Snake Tray® is the world’s only hand bendable steel cable tray that bends by hand in any direction without cutting/clipping for use to convey cables overhead, wall mount or installations below computer access floors. Snake Tray is a cost effective alternative to J-Hooks, conduit and ladder rack.
Please note that Snake Tray® products are subject to a 30% restocking fee if returned.
Snake Tray Instructional Video
Single Snake Tray® 201 Series
Available in four sizes. The tray is a single pocket design that can accommodate up to 24 square inches of cable path equal to a 12" generic basket or ladder type tray.
501 Series Wall Snake Tray®
Utilized for long linear installations where space is at a premium. The best solution for tight spaces, they are designed to allow the tray to be directly attached to a wall without brackets.
Double Snake Tray® 201 Series
A double packet design provides a natural separation for both voice data cables and fiber cables, allows for 50 square inches of cable path holding up to 510 cables.
601 Series Ladder Snake
Designed for ladder racks, it instantly bends by hand without cutting or clipping to ensure a smooth transition from one ladder rack to another. You just snap onto a new ladder to instantly gain greater cable capacity.
Snake Canyon® Cable Trays
Compatible with preexisting or new access floor hardware, these drop-in, latch-together cable trays are made of 100% recycled steel to help builders and architects achieve their LEED goals.
Snake Tray® Hardware
Designed to complete hanging and suspended Snake Tray installations, these hardware accessories include anchors that are approved for use in block, masonry and concrete, as well as threaded rods ranging from 1 to 8 feet, and brackets for use with powder-actuated tools.
Snake Tray® Snake Air™ Data Center Airflow Manager
Controlling the airflow within a data center has become a crucial part of maintaining proper temperature. The Snake Air™ blocks the cool air inside the room, preventing overheating while allowing cable access.
Snake Tray® Intersections
Designed to create fully customized Snake Tray configurations, these steel wire connectors allow you to arrange Snake Trays into T or X intersections, split or join double and single Snakes, and require just a few connector bolts for installation.
Snake Tray® Accessories
Designed to join Cable Snake trays end-to-end, create intersections, transition cables through drops and suspend tray sections from the ceiling, these bolts, waterfalls and connectors are made of high-strength, zinc-plated steel.
Snake Tray® Mounting Brackets
Perfect for mounting Snake Trays under raised access flooring, along walls, or on top of cabinets and enclosures, these brackets are made of zinc-galvanized steel, and are available in both single and double tray configurations.