Home Raceway, Duct, Conduit Cable Raceways Basic Plastic Cable Raceways Raceways On-A-Roll™
Premiere Raceway On-A-Roll™
Low Cost Folding Surface Mount Raceway
Close Window
Raceway On-A-Roll™
This requires one or more of the following: javascript enabled, Flash Video Player, and Quicktime or Windows Media Player |
Premiere Raceway Products’ Raceway On-A-Roll™ is a unique rigid PVC cable management product. This surface raceway folds into a rigid channel that can be used for concealing and managing cables and wires of all types. The low profile design and adhesive backing only serve to make it easier to work with and install. |
- Equipped with adhesive backing for fast and easy installation
- Surface is paintable (using latex paint) to easily blend in with walls or fixtures
- Low cost solution to providing fast and easy wire management
- Available in 4 standard channel lengths to accommodate a wide range of wires and cables
- Smooth, easy to clean surface
- Made in the USA
- Available in white and beige to match most décor
This product has starred in our Product Showcase Blog! Click here to check it out.
Non-Metallic Surface Mount Raceway Fill Capacity Chart
| Cable | Category / Designation | Raceway Size | How many cables for 20% fill? | How many cables for 40% fill? |
| Telephone | 2-Pair, 24 AWG | 1/2" | 2 | 4 |
| 1" | 4 | 8 | ||
| 3-Pair, 24 AWG | 1/2" | 1 | 3 | |
| 1" | 3 | 7 | ||
| 4-Pair, 24 AWG | 1/2" | 1 | 2 | |
| 1" | 2 | 4 | ||
| 25-Pair, 24 AWG | 1/2" | 0 | 0 | |
| 1" | 0 | 1 | ||
| Coaxial | RG58/U | 1/2" | 1 | 2 |
| 1" | 2 | 4 | ||
| RG59/U | 1/2" | 0 | 1 | |
| 1" | 1 | 2 | ||
| RG62/U | 1/2" | 0 | 1 | |
| 1" | 1 | 2 | ||
| RG6/U | 1/2" | 0 | 1 | |
| 1" | 1 | 2 | ||
| Twinaxial | 100 Ohm | 1/2" | 0 | 0 |
| 1" | 0 | 1 | ||
| Shielded Twisted Pair | Type 1 | 1/2" | 0 | 0 |
| 1" | 0 | 1 | ||
| Type 2 | 1/2" | 0 | 0 | |
| 1" | 0 | 0 | ||
| Type 3 | 1/2" | 0 | 1 | |
| 1" | 1 | 2 | ||
| Fiber Optic | Two Strand (Duplex) Multimode 62.5/125µm |
1/2" | 1 | 2 |
| 1" | 2 | 4 | ||
Due to the nature of this product, it may twist during assembly, but will lay flat once the adhesive base is applied to a flat surface.
| PART # | DESCRIPTION | NOMINAL SIZE | DIMENSIONS | COLOR | WEIGHT | PRICE |
| Q-PR-FWF-255 | 1/4" Raceway On-A-Roll™, 50' | 1/4" | 0.255" W x 0.125" H x 50' L | Beige | 4.75 lbs | |
| Q-PR-FWF-145 | 3/8" Raceway On-A-Roll™, 50' | 3/8" | 0.375" W x 0.375" H x 50' L | White | 5.0 lbs |
How to Use the Raceway On-A-Roll™
Installation Instructions:
- Remove Raceway On-A-Roll™ from the box at either side cut out
- Measure length needed for the job. Then pull out the measured length from the box. The inside is marked every 12". Cut with shears or common kitchen scissors.
- Fold the Raceway into a "J" shape as seen below and peel off liner and fasten adhesive side to your marked surface. Use mechanical fastener if needeed.
- Insert wire or cable into the channel. Close one end by folding into a square and snapping shut.
- If angles are needed, snap close before inserting wires. Cut Raceway using standard mitre methods. Re-open to insert wires and snap shut.
This product has starred in our Product Showcase Blog! Click here to check it out.
RELATED ARTICLES
- The 10 Commandments of Cable Management
- 5 Easy Ways to Hide Speaker Wire
- Organizing Bedroom Cables: Transform Clutter Nightmares into Sweet Dreams
- 5 Things That Home Design Shows Don't Always Tell You
HOW-TO CORNER -
- How to Have a Great Home Theater System
- Office Mod: Update Your Workspace in 5 Simple Steps
- How to Determine Which Product Diameter You Need
REVIEW SNAPSHOT®
by PowerReviews(based on 1 review)
Ratings Distribution
Reviewed by 1 customer
Displaying review 1
Pros
- Good Adhesive
Cons
- Expensive
- Frustation
- Hard to shape
- Most are wasted
Best Uses
Comments about 1/4" Raceway On A Roll-50 Ft:
Don't ever try this product, you will be really disappointed. It's extremely difficult to shape it, most of the roll are wasted because it breaks easily while shaping it. If you ever buy it, just be ready to waste your money.
Displaying review 1
|
|
|
 Wirehider® Flexible Tab Surface RacewayFrom $22.01 / pack of 6 Bases Far easier to install and use than metallic raceways, these cord channels feature flexible tab raceways that are concealed by sturdy covers for a professionally finished appearance. |
|
|
Corner Duct Raceways and Fittings
Facebook Comments