Ever done a repair or home improvement project just to find, when you were done, that while the main thing you were set on accomplishing came out great, something else was accidentally damaged in the process? Like maybe you managed to finagle that couch up a tight, curving stairwell, but not without putting a hole in the plaster wall? Or perhaps you refinished your hardwood floors with beautiful results, only to peel the paint off your baseboard molding when you pulled away the painter’s tape that had been protecting it from stray polyurethane? Arrrggghhh!!!
Of course, these examples are purely hypothetical (yeah, right). But apparently I’m not the only goof-up out there taking one step forward, immediately followed by one step back. It’s not something that might be obvious from the get-go, but any sort of through-wall work (cable runs, conduit additions) can turn a necessary but annoying-to-repair drywall cut into an even bigger mess. Think of what would happen if you were to put pressure and friction on the cut edges of a work hole with wiring or pull tape, and how banged up things would get of you kept hitting it with tools and material as you worked. Not too pretty.
That’s where the BES Drywall Protector Plate comes very much in handy. It’s exactly what it sounds like – a plate that installs over drywall cuts to reinforce work holes and provide a protective shield against assault by tools, materials, and hands. Just line it up with your drywall hole, slide the adjustable tabs to lock it in place, and go about your work without constantly worrying that you’re dinging up the sheetrock more than you should be.
The drywall protector plate works with wallboard that’s anywhere from ½ to ⅝ of an inch thick, and is completely reusable. And the best thing is that it maintains the status quo for post-job restoration. There are no screw holes to patch, and no excessive drywall damage to contend with – just repair the work hole (as you expected to do), and enjoy the lack of nasty last-minute surprises.