Home Raceway, Duct, Conduit Cable Tray Systems Snake Tray Cable Management SnakeTray Technical Data

Snake Tray® Technical Data

Cable Management Solutions’ bendable Snake Tray is manufactured from ASTM A510 - High strength steel wire, to form a unique, completely hand bendable cable management system. Welding pre-formed steel hoops to a central 5/16" spine every four inches produces Snake Tray, allowing for its unique hand bendable design, while providing easy entry and exit for cables at any point along the length of the tray. The trays are constructed from pre-galvanized wire in accordance with ASTM standards to produce a resilient finish, which with stands most indoor applications, or mild sheltered outdoor environments.

Snake Tray is produced in standard eight foot sections and with its unique high density nesting characteristics allow for more tray to be shipped in less space than our competitors, thus reducing shipping costs and on-site storage requirements.

201 Series Snake Tray®
The 201 series Snake Tray is utilized both below raised floors and overhead either mounted to walls, cabinets or suspended from the ceiling structure. Available in two configurations, single or double pocket pathway design, the 201 series tray can accommodate up to 50 square inches of cable path or 510 data cables at the NEC required 50% fill rate for ventilated cable tray. Snake Tray’s unique center spine design allows the tray to be easily bent by hand to make risers and drops, create turns where needed and avoid obstacles. Mounting rings or Snake Eyes are located along the center spine, allowing easy attachment of threaded rod for suspended applications, and require only one (1) CB-10 (connector bolt) to join sections together.

501 Series Wall Snake®
The 501 series Wall Snake has been designed with mounting rings or Snake Eyes running vertically along the center spine to allow it to be directly attached to a wall. These mounting rings eliminate the need for additional brackets or hanging hardware to complete the installation. As with all Snake Tray products, the Wall Snake can be bent by hand in any direction along any plane to create a custom fit for any application. Available in four sizes, 4, 9, 25 and 36 square inch pathways, Wall Snake is manufactured from galvanized steel wires in accordance with ASTM A641-89 - General requirements for regular galvanized wire. Wall Snake is the perfect solution for long linear runs along a wall where space is at a premium.

601 Series Ladder Snake®
The 601 Series Ladder Snake is designed for installation on traditional ladder trays. Two styles of tray are available, one installs on new ladder tray increasing the cable carrying capacity of the tray and the other installs on existing ladder creating a second cable path above the legacy cable. The Ladder Snake offers up to 54 square inches of pathway and can accommodate up to 560 Data/Com cables at the prescribed NEC required 50% fill. As with all Snake Tray products, the 601 Series center spine is hand bendable, no clipping, cutting or tools required.

Related Items