The Pail Pal Tool Cart Caddy can be used by tradesmen of all types. This multi-purpose cart is designed to be both lightweight and strong. Pail Pal's sturdy casters have been tested to support up to 350lbs. The 3-1/2 inch urethane coated wheels are large and rugged so they move quietly and fluidly without getting caught in cracks in the flooring or ground.
Includes a break kit to prevent rolling on inclined surfaces
Made in the USA
The cutout in the side of the Pail Pal perfectly fits a 5-gallon bucket or pail and the compartments on the bottom allow you to store your tools and other accessories for easy access. When a tool bucket organizer is added, a very functional tool caddy is created.
The Pail Pal is molded from HDPE, a structural foam plastic known for it's industrial strength and non-conductive, non-corrosive properties. Many tool boxes, auto ramps, and heavy duty carts are made from the same materials. The HDPE will not chip, dent, or rust and is bound to withstand time.
Pail Pal also comes equipped with a removable non-skid surface that can be used for seating when detailing or fixing the lower parts of your car or trailer, and a brake kit to prevent the cart from rolling on an inclined surface.
2 - Handle Keepers #2
2 - Long Legs #4
2 - Short Legs #6
2 - Fixed Casters #8
8 - 5/16" Carriage Bolts #10
8 - 5/16" Hex Nuts #12
16 - 1" Pan Head Screws #14
Tools Required for Assembly
Ratchet with 1/2" socket
On flat work surface, place bottom (#3) on its side. Install long legs (#4) using two carriage bolts (#10), two flat washers (#11) and two hex nuts (#12). See Figure 1.
Install short legs (#6) using two carriage bolts (#10), two flat washers (#11) and two hex nuts (#12). See Figure 2.
Place top (#1) upside down on a flat work surface. Install handle (#5) using the two handle keepers (#2) and four drywall screws (#13). See Figure 3.
Install top (#1) onto the bottom assembly using four carriage bolts (#10), four flat washers (#11) and four hex nuts (#12). See Figure 4.
Place the entire assembly upside down and install two fixed casters (#8) at the end opposite of the handle using eight pan head screws (#14). Install two swivel casters (#9) at the handle end using eight pan head screws (#9).
Place the unit right side up and install the rubber mat (#7). Your cart is now ready for use. See Figure 5.
Hook and Loop
With the Cable Carrier, you can carry extra cables on your tool belt and be prepared for any cable problems. It can also be used as a temporary hanger for cable runs during events.
WI-K-I Wizard Industries Tool Kaddie Porta-Nizer K-I
Tool Kaddie Porta-Nizer K-I is a well-balanced tool storage solution for your tools and jobsite equipment. This large capacity tool caddy features 2 adjustable shelves, 3 storage bins, 1 tool tray, 6 pockets, and screwdriver slots. The dual doors and top open to provide easy access to all tools that are stored within the K1.
Rock N’ Roller Multi Carts
The Rock N’ Roller Multi Carts are the perfect way to easily haul any heavy equipment. They can change shapes by telescoping to customize your needs for transportation of any size loads. The revolutionary design is very lightweight, rugged, affordable and ergonomically efficient.
Do you have any question about this product? Let our experts and customers resolve all your doubts
Did you know that we can give you a quote for most of our products, including shipping?
We do everything we can think of to provide you with the product specs, images and ordering info you need, but if we're missing something or still have room to improve, please let us know. Your comments, suggestions and questions are the best tools we have for serving you better!