHKNIFE-KIT
Price
Qty:  
Qty:  
Included
  • Blow torch head
  • 1 mm conical soldering tip
  • 1mm Conical Soldering Tip
  • 2mm Chisel Tip
  • Hot Air Blower with Deflector
  • Hot Knife
  • Coil of Solder
  • Tip Cleaning Sponge
  • Blow Torch Head
  • Spare Orifice Assembly
  • Parts Compartment
Approximate Temp. Soldering Tip 480°F - 1000 °F (250°C - 550°C) 480°F - 1000 °F (250°C - 550°C)
Torch 2400°F (1300°C) 2400°F (1300°C)
Gas Container Capacity 38 ml 38 ml
Operating Capacity 4 hours of run time on each filling 4 hours of run time on each filling
Weight 1 lb 2 lbs
PART # DESCRIPTION WEIGHT PRICE
SDHKNIFE Solder-It™ SolderPRO 120 Hot Knife/Heat Gun Only 1.0 lb
Qty:  
SDHKNIFE-KIT Solder-It™ SolderPRO 120 Hot Knife/Heat Gun KIT 2.0 lbs
Qty:  
Solder-Pro 100KSolder-Pro™ 100K 4-in-1 Kit
Price $109.99		 Solder It 180Solder-Pro™ 180
From $134.99
 
Hand Held Hot KnifeHand Held Hot Knife
Price $61.50		 glovesDeerskin Work Gloves
Price $46.78
 
heat gun wellerSoldering Gun Weller® 8200
Price $49.99

Wire Loom ScissorsScissor
Price $12.00
Everyone can use a heavy-duty pair of scissors. These stainless steel shears work well on our PET NF products as well as a variety of other jobs around your offices or plants.

Currency
Converter


Shop with Confidence