Great Lakes Lake Effect Enclosure

lake-effect-enclosure-smIn server rooms and data centers, one of the most important aspects of managing computer equipment is keeping it cool. When servers and other network components run, they produce heat, and when you have a whole room full of electronics, things can get toasty pretty fast. And here’s the problem: despite the fact that computers can really crank out the BTUs, heat can actually cause a lot of damage. Overheated components, in a best-case scenario, don’t run as efficiently as they should. But it can get a lot worse – when running too hot, computer equipment can be irreversibly damaged, completely shut down, and force you to foot the bill for both new equipment and network downtime. Needless to say, that can turn into a very expensive situation.

The moral of this story is that you should never skimp on thermal management – no good can come of it. But there are so many choices out there for server room thermal management – how is one to decide? In addition to having a great air conditioning system in place for the entire room, you need to consider how you’ll tackle the excess heat issue server enclosure by server enclosure. When you have components rack mounted in cabinets, they’re more prone to heat build-up because everything is confined. So, you can opt for rack fans, vented doors and side panels, or get really sophisticated with a liquid-based cooling system that pumps coolant through a system of pipes to absord and carry away heat. Or, if you want a complete solution that will cause you the least amount of hassle, you could always just go with a Lake Effect enclosure from Great Lakes.

The Lake Effect server enclosure is built for cooling; in fact, we like to think of it as the ultimate cooling enclosure. From the outside, it looks like any other cabinet, but it’s the patented thermal technology hidden inside that makes it so special. The key is the Lake Effect’s pressurized front plenum chamber, which lines the entire front panel of the enclosure top to bottom. It uses vanaxial fans, which were originally invented for use in the aerospace industry, to maintain a constant 65° temperature inside the front plenum. This keeps the ambient temperature of the entire enclosure at a safe level, and protects your equipment from the malfunctions that occur from overheating. The Lake Effect uses absolutely no liquid coolants and refrigerants, and doesn’t require any wall, ceiling, or raised-floor penetrations – just set it directly on the floor, and you’re ready to go.

View the Product Page